Incoloy 825 Round Bar Suppliers
ASTM B425 UNS N08825 Bar Stock, ASTM B425 Incoloy 825 Bright Bar & Incoloy DIN 2.4858 Hex Bars Distributor in India at discounted prices
We are manufacturer of Alloy 825 Hex Bar and Incoloy Rod, Incoloy UNS N08825 Round Bars & Incoloy 825 Square Bars at low prices in mumbai, india
One of the benefits of using the 2.4858 Incoloy 825 Round Bar is its high resistance to corrosion. Incoloy 825 has a high content nickel along with having a very stable austenite structure. This high nickel content in the Incoloy Alloy 825 Bar has good resistance to chloride ion stress corrosion cracking.
Incoloy 825 Rods
Incoloy 825 Round Bar Suppliers
Alloy 825 Hex Bar
Table of Content
- Incoloy 825 Rod Price
- ASTM B425 UNS No 8810 Round Bar Specification
- Inconel 825 Round Bar Sizes
- Incoloy 825 Round Bar Suppliers
- Incoloy 825 Round Bar Stock
- Alloy 825 Round Bar Chemical Composition
- 2.4858 Round Bar Mechanical Properties
- Incoloy 825 UNS N08825 Bar Equivalent Grades
- Incoloy 825 Round Bar Weight Calculator
Apart from nickel, the additions of metals like molybdenum and copper enable the Incoloy 825 Rods to resist reductive containing agents and acids. Chromium in the ASTM B425 Gr 825 offers resistance to oxidising conditions, such as nitric acid solutions, nitrates and oxidising salts. The alloy is stabilised by the addition of titanium .Stabilizing the Incoloy 825 Bar is known to resist pitting and intergranular attack that could take place after fabrication. This also includes welding, during which, the Alloy 825 Round Bar reaches a the critical sensitisation temperature range between 650°C – 760°C, when the alloy is heated.
The ASTM B425 UNS N08825 offers exceptional resistance to corrosion from acids like sulphuric and phosphoric acids. The alloy is often, considered to be one of the most cost effective alloys in sulphuric acid service.Inconel 825 Round Bar has been approved for use in pressure vessel that operate in temperatures up to 525°C. Brittle phases may form in Incoloy 825 at temperatures above the range of 540°C. Therefore, it is not normally used in applications at these temperatures as well as higher temperatures, where creep rupture properties of the alloy would be design factors.
Applications of the Incoloy 825 Round Bar includes, Sulphuric acid piping and vessels, Pickling tank heaters, pickling tanks and equipment, Phosphoric acid evaporators, Chemical process equipment, Propellor shafts, Ammonium sulphate vessels, Calorifiers, Tank trucks, Electrostatic precipitator electrodes, Expansion bellows, Marine exhaust systems, Power station ash hoppers, Hot vessels for food, water and seawater.
Inconel 825 Bar Price
Incoloy 825 Round Bar Price in India |
Quantity |
Price |
|---|---|---|
Price of Alloy 825 Rod 45.0 Dia x 250mm long |
1 |
$342.82 |
Price of Alloy 825 Rod 45.0 Dia x 250mm long |
2 |
$595.72 |
Price of Alloy 825 Rod 45.0 Dia x 250mm long |
3 |
$831.76 |
Price of Alloy 825 Rod 45.0 Dia x 250mm long |
4 |
$1,036.89 |
Price of Alloy 825 Rod 45.0 Dia x 500mm long |
1 |
$500.18 |
Price of Alloy 825 Rod 45.0 Dia x 500mm long |
2 |
$910.44 |
Price of Alloy 825 Rod 45.0 Dia x 500mm long |
3 |
$1,257.48 |
Price of Alloy 825 Rod 45.0 Dia x 1000mm long |
1 |
$783.99 |
Price of Alloy 825 Rod 45.0 Dia x 1000mm long |
2 |
$1,539.88 |
Price of Alloy 825 Rod 45.0 Dia x 2000mm long |
1 |
$1,414.84 |
*Approx price, please contact for final price.
Alloy 825 Rod, Bars, Forgings
- BS 3076 NA16
- ASTM B 425
- ASTM B 564
- ASME SB 425
- ASME SB 564
- ASME Code Case N-572
- DIN 17752
- DIN 17753
- DIN 17754
- VdTUV 432
| Specification | ASTM B425 UNS N08825 |
|---|---|
| Grade | Incoloy 825 – UNS N08825 |
| UNS N08825 Hex Bar size | 2-100mm A/F |
| ASTM B425 Alloy 825 Round bar size | Diameter: 3-~825mm |
| ASTM B425 Alloy 825 Square bar size | 4 to 100mm |
| N08825 Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Alloy 825 Rectangles Size | 33 x 30mm to 295 x 1066mm |
| ASTM B425 N08825 Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| UNS N08825 Section | 3.0 to 12.0mm thickness |
| Incoloy 825 AMS 5666 Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| N08825 Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| ASTM B425 N08825 Billet Size | 1/2" to 495mm Diameter |
| Round Bar Standard Dimensions | Diameter / Height: |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline, Polished |
| Condition | Hardened & tempered, annealed |
| Technique | Incoloy 825 Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod |
| Processing | Bar cutting to 650mm |
| Form | Incoloy 825 Round, Welding Rod, T-Bar, Rod, Precision Ground Bar, Channel Bar, Square, Flat Bar, Blocks, Round Rod, Hollow, Rings, Rectangle, Hex (A/F), Triangle, Threaded, Profiles, Billet, Ingot, I/H Bar, Half Round Bar, Forging etc. |
| Our stockyad location for fast delivery across India | Hyderabad, Noida, Shivamogga, Pimpri-Chinchwad, Agra, Coimbatore, Chennai, Tiruchirappalli, Tirunelveli, Bhubaneswar, Mumbai, Pune, Bengaluru, Ahmedabad, Thiruvananthapuram, Dhanbad, Navi Mumbai |
| Our Incoloy 825 Round bar conforms to NACE MR0175/ISO 15156 | |
Type |
SIZES (mm) |
SIZES (Inches) |
ISO Tolerance |
|---|---|---|---|
Cold Drawn and Polish |
3.00 - 75.00 |
1/8 - 3.00 |
h8-h9-h10-h11 |
Cold Drawn and Ground |
10.00 - 75.00 |
5/6 - 2.50 |
h8-h9-h10-h11 |
Peeled and Polished |
40.00 - 150.00 |
1.50 - 6.00 |
h11, h11-DIN 1013 |
Peeled and Ground |
20.00 - 50.00 |
3/4 - 2.00 |
h9-h10-h11 |
Incoloy 825 Bars Standard lengths of 2010 mm up to 8250 mm. Cut to size on request (tolerance +2/-0 mm).
5.0 |
45.0 |
6.0 |
50.0 |
7.0 |
55.0 |
8.0 |
60.0 |
9.0 |
65.0 |
10.0 |
70.0 |
12.0 |
75.0 |
16.0 |
80.0 |
20.0 |
90.0 |
25.0 |
100.0 |
30.0 |
130.0 |
35.0 |
160.0 |
40.0 |
201.0 |
- SW 13 Incoloy 825 Hex Rod
- SW 17 Incoloy 825 Hex Rod
- SW 19 Incoloy 825 Hex Rod
- SW 24 Incoloy 825 Hex Rod
- SW 27 Incoloy 825 Hex Rod
UNS N08825 Inconel Rounds
Alloy 825 T-Bar
Alloy 825 Half-Round Bar
Incoloy 825 Round Bar
Alloy 825 Precision Ground Bar
Alloy 825 Precision Ground Stock
Alloy 825 Triangle Bar
Incoloy 825 Hex Bar
Alloy 825 Hexagonal Bar
Incoloy 825 Threaded Bar
Alloy 825 Rebar
UNS N08825 Inconel Hollow Bar
Incoloy 825 Rod
UNS N08825 Inconel Rectangular Bar
Incoloy 825 Flat Bar
Incoloy 825 Square Bar
H&T |
Hardened and tempered. |
ANN |
Annealed |
PH |
Precipitation hardened. |
CD |
Cold drawn |
P |
Polished |
BD |
Bright drawn |
SRE |
Slit rolled edge |
CG |
Centreless ground |
HF |
Hot finished |
CF |
Cold finished |
HRAP |
Hot rolled annealed and pickled |
P&T |
Peeled and turned |
RT |
Rough turned/peeled |
ST |
Smooth turned |
PR |
Peeled and reeled |
Alloy |
Product form |
Dimension (in mm) |
|---|---|---|
ALLOY 825 (42 Ni/22 Cr/3 Mo) |
Round bar, Rod annealed, peeled |
Dia=16.0, Weight=1.6 kg/m |
ALLOY 825 (42 Ni/22 Cr/3 Mo) |
Round bar, Rod hot rolled, annealed, peeled |
Dia=20.0, Weight=2.6 kg/m |
ALLOY 825 (42 Ni/22 Cr/3 Mo) |
Round bar, Rod hot rolled, annealed, peeled |
Dia=30.0, Weight=6.1 kg/m |
INCOLOY 825 (42 Ni/22 Cr/3 Mo) |
Round bar, Rod hot rolled, annealed |
Dia=40.0, Weight=9.85 kg/m |
INCOLOY 825 (42 Ni/22 Cr/3 Mo) |
Round bar, Rod hot rolled, annealed |
Dia=45.0, Weight=13.0 kg/m |
ALLOY 825 (42 Ni/22 Cr/3 Mo) |
Round bar, Rod annealed, peeled |
Dia=50.0, Weight=16.0 kg/m |
INCOLOY 825 (42 Ni/22 Cr/3 Mo) |
Round bar, Rod hot rolled, annealed, peeled |
Dia=70.0, Weight=31.7 kg/m |
ALLOY 825 (42 Ni/22 Cr/3 Mo) |
Round bar, Rod annealed, peeled |
Dia=90.0, Weight=52.0 kg/m |
ALLOY 825 (42 Ni/22 Cr/3 Mo) |
Round bar, Rod annealed, peeled |
Dia=100.0, Weight=64.0 kg/m |
ALLOY 825 (42 Ni/22 Cr/3 Mo) |
Round bar, Rod annealed, peeled |
Dia=125.0, Weight=99.9 kg/m |
ALLOY 825 (42 Ni/22 Cr/3 Mo) |
Round bar, Rod annealed, peeled |
Dia=150.0, Weight=143.85 kg/m |
ALLOY 825 (42 Ni/22 Cr/3 Mo) |
Round bar, Rod annealed, peeled |
Dia=170.0, Weight=184.8 kg/m |
ALLOY 825 (42 Ni/22 Cr/3 Mo) |
Round bar, Rod annealed, peeled |
Dia=200.0, Weight=255.75 kg/m |
| Grade | Ni | Cr | Fe | Mb | Ti | Cu | Mn | C | S | Al | Si |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Incoloy 825 | 38.0 – 46.0 | 19.5 – 23.5 | 22.0 min | 2.5 – 3.5 | 0.6 – 1.2 | 1.5 – 3.0 | 1.0 max | 0.05 max | 0.03 max | 0.2 max | 0.5 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
| STANDARD | WERKSTOFF NR. | UNS | GOST | AFNOR | JIS | BS | EN | OR |
|---|---|---|---|---|---|---|---|---|
| Incoloy 825 | 2.4858 | N08825 | ЭП703 | NFE30C20DUM | NCF 825 | NA 16 | NiCr21Mo | XH38BT |
UNS N08825 Incoloy Bright Bar |
WERKSTOFF NR. 2.4858 Bright Bar |
Incoloy 825 Bright Bar |
Incoloy Alloy 825 Bright Bar |
825 Incoloy Hexagonal Bar |
ASTM B425 Gr. 825 Hex Bar |
ASTM B425 825 Incoloy Bright Bar |
Incoloy 825 Hex Bar |
Incoloy 825 Square Bar |
825 Incoloy Square Bars |
UNS N08825 Incoloy Hexagonal Bar |
ASTM B425 825 Incoloy Hex Bar |
WERKSTOFF NR. 2.4858 Square Bar |
ASTM B425 825 Incoloy Square Bars |
ASTM B425 Incoloy 825 Square Bar |
UNS N08825 Incoloy Square Bar |
ASTM B425 Incoloy 825 Rectangular Bar |
UNS N08825 Incoloy Rectangular Bars |
Incoloy 825 Rectangular Bar |
825 Incoloy Rectangular Bars |
Incoloy 825 Flat Bar |
ASTM B425 Incoloy 825 Flat Bars |
WERKSTOFF NR. 2.4858 Rectangular Bar |
ASME SB425 Incoloy 825 Rectangular Bar |
WERKSTOFF NR. 2.4858 Flat Bars |
ASTM B425 825 Incoloy Flat Bars |
Incoloy 825 Shaft |
UNS N08825 Incoloy Forged Rod |
ASTM B425 Incoloy 825 Polished Bar |
UNS N08825 Incoloy Polished Bars |
Incoloy 825 Polished Bar |
Incoloy 825 Grade 2 Polished Bars |
Incoloy 825 AMS 5666 Bar Bar |
825 Incoloy Threaded Bars |
WERKSTOFF NR. 2.4858 Polished Bar |
ASTM B425 825 Incoloy Polished Bar |
WERKSTOFF NR. 2.4858 Threaded Bar |
ASTM B425 825 Incoloy Forged Bar |
Incoloy 825 ASTM B425 Threaded Bar |
UNS N08825 Incoloy Threaded Bar |
ASTM B425 UNS N08825 T-Bar |
UNS N08825 Incoloy T-Bar |
Incoloy 825 T-Bar |
Incoloy Welding Rod |
Incoloy 825 Welding Rod |
ASTM B425 UNS N08825 Hollow Bar |
ASTM B425 825 Incoloy T-Bar |
Incoloy 825 Hollow Bar |
Incoloy 825 Precision Ground Stock |
Incoloy 825 Filler Rod |
UNS N08825 Incoloy Hollow Bar |
ASTM B425 825 Incoloy Hollow Bar |
Incoloy 825 Threaded Rod |
Incoloy 825 Rod |
Incoloy 825 ASTM B425 Precision Ground Stock |
UNS N08825 Incoloy Precision Ground Stock |
UNS N08825 Incoloy Rod |
ASTM B425 825 Incoloy Rod |
825 Incoloy Rod |
ASTM B425 GR1 Rod |
B425 N08825 Rounds |
UNS N08825 Incoloy Rounds |
Incoloy 825 Rounds |
Incoloy 825 Grade 2 Rounds |
825 Incoloy Half-Round Bar |
B425 N08825 Half-Round Bar |
ASTM B425 825 Incoloy Rounds |
Incoloy 825 Half-Round Bar |
Incoloy 825 Precision Ground Bar |
825 Incoloy Precision Ground Bar |
UNS N08825 Incoloy Half-Round Bar |
ASTM B425 825 Incoloy Half-Round Bar |
2.4858 Incoloy 825 Bar |
Incoloy 825 Triangle bar |
B425 UNS N08825 Precision Ground Bar |
UNS N08825 Incoloy Precision Ground Bar |
UNS N08825 Incoloy Triangle bar |
ASTM B425 825 Incoloy Triangle bar |
Incoloy 825 Bar |
ASTM B425 Gr 825 |
ASTM B425 UNS N08825 |
UNS N08825 Bar |
|
Incoloy 825 Round Bar |
Alloy 825 Round Bar |
Inconel 825 Round Bar |
2.4858 Incoloy 825 Round Bar |
Incoloy Alloy 825 Bar |
Incoloy 825 Rods |
825 Incoloy Triangle bar |
ASTM B425 Alloy 825 Triangle bar |