Male & Female Flange Jis 16k is a type of flange that must be matched to each other. In this combinations, one flange face has an area that extends beyond the normal flange face. This flange is referred to as the Male. On the other hand the mating flange or the other flange will have a matching depression machined into its face. This mating flange is referred to as the Female flange
Table of Content
Custom Male & Female Flange Jis 5k facings are commonly found on the heat exchanger shell to channel as well as cover flanges. In the Male & Female Flange Jis 10k , the female face is about 3/16” deep, whereas the male face is about ¼” in its height. Both, the Male & Female Flange Din En 1092-1 are smooth finished. The outer diameter of the female face in the Male & Female Flange Asme B16.5 Class 300 acts as a guide and aids in locating as well as retaining the gasket.
Advantages of using the Male & Female Flange Class 600 include better sealing properties & better, enhanced precise location. Apart from this, the Male & Female Flange Awwa C207 Class D helps in exacting the compression of the sealing material, by utilizing the other more suitable sealing and specialized sealing materials. While using the Male & Female Flange A105 has its own set of advantages, there are certain disadvantages that are observed by the Stainless Steel Male & Female Flange Manufacturer.
One of the major disadvantage or drawback of the Male & Female Flange 150 lbs includes the fact that normal RF flanges are far more common and are readily available with regard to flanges, valves and sealing materials in comparison to the Male & Female Flange ansi b16. 5. Because the standards to produce the Pn16 Male & Female Flange is very stringent, manufacturers generally produce the alloy steel Male & Female flange based on orders of a buyer.
Male & Female Flange Manufacturers In India observe that these connections require very rigid and strict rules while both designing and manufacturing the Male & Female Flange Asme B16.5 piping systems to ensure proper mating. Improper mating will not yield results as the male and female parts will not match in the Api 6A Male & Female Flange, which would render these flanges useless.
The alloy of any duplex stainless steel Male & Female flange grade offers good resistance to corrosion as well as other enhanced mechanical properties like high tensile strength, good toughness and hardness. Therefore the carbon steel Male & Female flange are found in industries like - oil and gas, plumbing, water supply systems, paper and pulp industries etc.
Male & Female Flanges type |
Male & Female Flanges Price in India |
Male & Female Flanges Price in USD |
Male & Female Flanges Price in UAE Dirham |
---|---|---|---|
Stainless Steel Male & Female Flanges |
INR 3866.98 / Kg |
USD $44.87 / Kg |
AED 185.22 UAE Dirham |
Male Female Flange |
INR 6962.31 / Kg |
USD $90.45 / Kg |
AED 358.974 UAE Dirham |
Carbon Steel Male & Female Flanges |
INR 1772.47 / Kg |
USD $20.68 /Kg |
AED 84.333 UAE Dirham |
Small Male and Female Flange |
INR 8329.00 / Kg |
USD $100.14 /Kg |
AED 431.29 UAE Dirham |
Large Male and Female Flange |
INR 7649.47 / Kg |
USD $100.35 /Kg |
AED 390.33 UAE Dirham |
Male-and-Female (M&F) . One flange face has an area that extends beyond the normal flange face (Male). The other flange or mating flange has a matching depression (Female) machined into it's face.
Male Female Flange Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
---|---|
ASME B16.5 Male Female Flange Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
Male Female Flange Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Male Female Flange |
Male Female Flange Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Male Female Flange |
UNI | 6Bar 10Bar 16Bar 25Bar 40Bar Male Female Flange |
JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Male Female Flange |
Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized Male Female Flange |
EN | 6Bar 10Bar 16Bar 25Bar 40Bar Male Female Flange |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Most common types of Male Female Flange | Forged / Threaded / Screwed / Plate |
Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
Production technique |
|
Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
Special design | As per your drawing AS, ANSI, BS, DIN and JIS |
Origin | Indian / West Europe / Japan / USA / Korean |
Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
Male Female Flange Uses & application |
|
Manufacturer of | ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
|
Export to | Saudi Arabia, Peru, Egypt, Indonesia, Brazil, Spain, USA, Canada, Ukraine, Singapore, Thailand, Oman, Ireland, Korea, Iran, India, Dubai |
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Nominal Size (in.) |
RF, LJ, Large Male and Large Tongue |
Small Male(3) |
Small Tongue |
ID of Large and Small Tongue |
Large Female and Large Groove |
Small Female (3) |
Small Groove |
ID of Large and Small Groove |
Raised Face 150 and 300 Pound Standards (2) |
RF, Large and Small Male and Tongue 400, 600, 900, 1500, & 2500 lb. Standards (2) |
Depth of Groove or Female |
R |
S |
T |
U |
W |
X |
Y |
Z |
||||
1/2 |
1.38 |
0.72 |
1.38 |
1 |
1.44 |
0.78 |
1.44 |
0.94 |
0.06 |
0.25 |
0.19 |
3/4 |
1.69 |
0.94 |
1.69 |
1.31 |
1.75 |
1 |
1.75 |
1.25 |
0.06 |
0.25 |
0.19 |
1 |
2 |
1.19 |
1.88 |
1.5 |
2.06 |
1.25 |
1.94 |
1.44 |
0.06 |
0.25 |
0.19 |
1 1/4 |
2.5 |
1.5 |
2.25 |
1.88 |
2.56 |
1.56 |
2.31 |
1.81 |
0.06 |
0.25 |
0.19 |
1 1/2 |
2.88 |
1.75 |
2.5 |
2.12 |
2.94 |
1.81 |
2.56 |
2.06 |
0.06 |
0.25 |
0.19 |
2 |
3.62 |
2.25 |
3.25 |
2.88 |
3.69 |
2.31 |
3.31 |
2.81 |
0.06 |
0.25 |
0.19 |
2 1/2 |
4.12 |
2.69 |
3.75 |
3.38 |
4.19 |
2.75 |
3.81 |
3.31 |
0.06 |
0.25 |
0.19 |
3 |
5 |
3.31 |
4.62 |
4.25 |
5.06 |
3.38 |
4.69 |
4.19 |
0.06 |
0.25 |
0.19 |
3 1/2 |
5.5 |
3.81 |
5.12 |
4.75 |
5.56 |
3.88 |
5.19 |
4.69 |
0.06 |
0.25 |
0.19 |
4 |
6.19 |
4.31 |
5.69 |
5.19 |
6.25 |
4.38 |
5.75 |
5.12 |
0.06 |
0.25 |
0.19 |
5 |
7.31 |
5.38 |
6.81 |
6.31 |
7.38 |
5.44 |
6.88 |
6.25 |
0.06 |
0.25 |
0.19 |
6 |
8.5 |
6.38 |
8 |
7.5 |
8.56 |
6.44 |
8.06 |
7.44 |
0.06 |
0.25 |
0.19 |
8 |
10.62 |
8.38 |
10 |
9.38 |
10.69 |
8.44 |
10.06 |
9.31 |
0.06 |
0.25 |
0.19 |
10 |
12.75 |
10.5 |
12 |
11.25 |
12.81 |
10.56 |
12.06 |
11.19 |
0.06 |
0.25 |
0.19 |
12 |
15 |
12.5 |
14.25 |
13.5 |
15.06 |
12.56 |
14.31 |
13.44 |
0.06 |
0.25 |
0.19 |
14 |
16.25 |
13.75 |
15.5 |
14.75 |
16.31 |
13.81 |
15.56 |
14.69 |
0.06 |
0.25 |
0.19 |
16 |
18.5 |
15.75 |
17.62 |
16.75 |
18.56 |
15.81 |
17.69 |
16.69 |
0.06 |
0.25 |
0.19 |
18 |
21 |
17.75 |
20.12 |
19.25 |
21.06 |
17.81 |
20.19 |
19.19 |
0.06 |
0.25 |
0.19 |
20 |
23 |
19.75 |
22 |
21 |
23.06 |
19.81 |
22.06 |
20.94 |
0.06 |
0.25 |
0.19 |
24 |
27.25 |
23.75 |
26.25 |
25.25 |
27.31 |
23.81 |
26.31 |
25.19 |
0.06 |
0.25 |
0.19 |
DN |
d1 |
d2 |
d3 |
d4 |
d5 |
d6 |
d7 |
d8 |
f1 |
f2 |
½” |
1,38 (35,1) |
1,44 (36,6) |
1,38 (35,1) |
1,44 (36,6) |
1,00 (25,4) |
0,94 (23,9) |
1,81 (46,0) |
1,75 (44,5) |
0,25 (6,4) |
0,19 (4,8) |
¾” |
1,69 (42,9) |
1,75 (44,5) |
1,69 (42,9) |
1,75 (44,5) |
1,31 (33,3) |
1,25 (31,8) |
2,12 (53,8) |
2,06 (52,3) |
0,25 (6,4) |
0,19 (4,8) |
1″ |
2,00 (50,8) |
2,06 (52,3) |
1,88 (47,7) |
1,94 (49,3) |
1,50 (38,1) |
1,44 (36,6) |
2,44 (62,0) |
2,25 (57,2) |
0,25 (6,4) |
0,19 (4,8) |
1¼” |
2,50 (63,5) |
2,56 (65,0) |
2,25 (57,2) |
2,31 (58,7) |
1,88 (47,8) |
1,81 (46,0) |
2,94 (74,7) |
2,62 (66,6) |
0,25 (6,4) |
0,19 (4,8) |
1½” |
2,88 (73,2) |
2,94 (74,7) |
2,50 (63,5) |
2,56 (65,0) |
2,12 (53,8) |
2,06 (52,3) |
3,31 (84,1) |
2,88 (73,2) |
0,25 (6,4) |
0,19 (4,8) |
2″ |
3,62 (92,0) |
3,69 (93,7) |
3,25 (82,6) |
3,31 (84,1) |
2,88 (73,0) |
2,81 (71,4) |
4,06 (103,1) |
3,62 (92,0) |
0,25 (6,4) |
0,19 (4,8) |
2½” |
4,12 (104,6) |
4,19 (106,4) |
3,75 (95,2) |
3,81 (96,8) |
3,38 (85,8) |
3,31 (84,1) |
4,56 (115,8) |
4,12 (104,6) |
0,25 (6,4) |
0,19 (4,8) |
3″ |
5,00 (127,0) |
5,06 (128,5) |
4,62 (117,5) |
4,69 (119,1) |
4,25 (108,0) |
4,19 (106,4) |
5,44 (138,2) |
5,00 (127,0) |
0,25 (6,4) |
0,19 (4,8) |
4″ |
6,19 (157,2) |
6,25 (158,8) |
5,69 (144,5) |
5,75 (146,1) |
5,19 (131,8) |
5,12 (130,0) |
6,62 (168,1) |
6,19 (157,2) |
0,25 (6,4) |
0,19 (4,8) |
5″ |
7,31 (185,7) |
7,38 (187,5) |
6,81 (173,0) |
6,88 (174,8) |
6,31 (160,3) |
6,25 (158,8) |
7,75 (196,9) |
7,31 (185,7) |
0,25 (6,4) |
0,19 (4,8) |
6″ |
8,50 (215,9) |
8,56 (217,5) |
8,00 (203,2) |
8,06 (204,7) |
7,50 (190,5) |
7,44 (189,0) |
8,94 (227,0) |
8,50 (215,9) |
0,25 (6,4) |
0,19 (4,8) |
8″ |
10,62 (269,8) |
10,69 (271,5) |
10,00 (254,0) |
10,06 (255,5) |
9,38 (238,3) |
9,31 (236,5) |
11,06 (281,0) |
10,62 (269,8) |
0,25 (6,4) |
0,19 (4,8) |
10″ |
12,75 (323,5) |
12,81 (325,4) |
12,00 (304,8) |
12,06 (306,3) |
11,25 (285,8) |
11,19 (284,2) |
13,19 (335,0) |
12,75 (323,5) |
0,25 (6,4) |
0,19 (4,8) |
12″ |
15,00 (381,0) |
15,06 (382,5) |
14,25 (362,0) |
14,31 (363,5) |
13,50 (342,9) |
13,44 (341,4) |
15,44 (392,2) |
15,00 (381,0) |
0,25 (6,4) |
0,19 (4,8) |
14″ |
16,25 (412,8) |
16,31 (414,3) |
15,50 (393,7) |
15,56 (395,2) |
14,75 (374,7) |
14,69 (373,1) |
16,69 (423,9) |
16,25 (412,8) |
0,25 (6,4) |
0,19 (4,8) |
16″ |
18,50 (469,9) |
18,56 (471,5) |
17,62 (447,6) |
17,69 (449,3) |
16,75 (425,5) |
16,69 (423,9) |
18,94 (481,0) |
18,50 (469,9) |
0,25 (6,4) |
0,19 (4,8) |
18″ |
21,00 (533,4) |
21,06 (535,0) |
20,12 (511,0) |
20,19 (512,8) |
19,25 (489,0) |
19,19 (487,4) |
21,44 (544,6) |
21,00 (533,4) |
0,25 (6,4) |
0,19 (4,8) |
20″ |
23,00 (584,2) |
23,06 (585,8) |
22,00 (558,8) |
22,06 (560,3) |
21,00 (533,4) |
20,94 (531,9) |
23,44 (595,4) |
23,00 (584,2) |
0,25 (6,4) |
0,19 (4,8) |
24″ |
27,25 (692,2) |
27,31 (693,7) |
26,25 (666,8) |
26,31 (668,3) |
25,25 (641,4) |
25,19 (639,8) |
27,69 (703,3) |
27,25 (692,2) |
0,25 (6,4) |
0,19 (4,8) |
|
|
Male Female Flange Class 900 |
Male Female Flange Flat Face |
Male Female Flange Pn16 |
Kf Male Female Flange |
Male Female Flange Class 2500 |
Male Female Flange Slip On |
Male Female Flange Din 2527 |
Male Female Flange Weight 150# |
Male Female Flange Din 2576 |
Male Female Flange With 1/2 Npt
|
Male Female Flange Pn 64 |
Male Female Flange Ansi B16.5 150 |
Male Female Flange Class 150 |
Male Female Flange Threaded |
Male Female Flange Pn10 |
Male Female Flange B16.47 |
Male Female Flange Pn40 |
Male Female Flange Rtj 900 |
Male Female Flange Pn 160 |
Male Female Flange Rtj |
Male Female Flange Class 1500 |
Male Female Flange Npt |
Male Female Flange Dn150 Pn16 |
Male Female Flange Jis 5k |
Male Female Flange Class 600 |
Male Female Flange Jis B2220 |
Male Female Flange Asme B16.5 Class 300 |
Male Female Flange Ring Type Joint |
Male Female Flange Din 2633 |
Male Female Flange Rtj 1500 |
Male Female Flange Class 300 |
Male Female Flange With Threaded Hole |
Male Female Flange Din En 1092-1 |
Male Female Flange Jis 10k |
We offer ASME B16.5 Male Female Flanges through a worldwide network These Male & Female Flange is use in various industrial applications like :
Stainless Steel Male Female Flange | ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
Carbon Steel Male Female Flange | ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
Titanium Male Female Flange | ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
Alloy Steel Male Female Flange | ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91 |
Copper Nickel Male Female Flange | ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
Copper Male Female Flange | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
Inconel Male Female Flange | ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 Male Female Flange |
Brass Male Female Flange | 3602 / 2604 / H59 / H62 / etc. |
Monel Male Female Flange | ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
Hastelloy Male Female Flange | ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges |
Aluminium Male Female Flange | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
Alloy 20 Male Female Flange | ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
Duplex Male Female Flange | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Nickel Male Female Flange | ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
Incoloy Male Female Flange | ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges |
Super Duplex Male Female Flange | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Other Male Female Flange material | Tin bronze, Alumunum bronze, Lead bronze |
Nimonic Male Female Flange | Nimonic 75, Nimonic 80A, Nimonic 90 |
254 Smo Male Female Flange | ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |
|
|