ASTM A182 F317 Stainless Steel Flanges Ansi B16.5

Get ANSI B16.5 SS 317 Blind Flanges, Werkstoff No 1.4449 Slip On Flange, ANSI B16.47 317 Pipe Flange Stock At Lower Prices Compared To USA & UK

Buy UNS S31700 Plate Flange, ASME B16.48 317 Raised Face Flange At Factory Price In India, Check EN 1092-1 Stainless Steel F317 Long Weld Neck Flange Price List

The 317 stainless steel flanges tends to have an enhanced high tensile strength as well as a high to resistance corrosion. 317 stainless steel is a modified version of grade 316 stainless steel. The astm a182 f317 has a high tensile strength and good resistance to corrosion. Apart from these two properties, 317 grade stainless steel is tougher as compared to grade 304 stainless steel.

317 Stainless Steel Flanges Manufacturers In India
317 Stainless Steel Flanges Manufacturers In India
ASTM A182 F317 Flanges
ASTM A182 F317 Flanges
SS 317 Blind Flange
SS 317 Blind Flange

Although the 317 stainless steel flanges manufacturer can use any fusion and resistance methods to weld the alloy, Oxyacetylene welding method is not preferred for the astm a182 f317. In order to obtain good results on welding, filler metals like AWS E/ER317 or 317L can be used in the 317 stainless steel flange jis 10k.

Stainless Steel 317 Flange can be hot worked using all conventional hot working procedures. The alloy is heated to a temperature range up to  1149 °C - 1260°C . It is recommended that the Astm 317 stainless steel flanges  must not be heated to temperatures below 927°C . Post-work annealing can be done on the 317 ss threaded flange to retain the alloy’s corrosion resistance property.

Operations like Stamping, drawing, shearing  and heading can be done successfully on the astm a182 f317 flange blind. Like most austenitic stainless steel grades, 317 ss threaded flange is treated with a post-work annealing in order to reduce internal stress. Astm 317 stainless steel flanges are annealed between a temperature range of  1010°C - 1121°C, which is then followed by cooling. Although the astm a182 f317 flange does not react to heat treatment, the alloy can be hardened by cold working.

It is recommended to use chip breakers for the machining of 317 ss threaded flange. The hardenability of the astm a182 f317 flanges ansi b16.5 will reduce if constant feeds and low speeds are used for machining. The 317 stainless steel flange pressure rating includes the JIS: 5K, 10 K, 16 K 20 K,30 K,40 K, 63 K;. While the astm a182 f317 flange pressure rating includes classes 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS. 317 ss flange dimensions include ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

317 stainless steel flanges manufacturers in India supply these components to industries like chemical equipment, textile, pulp and paper. To learn more about the supplier’s 317 stainless steel flange price list, click on the link given here.

 

Stainless Steel 317 Flanges Specifications

Specifications Stainless Steel 317 Flanges
ASME B16.5 Stainless Steel 317 Flanges size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Stainless Steel 317 Flanges Standards ANSI/ASME B16.5, B16.47 Series A & B, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges,
Stainless Steel 317 Flanges Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
Stainless Steel 317 Flanges Standard ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Stainless Steel 317 Flanges Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Stainless Steel 317 Flanges Standard JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Stainless Steel 317 Flanges Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
Main Types Forged / Threaded / Screwed / Plate
Flange supporting material Gasket, Ring Joint, Flange Bolts
Stainless Steel 317 Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production technique
  • Forged, Heat treated and machined
Connect Type/ Flange Face Type Small Male-Female (SMF), Small Tongue & Groove, Large Tongue & Groove, Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF),
Most common types of Stainless Steel 317 Flanges
  • Socket Weld Ring Flange (SWRF), Stainless Steel 317 Flanges
  • Threaded Ring Flange, Stainless Steel 317 Flanges
  • Lap Joint Ring Flange (LJRF), Stainless Steel 317 Flanges
  • Ring Type Joint Flange (RTJF), Stainless Steel 317 Flanges
  • Weld Neck Ring Flange (WNRF), Stainless Steel 317 Flanges
  • Slip-On Ring Flange (SORF), Stainless Steel 317 Flanges
  • Blind Ring Flange (BLRF), Stainless Steel 317 Flanges
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Stainless Steel 317 Flanges Threaded Flanges, Socketweld Flanges, Slip-On Flanges, Blind Flanges, Weld Neck Flanges

Test X-ray detector, UI trasonic flaw detector, Magnetic particle detector, Direct-reading Spectrograph, Hydrostatic testing machine
Origin Indian / West Europe / Japan / USA / Korean
Equipment electric bevelling machine, Sand-blasting machine, Press machine, Bending machine, Pushing Machine etc
Specialized manufacturer of
  • DIN 2566 pn16
  • DIN 2566 en 1092 1
  • DIN 2566 pn10
  • Rtj Flanges
  • Pn16 Flanges
  • Stainless Steel 317 Lap Joint Flanges
  • Stainless Steel 317 Loose Flanges
  • Stainless Steel 317 Orifice Flanges
  • Stainless Steel 317 AS 4087 Water Flanges
  • Stainless Steel 317 Flanges
  • Stainless Steel 317 Slip-On Flanges
  • Stainless Steel 317 Socketweld Flanges
  • Stainless Steel 317 Plate Flanges
  • Stainless Steel 317 Large Diameter Flanges
  • Stainless Steel 317 Sorf Flanges
  • Stainless Steel 317 Blind Flanges
  • Stainless Steel 317 Table Flanges
  • Stainless Steel 317 Weld Neck Flanges
Stainless Steel 317 Flanges Standard

ANSI DIN, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE, BS Flange, EN Flange etc.

  • B.S: BS4504 , BS3293, BS1560, BS10
  • AS 2129: Table D; Table E; Table H
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised flanges
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
Key markets and industries for Stainless Steel 317 Flanges
  • Petrochemicals and acids.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Bitumen upgraders.
Export to Korea, Oman, Iran, USA, Ireland, Dubai, Peru, Egypt, Spain, Canada, Thailand, Singapore, Brazil, India, Ukraine, Indonesia, Saudi Arabia etc
Stainless Steel 317 Flanges Application
  • To Connect Pipe & Tubes in Shipbuilding, Chemical, Construction, Metallurgy, Petroleum, Power, Gas etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

 

Manufacturing Standards of Stainless Steel 317 Flanges

Click On Below Links For ASTM A182 317 SS Flanges Standard

 

 

Types of Stainless Steel 317 Flange

 

Size Chart Of Stainless Steel 317 Flange

Size Chart Of Stainless Steel 317 Flange
Size Chart Of Stainless Steel 317 Flange

 

SS 317 Flanges Weight Chart

15mm (1/2") Stainless Steel 317 Flanges Weight Chart

Pipe Normal Diam.
O.D. Flange
Thk. Of Flange Min
Diam.
of
Hub
Diameter of Raised Face
Length Hub.Y
Thread Length
Diam.
of Bolt
Circle
Diam.
of Bolt
Holes
Number
of Bolts
Diam. of
Bolts
(inch)
KG
LB
inch
dn
O
C
X
G
Y
T
BC
BH
BN
BD
1/2"
15
89.00
11.20
30.20
35.10
15.70
15.70
60.50
15.80
4
1/2"
0.4
0.9
3/4"
20
98.50
12.70
38.10
42.90
15.70
15.70
69.90
15.80
4
1/2"
0.7
1.5
1"
25
108.00
14.20
49.30
50.80
17.50
17.50
79.30
15.80
4
1/2"
0.8
1.8
1-1/4"
32
117.50
15.70
58.70
63.50
20.60
20.60
88.90
15.80
4
1/2"
1.2
2.6
1-1/2"
40
127.00
17.50
65.00
73.20
22.40
22.40
98.60
15.80
4
1/2"
1.5
3.3
2"
50
152.50
19.10
77.70
91.90
25.40
25.40
120.70
19.10
4
5/8"
2.3
5.1
2-1/2"
65
178.00
22.40
90.40
104.60
28.40
28.40
139.70
19.10
4
5/8"
3.7
8.1
3"
80
190.50
23.90
108.00
127.00
30.20
30.20
152.40
19.10
4
5/8"
4.1
9
3-1/2"
90
216.00
23.90
122.20
139.70
31.80
31.80
177.80
19.10
8
5/8"
5.1
11.2
4"
100
228.50
23.90
134.90
157.20
33.30
33.30
190.50
19.10
8
5/8"
5.9
13
5"
125
254.00
23.90
163.60
185.70
36.60
36.60
215.90
22.40
8
3/4"
7
15.4
6"
150
279.50
25.40
192.00
215.90
39.60
39.60
241.30
22.40
8
3/4"
8.4
18.5
8"
200
343.00
28.40
246.10
269.70
44.50
44.50
298.50
22.40
8
3/4"
13
28.6
10"
250
406.50
30.20
317.80
323.90
49.30
49.30
362.00
25.40
12
7/8"
18
39.5
12"
300
482.50
31.80
365.30
381.00
55.60
55.60
431.80
25.40
12
7/8"
29
64
14"
350
533.50
35.10
400.10
412.80
57.20
57.20
476.30
28.50
12
1"
39
86
16"
400
597.00
36.60
457.20
469.90
63.50
63.50
539.80
28.50
16
1"
47
103
18"
450
635.00
39.60
505.00
533.40
68.30
68.30
577.90
31.80
16
1 1/8"
57
126
20"
500
698.50
42.90
558.80
584.20
73.20
73.20
635.00
31.80
20
1 1/8"
76
167
24"
600
813.00
47.80
663.40
692.20
82.60
82.60
749.30
35.10
20
1 1/4"
97
214

 

Stainless Steel 317 Flange Dimensions

Click on below links for Stainless Steel 317 Flanges dimensions

 

Stainless Steel 317 Pipe Flange Dimensions

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
  • ASME B1.20.1, Pipe Threads, General Purpose
  • ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250
  • ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
  • ASME B16.11, Forged Fittings, Socket Welding and Threaded
  • ASME B16.25, Buttwelding Ends
  • ASME B16.36, Orifice Flanges
  • ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60
  • ASME B31.1, Power Piping
  • ASME B31.3, Process Piping
  • ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)

 

317 Stainless Steel Flanges Pressure Rating

Temp. °F
150
300
400
600
900
1500
2500
-20 to 100
275
720
960
1440
2160
3600
6000
200
235
620
825
1240
1860
3095
5160
300
215
560
745
1120
1680
2795
4660
400
195
515
685
1025
1540
2570
4280
500
170
480
635
955
1435
2390
3980
600
140
450
600
900
1355
2255
3760
650
125
445
590
890
1330
2220
3700
700
110
430
580
870
1305
2170
3620
750
95
425
570
855
1280
2135
3560
800
80
420
565
845
1265
2110
3520
850
65
420
555
835
1255
2090
3480
900
50
415
555
830
1245
2075
3460
950
35
385
515
775
1160
1930
3220
1000
20
350
465
700
1050
1750
2915
1050
20
345
460
685
1030
1720
2865
1100
20
305
405
610
915
1525
2545
1150
20
235
315
475
710
1185
1970
1200
20
185
245
370
555
925
1545
1250
20
145
195
295
440
735
1230
1300
20
115
155
235
350
585
970
1350
20
95
130
190
290
480
800
1400
20
75
100
150
225
380
630
1450
20
60
80
115
175
290
485
1500
20
40
55
85
125
205
345

 

Most Trusted And Reliable 317 Stainless Steel Flange Jis 10k, ASME SA182M Grade 317 SORF Flange, BS 10 Stainless Steel F317 Orifice Flange In All Sizes Suppliers In Mumbai, India

Stainless Steel 317 Flanges Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317 0.08 max 2 max 1.00 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.845 min

 

Stainless Steel 317 Flanges Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

 

Stainless Steel 317 Flanges Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317 1.4449 S31700 SUS 317

 

Application of SS 317 Flange

  •  UNS S31700 Stainless Steel Flange uses in Heating element tubing
  •  A182 Stainless Steel 317 Blind Flange uses in Spiral Welded tube for burner pipes and flues
  •  DIN 1.4449 Stainless Steel Flange uses in Woven or welded screens for high temperature mineral processing
  •  Stainless Steel 317 Flange uses in Heat Exchangers
  •  ASTM A182 F317 Stainless Steel Flange uses in Aircraft exhaust manifolds
  •  SA182 Stainless Steel 317 Flange uses in Expansion joints
  •  317 Stainless Steel Flange uses in Furnace parts
  •  ASME SA182 Stainless Steel 317 Flange uses in Bellows

 

Stainless Steel 317 Flanges Other Types

DIN 1.4449 Stainless Steel SAE Flanges
Stainless Steel 317 BLRF Flanges
SS 317 Screwed Flanges Exporter
BS 304S11 Reducing Flanges Wholesaler
AISI 317 Flanges
ASTM A182 Stainless Steel 317 Exhaust Flanges
Stainless Steel UNS S31700 Puddle Flanges
317 Stainless Steel EN 1092-1 Flanges
A182 F317 SS RTJ Flanges
SUS 317 Split Flanges Stockist
Stainless Steel 317 Flanges Manufacturer
ASME SA182 Stainless Steel 317 Tank Flanges
317 SS SORF Flanges
317 Stainless Steel WNRF Flanges Supplier

 

ASTM A182 Stainless Steel 317 Pipe Flanges Stainless Steel 317 Raised Face Slip On Flanges
ASTM A182 Stainless Steel 317 Plate Flanges A182 Stainless Steel 317 Pipe Flanges
ASTM A182 Stainless Steel 317 Backing Flanges Stainless Steel 317 Exhaust Flanges
ASTM A182 Stainless Steel 317 Tube Flanges ASME SA182 Stainless Steel 317 Header Flanges
ASTM A182 Stainless Steel 317 Stub End Flanges Stainless Steel 317 Raised Face Weld Neck Flanges
ASTM A182 Stainless Steel 317 Exhaust Flanges ASME SA182 Stainless Steel 317 Slip On Plate Flanges
ASTM A182 Stainless Steel 317 Header Flanges Stainless Steel 317 Slip On Flanges
ASTM A182 Stainless Steel 317 Shower Rod Flanges ASTM A182 Stainless Steel 317 Sae Flanges
ASTM A182 Stainless Steel 317 Socket Weld Flanges ASTM A182 Stainless Steel 317 WNRF Flanges
ASTM A182 Stainless Steel 317 Sbc Header Flanges Stainless Steel 317 Raised Face Blind Flanges
ASTM A182 Stainless Steel 317 Split Flanges ASME SA182 Stainless Steel 317 Blind Flanges
ASTM A182 Stainless Steel 317 Slip-On Pipe Flanges Stainless Steel 317 Blind Flanges
ASTM A182 Stainless Steel 317 Slip On Flanges Stainless Steel 317 Weld Neck Flanges
ASTM A182 Stainless Steel 317 Screwed Flanges ASTM A182 Stainless Steel 317 Clad Flanges
ASTM A182 Stainless Steel 317 Square Flanges ASTM A182 Stainless Steel 317 Ansi Flanges
Ansi 150 ASTM A182 Stainless Steel 317 Flanges ASTM A182 Stainless Steel 317 BLRF Flanges
ASTM A182 Stainless Steel 317 Blank Flanges Stainless Steel 317 Orifice Flanges
ASTM A182 Stainless Steel 317 Bsp Flanges ASME SA182 Stainless Steel 317 Orifice Flanges
ASTM A182 Stainless Steel 317 Companion Flanges Stainless Steel 317 Orifice Flanges
ASTM A182 Stainless Steel 317 Class 150 Flanges ASTM A182 Stainless Steel 317 Duct Flanges
ASTM A182 Stainless Steel 317 Cover Flanges A182 Stainless Steel 317 Orifice Flanges
Large Diameter ASTM A182 Stainless Steel 317 Flanges ASTM A182 Stainless Steel 317 SWRF Flanges
Table E ASTM A182 Stainless Steel 317 Flanges ASME B16.5 Stainless Steel 317 Socket weld Flanges
ASTM A182 Stainless Steel 317 Floor Flanges Stainless Steel 317 Flanges
ASTM A182 Stainless Steel 317 Forged Flanges ASME SA182 Stainless Steel 317 Flanges
Gaskets For ASTM A182 Stainless Steel 317 Flanges Stainless Steel 317 Flanges
ASTM A182 Stainless Steel 317 Handrail Flanges ASTM A182 Stainless Steel 317 Manifold Flanges
High Pressure ASTM A182 Stainless Steel 317 Flanges ASTM A182 Stainless Steel 317 Flanges
ASTM A182 Stainless Steel 317 Lap Joint Flanges ASTM A182 Stainless Steel 317 Flanges
Custom ASTM A182 Stainless Steel 317 Flanges Stainless Steel 317 Socket weld Flanges
Class 600 ASTM A182 Stainless Steel 317 Flanges ASME SA182 Stainless Steel 317 Socket weld Flanges
ASTM A182 Stainless Steel 317 Din Flanges Stainless Steel 317 Socket weld Flanges
ASTM A182 Stainless Steel 317 Long Weld Neck Flanges Stainless Steel 317 Long weld Neck Flanges
ASTM A182 Stainless Steel 317 Metric Flanges ASME SA182 Stainless Steel 317 Long weld Neck Flanges
ASTM A182 Stainless Steel 317 Muffler Flanges Stainless Steel 317 Long weld Neck Flanges
ASTM A182 Stainless Steel 317 Pump Flanges ASTM A182 Stainless Steel 317 Orifice Flanges
ASTM A182 Stainless Steel 317 Pressed Flanges Stainless Steel 317 Ring Type Joint Flanges
ASTM A182 Stainless Steel 317 Puddle Flanges ASME SA182 Stainless Steel 317 Ring Type Joint Flanges
ASTM A182 Stainless Steel 317 Pad Flanges Stainless Steel 317 RTJ Flanges
ASTM A182 Stainless Steel 317 Reducing Flanges Stainless Steel 317 RTJ Flanges
ASTM A182 Stainless Steel 317 Raised Face Flanges ASTM A182 Stainless Steel 317 RTJ Flanges
ASTM A182 Stainless Steel 317 Ring Flanges BS4504 Stainless Steel 317 RTJ Flanges
ASTM A182 Stainless Steel 317 Reducing Flanges Stainless Steel 317 Reducing Flanges
ASTM A182 Stainless Steel 317 Wnrf Flanges ASME SA182 Stainless Steel 317 Reducing Flanges
ASTM A182 Stainless Steel 317 Split Flanges Stainless Steel 317 Reducing Flanges
ASTM A182 Stainless Steel 317 Turbo Flanges ASTM A182 Stainless Steel 317 Forged Flanges
ASTM A182 Stainless Steel 317 Vacuum Flanges ASTM A182 Stainless Steel 317 Reducing Flanges
ASTM A182 Stainless Steel 317 Reducing Flanges Stainless Steel 317 Forged Flanges

 

Check Dimensions

Flange Schedule/Class
Pipe Size - Pipe Flanges
Flange Connection Type
Flange Material
Max. Pressure
ASME B16.5 Class 150
1/2"
FNPT
Stainless Steel 317 Flanges
150 psi
ASME B16.5 Class 150
1/2"
Socket Weld
Stainless Steel 317 Flanges
275 psi
ASME B16.5 Class 150
1/2"
Welded
Stainless Steel 317 Flanges
150 psi
ASME B16.5 Class 150
3/4"
FNPT
Stainless Steel 317 Flanges
150 psi
ASME B16.5 Class 150
3/4"
Socket Weld
Stainless Steel 317 Flanges
275 psi
ASME B16.5 Class 150
1-1/4"
Socket Weld
Stainless Steel 317 Flanges
275 psi
ASME B16.5 Class 150
1-1/2"
Socket Weld
Stainless Steel 317 Flanges
275 psi
ASME B16.5 Class 150
2"
FNPT
Stainless Steel 317 Flanges
150 psi
ASME B16.5 Class 150
2"
Socket Weld
Stainless Steel 317 Flanges
275 psi
ASME B16.5 Class 150
2-1/2"
Socket Weld
Stainless Steel 317 Flanges
275 psi
ASME B16.5 Class 150
3"
Socket Weld
Stainless Steel 317 Flanges
275 psi
ASME B16.5 Class 150
4"
FNPT
Stainless Steel 317 Flanges
150 psi
ASME B16.5 Class 150
4"
Socket Weld
Stainless Steel 317 Flanges
275 psi
ASME B16.5 Class 300
1/2"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
1/2"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
1"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
1"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
1-1/4"
FNPT
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
1-1/4"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
1-1/2"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
1-1/2"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
2"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
2"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
2-1/2"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
2-1/2"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
3"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
3"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
4"
Slip On
Stainless Steel 317 Flanges
720 psi
ASME B16.5 Class 300
4"
Slip On
Stainless Steel 317 Flanges
720 psi

 

Stainless Steel 317 Forged and Plate Flanges

Stainless Steel 317 Flanges
Stainless Steel 317 Blind Flanges Stainless Steel 317 Reducing Flanges
Stainless Steel 317 Lap Joint Flanges Stainless Steel 317 Plate Flanges
Stainless Steel 317 Orifice Flanges Stainless Steel 317 Forged Flanges
Stainless Steel 317 Slip-On Flanges Stainless Steel 317 Flanges
Stainless Steel 317 Weld Neck Flanges Stainless Steel 317 Socket Weld Flanges
Stainless Steel 317 Ring Type Joint Flanges

 


Buy Directly From Austenitic Stainless Steel 317 Class 300 SWRF Flange, BS4504 317 Ss Threaded Flange Manufacturers In Mumbai
View SUS317 Stainless Steel Flange Dimensions, Pressure Rating, Mechanical Properties And Specifications