10.9 grade bolt manufacturers
Supplies a full range of Grade 10.9 Bolts, Grade 10.9 Screw, Grade 10.9 Nuts at Factory price in India
carries a complete line of Grade 10.9 Bolt Material, Grade 10.9 Stainless Steel Bolt in mumbai, India
The specification standard used to manufacture the Grade 10.9 Stainless Steel Bolt include medium carbon steel, medium carbon steel alloy and low carbon boron steel.These three grades of steel are heat treated by quenching and tempering the Grade 10.9 Bolt Material. The main features of specified Hex Bolt Class 10.9 include its high tensile strength and good wear resistance.
Grade 10.9 Fasteners
10.9 grade bolt manufacturers
Stud Bolt Grade 10.9
Grade 10.9 Nuts
Grade 10.9 Threaded Rod
Grade 10.9 Hex Bolts
Table of Content
- Price of Grade 10.9 Bolts
- Grade 10.9 Fasteners Specification
- Grade 10.9 Bolts Types
- Grade 10.9 Studs Types
- Grade 10.9 Nuts Types
- Grade 10.9 Washers Types
- Grade 10.9 Screws Types
- Size Chart of Grade 10.9 Bolts
- Grade 10.9 Hex Bolts Dimensions
- Grade 10.9 Washers Dimensions
- Dimensions of Grade 10.9 Hex Nuts
- Dimensions of Grade 10.9 Hex Screw
- Grade 10.9 Fasteners Other Types
- Application of Grade 10.9 Fasteners
 |
Exported 10.9 Grade Bolt to Saudi Arabia as per clients drawing |
These features are the reason why the Grade 10.9 Steel Bolts are used in automotive applications and for bolting large and forged parts.The yield strength of the Class 10.9 Bolt is 940 Mpa and the tensile strength of the Grade 10.9 Nuts is 1040 MPa. Hsfg Bolts Grade 10.9 are characterised by uniformity in their threading, dimensional accuracy as well as their corrosion resistance which is why they are primarily used in applications like construction, Engineering, and structural steelwork in industries such as petrochemicals, defence, railways, and mechanical.
The Grade 10.9 Screw is available in a wide range sizes i.e. - standard, coarse and fine sizes. Besides having variability in their sizes, the Class 10.9 Bolt are available in customizable finishes which are done either as required by the buyer or as required by the end use of the product. The Grade 10.9 Steel Bolts can be coated or plated by finishing the surface of the fastener with Black oxide, White Zinc Plating, Yellow Zinc Plating or they could be Hot Dip Galvanised.
High Tensile Grade 10.9 Fasteners Price List |
Price Per Pcs. |
|---|---|
High Tensile Grade 10.9 Socket Head Cap Screw price |
USD $3.10 |
High Tensile Grade 10.9 Allen bolts price |
USD $4.25 |
High Tensile Grade 10.9 Hex head bolts price |
USD $6.05 |
High Tensile Grade 10.9 Nuts price |
USD $1.45 |
High Tensile Grade 10.9 Machine bolts price |
USD $5.10 |
High Tensile Grade 10.9 Screws price |
USD $3.70 |
High Tensile Grade 10.9 Washer price |
USD $1.00 |
High Tensile Grade 10.9 Dowel Pins price |
USD $1.20 |
Grade 10.9 Fasteners Grades |
Grade 10.9 |
Grade 10.9 Fasteners Standard |
ASTM A324, ASME SA324 |
Grade 10.9 Fasteners Size |
Dia M 20 to 100 mm Inch 3/4" to 3.1/2" |
Grade 10.9 Fasteners finish |
Zinc plated / Plain / Hot dip galvanised |
ASTM A324 HT Grade 10.9 Carriage Bolts
ASTM A324 HT Grade 10.9 Allen Cap Bolt
ASTM A324 HT Grade 10.9 Countersunk Bolts
A324 HT Grade 10.9 Flange Bolts
A324 Heavy Hex Bolts
SA324 HT Grade 10.9 Hex Bolts
ASTM A324 HT Grade 10.9 Lag Bolts
A324 HT Grade 10.9 Anchor Bolts
ASTM A324 HT Grade 10.9 Square Bolts
ASTM A324 HT Grade 10.9 Hex Head Bolts
ASME SA324 HT Grade 10.9 U Bolts
ASTM A324 Eye Bolts
A324 HT Grade 10.9 Stud Bolts
ASTM A324 HT Grade 10.9 Double Ended Studs
SA324 HT Grade 10.9 Tie Bars
ASTM A324 HT Grade 10.9 Threaded Rod
ASME SA324 HT Grade 10.9 Tie Rods
SA324 HT Grade 10.9 Heavy Hex Nuts
ASTM A324 HT Grade 10.9 Lock Nut
Grade 10.9 Self Locking Nuts
Grade 10.9 Nylon Insert Nuts
A324 HT Grade 10.9 Acorn Nuts
ASTM A324 HT Grade 10.9 T Nuts
Grade 10.9 Serrated Flange Nuts
Grade 10.9 Nyloc Nuts
A324 HT Grade 10.9 Square Nuts
ASTM A324 HT Grade 10.9 Hex Head Nuts
A324 HT Grade 10.9 Hex Nuts
ASME SA324 HT Grade 10.9 Eye Nuts
SA324 HT Grade 10.9 Wing Nuts
ASTM A324 HT Grade 10.9 Panel Nuts
A324 HT Grade 10.9 Coupling Nuts
ASME SA324 HT Grade 10.9 Dome Nuts
SA324 HT Grade 10.9 Ogee Washers
Grade 10.9 Split Washers
A324 Grade 10.9 Flat Washers
High Tensile Grade 10.9 Star Washers
A324 HT Grade 10.9 Dock Washers
Grade 10.9 Belleville Washers
Grade 10.9 Fender Washer
Grade 10.9 Countersunk Finishing Washer
ASTM A324 HT Grade 10.9 Square Washers
A324 HT Grade 10.9 Spring Washers
Grade 10.9 Lock Washers
ASME SA324 HT Grade 10.9 Spherical Washers
High Tensile Grade 10.9 Socket Head Cap Screw
Grade A324 HT Grade 10.9 Wing Screw
Grade 10.9 Roofing Screw
High Tensile Grade 10.9 Grade A324 Self Tapping Screw
A324 HT Grade 10.9 Eye Screw
Grade 10.9 Concrete Screw
A324 HT Grade 10.9 Thumb Screw
A324 HT Grade 10.9 Deck Screw
Grade 10.9 Wood Screw
A324 HT Grade 10.9 Coach Screw
ASTM A324 HT Grade 10.9 Countersuck Screw
High Tensile Grade 10.9 Lag Screw
High Tensile Grade 10.9 Self Drilling Screw
A324 Grade 10.9 Set Screw
India’s Largest Manufacturer of Class 10.9 Bolt, Hex Bolt Class 10.9, Hsfg Bolts Grade 10.9 in mumbai, India
**All measurements in millimeters**
DIA |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M18 |
M20 |
M22 |
M24 |
M27 |
M30 |
M33 |
M36 |
M39 |
M42 |
M45 |
M48 |
M52 |
Pitch |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
2 |
2.5 |
3 |
3.5 |
4 |
4.5 |
5 |
||||||||
Grade A upto length |
40 |
50 |
60 |
80 |
100 |
120 |
140 |
150 |
Grade A not applicable to these dia’s |
||||||||||||
Head Across Flat (S) Nom = Max Min Grade A Grade B |
7 |
8 |
10 |
13 |
16 |
18 |
21 |
24 |
27 |
30 |
34 |
36 |
41 |
46 |
50 |
55 |
60 |
65 |
70 |
75 |
80 |
6.78 |
7.78 |
9.78 |
12.73 |
15.73 |
17.73 |
20.67 |
23.67 |
26.67 |
29.67 |
33.38 |
35.38 |
Grade A not applicable to these dia’s |
|||||||||
6.64 |
7.64 |
9.64 |
12.57 |
15.57 |
17.57 |
20.16 |
23.16 |
26.16 |
29.16 |
33 |
35 |
40 |
45 |
49 |
53.8 |
510.9 |
63.1 |
68.1 |
73.1 |
78.1 |
|
Head Height (K) Nom Tol + or – Grade A Grade B |
2.8 |
3.5 |
4 |
5.3 |
6.4 |
7.5 |
10.9 |
10 |
11.5 |
12.5 |
14 |
15 |
17 |
18.7 |
21 |
22.5 |
25 |
26 |
28 |
30 |
33 |
0.125 |
0.15 |
0.18 |
0.215 |
Grade A not applicable to these dia’s |
|||||||||||||||||
0.2 |
0.24 |
0.29 |
0.35 |
0.42 |
0.5 |
||||||||||||||||
Across corners e Min Grade A Grade B |
7.66 |
8.79 |
11.05 |
14.38 |
17.77 |
20.03 |
23.36 |
26.75 |
30.14 |
33.53 |
37.72 |
39.98 |
Grade A not applicable to these dia’s |
||||||||
7.5 |
8.63 |
10.89 |
14.2 |
17.59 |
19.85 |
22.78 |
26.17 |
29.56 |
32.95 |
37.29 |
39.55 |
45.2 |
50.85 |
55.37 |
60.79 |
66.44 |
71.3 |
76.95 |
82.6 |
88.25 |
|
Thread Length (b) For lengths < or = 125mm For lengths > 125mm <= 200mm For lengths > 200mm |
14 |
16 |
18 |
22 |
26 |
30 |
34 |
38 |
42 |
46 |
50 |
54 |
60 |
66 |
Not specified as full thread recommended |
||||||
20 |
22 |
24 |
28 |
32 |
36 |
40 |
44 |
48 |
52 |
56 |
60 |
66 |
72 |
78 |
84 |
90 |
96 |
102 |
108 |
116 |
|
33 |
35 |
37 |
41 |
45 |
49 |
53 |
57 |
61 |
65 |
69 |
73 |
79 |
85 |
91 |
97 |
103 |
109 |
115 |
121 |
129 |
|
Major Dia at thread (min) |
3.838 |
4.826 |
5.794 |
7.76 |
9.732 |
11.701 |
13.682 |
15.682 |
17.623 |
19.623 |
21.623 |
23.577 |
26.577 |
29.522 |
32.522 |
35.465 |
38.465 |
41.437 |
44.437 |
47.399 |
51.399 |
Major Dia at thread (max) |
3.978 |
4.976 |
5.974 |
7.972 |
9.968 |
11.966 |
13.962 |
15.962 |
17.958 |
19.958 |
21.958 |
23.952 |
26.952 |
29.947 |
32.947 |
35.94 |
38.94 |
41.937 |
44.937 |
47.929 |
51.929 |
Grade 10.9 Hex Bolts In Bsw/Bsf Threads To Bs 1083-1965
All dimensions in Inches
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
BSW Pitch (TPI) |
20 |
18 |
16 |
14 |
12 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
6 |
5 |
4.5 |
|
BSF PITCH (TPI) |
26 |
22 |
20 |
18 |
16 |
16 |
14 |
12 |
11 |
10 |
9 |
9 |
8 |
8 |
7 |
7 |
Head Across Flat (S) Min Max |
0.438 |
0.518 |
0.592 |
0.702 |
0.812 |
0.912 |
1.000 |
1.190 |
1.288 |
1.468 |
1.640 |
1.815 |
2.005 |
2.175 |
2.520 |
2.700 |
0.445 |
0.525 |
0.600 |
0.710 |
0.820 |
0.920 |
1.010 |
1.200 |
1.300 |
1.480 |
1.670 |
1.860 |
2.050 |
2.220 |
2.580 |
2.760 |
|
Head height (K) Min Max |
0.166 |
0.208 |
0.250 |
0.292 |
0.333 |
0.365 |
0.407 |
0.480 |
0.563 |
0.636 |
0.710 |
0.790 |
0.880 |
0.960 |
1.110 |
1.270 |
0.176 |
0.218 |
0.260 |
0.302 |
0.343 |
0.375 |
0.417 |
0.500 |
0.583 |
0.666 |
0.750 |
0.830 |
0.920 |
1.000 |
1.170 |
1.330 |
|
Across corners e Max |
0.51 |
0.61 |
0.69 |
0.82 |
0.95 |
1.06 |
1.17 |
1.39 |
1.50 |
1.71 |
1.93 |
2.15 |
2.37 |
2.56 |
2.98 |
3.19 |
Thread Length b Min |
Twice the Dia (2D) |
|||||||||||||||
Major Dia at thread BSW (min) |
0.2427 |
0.3046 |
0.3666 |
0.4285 |
0.4904 |
0.5527 |
0.6147 |
0.7390 |
0.8653 |
0.9897 |
1.1140 |
1.2388 |
1.4879 |
1.7369 |
1.9862 |
|
Major Dia at thread BSW (max) |
0.2488 |
0.3112 |
0.3736 |
0.4360 |
0.4985 |
0.5609 |
0.6233 |
0.7482 |
0.8750 |
1.000 |
1.1250 |
1.250 |
1.500 |
1.750 |
2.000 |
|
Major Dia at thread BSF (min) |
0.2432 |
0.3051 |
0.3671 |
0.4290 |
0.4910 |
0.5533 |
0.6153 |
0.7394 |
0.8658 |
0.9902 |
1.1148 |
1.2395 |
1.3640 |
1.4888 |
1.7380 |
1.9876 |
Major Dia at thread BSF (max) |
0.2489 |
0.3113 |
0.3737 |
0.4361 |
0.4985 |
0.5610 |
0.6234 |
0.7482 |
0.8750 |
1.000 |
1.1250 |
1.250 |
1.375 |
1.500 |
||
All dimensions in Inches
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
UNC Pitch (TPI) |
20 |
18 |
16 |
14 |
13 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
6 |
6 |
5 |
4.5 |
UNF Pitch (TPI) |
28 |
24 |
24 |
24 |
20 |
20 |
18 |
16 |
14 |
12 |
NOT RECOMMENDED |
|||||
Head Across Flat (S) Min Max |
0.430 |
0.493 |
0.554 |
0.617 |
0.742 |
0.804 |
0.929 |
1.115 |
1.300 |
1.488 |
1.657 |
1.830 |
2.017 |
2.205 |
2.565 |
2.940 |
0.437 |
0.500 |
0.562 |
0.625 |
0.750 |
0.812 |
0.937 |
1.125 |
1.312 |
1.500 |
1.687 |
1.875 |
2.062 |
2.250 |
2.625 |
3.000 |
|
Head Height (K) Min
Max |
0.153 |
0.201 |
0.233 |
0.281 |
0.313 |
0.361 |
0.393 |
0.463 |
0.543 |
0.597 |
0.678 |
0.773 |
0.838 |
0.934 |
1.074 |
1.203 |
0.163 |
0.211 |
0.243 |
0.291 |
0.323 |
0.371 |
0.403 |
0.483 |
0.563 |
0.627 |
0.718 |
0.813 |
0.878 |
0.974 |
1.134 |
1.263 |
|
Across corners e (MAX) |
0.505 |
0.577 |
0.650 |
0.722 |
0.866 |
0.938 |
1.083 |
1.300 |
1.515 |
1.732 |
1.948 |
2.165 |
2.382 |
2.598 |
3.031 |
3.464 |
Thread Length b (Min) |
2D + 1/4” upto bolt length of 6” and 2D + 1/2” for bolt lengths above 6” |
|||||||||||||||
Major Dia at thread ( Class 2A) Min for UNC |
0.2408 |
0.3026 |
0.3643 |
0.4258 |
0.4876 |
0.5495 |
0.6113 |
0.7353 |
0.8592 |
0.9830 |
1.1064 |
1.2314 |
1.3544 |
1.4794 |
1.7268 |
1.9751 |
Major Dia at thread (2A) Min for UNF |
0.2425 |
0.3042 |
0.3667 |
0.4281 |
0.4906 |
0.5524 |
0.6149 |
0.7391 |
0.8631 |
0.9868 |
NOT RECOMMENDED |
|||||
Major Dia at thread Class 2A Max for UNC |
0.2490 |
0.3113 |
0.3737 |
0.4361 |
0.4985 |
0.5609 |
0.6234 |
0.7482 |
0.8731 |
0.9980 |
1.1228 |
1.2478 |
1.3726 |
1.4976 |
1.7473 |
1.9971 |
DIA |
M16 |
M20 |
M22 |
M24 |
M27 |
M30 |
M36 |
HARDNESS FOR PL. WASHER |
35 TO 45 HRC |
||||||
Hardness for Hot Dip Galvd washer |
26 HRC |
||||||
Outer Dia (Max) d2 |
34 |
42 |
44 |
50 |
56 |
60 |
72 |
Inner Dia (Min) d1 |
18 |
22 |
24 |
26 |
30 |
33 |
39 |
Thickness (S) |
3.1 TO 4.6 |
||||||
Tolerance for OD Minus(-) |
1.6 |
1.9 |
|||||
Tolerance for ID Plus(+) |
0.43 |
0.52 |
0.62 |
||||
All dimensions in mm
DIA |
M12 |
M16 |
M20 |
M22 |
M24 |
M27 |
M30 |
M36 |
Weight in Kgs for 100 nos |
0.703 |
1.46 |
1.96 |
2.43 |
3.06 |
5.02 |
6.32 |
11.50 |
Outer Dia (Max) d2 |
24 |
30 |
37 |
39 |
44 |
50 |
56 |
66 |
Inner Dia (Min) d1 |
13 |
17 |
21 |
23 |
25 |
28 |
31 |
37 |
Thickness (S) |
3 |
4 |
4 |
4 |
4 |
5 |
5 |
6 |
Tolerance for OD Minus(-) |
0.52 |
0.62 |
1 |
1.20 |
||||
Tolerance for ID Plus(+) |
0.27 |
0.33 |
0.52 |
0.62 |
||||
Tolerance for thickness + or – |
0.30 |
0.60 |
||||||
**All measurements in millimeters**
DIA |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M18 |
M20 |
M22 |
M24 |
M27 |
M30 |
M33 |
M36 |
M39 |
M42 |
M45 |
M48 |
M52 |
Pitch |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
2 |
2 |
2.5 |
2.5 |
2.5 |
3 |
3 |
3.5 |
3.5 |
4 |
4 |
4.5 |
4.5 |
5 |
5 |
Across Flat (S) Max Min |
7 |
8 |
10 |
13 |
16 |
18 |
21 |
24 |
27 |
30 |
34 |
36 |
41 |
46 |
50 |
55 |
60 |
65 |
70 |
75 |
80 |
6.78 |
7.78 |
9.78 |
12.73 |
15.73 |
17.73 |
20.67 |
23.67 |
26.16 |
29.16 |
33 |
35 |
40 |
45 |
49 |
53.8 |
510.9 |
63.1 |
68.1 |
73.1 |
78.1 |
|
Thickness (M) Max Min |
3.2 |
4.7 |
5.2 |
6.8 |
8.4 |
10.8 |
12.8 |
14.8 |
15.8 |
18 |
19.4 |
21.5 |
23.8 |
25.6 |
28.7 |
31 |
33.4 |
34 |
36 |
38 |
42 |
2.9 |
4.4 |
4.9 |
6.44 |
8.04 |
10.37 |
12.1 |
14.1 |
15.1 |
16.9 |
18.1 |
20.2 |
22.5 |
24.3 |
27.4 |
29.4 |
31.8 |
32.4 |
34.4 |
36.4 |
40.4 |
|
Across corners (E) Min |
7.66 |
8.79 |
11.05 |
14.38 |
17.77 |
20.03 |
23.35 |
26.75 |
29.56 |
32.95 |
37.29 |
39.55 |
45.2 |
50.85 |
55.37 |
60.79 |
66.44 |
71.3 |
76.95 |
82.6 |
88.25 |
Minor Dia at thread (min) |
3.242 |
4.134 |
4.917 |
6.647 |
8.376 |
10.106 |
11.835 |
13.835 |
15.294 |
17.294 |
19.294 |
20.752 |
23.752 |
26.211 |
29.211 |
31.67 |
34.67 |
37.129 |
40.129 |
42.587 |
46.587 |
Minor Dia at thread (max) |
3.422 |
4.334 |
5.153 |
6.912 |
8.676 |
10.441 |
12.210 |
14.210 |
15.744 |
17.774 |
19.774 |
21.252 |
24.252 |
26.771 |
29.771 |
32.27 |
35.27 |
37.799 |
40.799 |
43.297 |
47.297 |
Grade 10.9 Hex Nuts In Bsw/Bsf Threads To Bs 1083-1965 Threads To Bs 84
All dimensions in inches
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
BSW Pitch (TPI) |
20 |
18 |
16 |
14 |
12 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
– |
6 |
5 |
4.5 |
BSF PITCH (TPI) |
26 |
22 |
20 |
18 |
16 |
16 |
14 |
12 |
11 |
10 |
9 |
9 |
8 |
8 |
7 |
7 |
WIDTH Across Flat (S) Min Max |
0.438 |
0.518 |
0.592 |
0.702 |
0.812 |
0.912 |
1.000 |
1.190 |
1.288 |
1.468 |
1.640 |
1.815 |
2.005 |
2.175 |
2.520 |
2.700 |
0.445 |
0.525 |
0.600 |
0.710 |
0.820 |
0.920 |
1.010 |
1.200 |
1.300 |
1.480 |
1.670 |
1.860 |
2.050 |
2.220 |
2.580 |
2.760 |
|
Thickness (M) Min Max |
0.190 |
0.240 |
0.302 |
0.365 |
0.427 |
0.490 |
0.552 |
0.677 |
0.740 |
0.865 |
0.990 |
1.105 |
1.230 |
1.355 |
1.605 |
1.730 |
0.200 |
0.250 |
0.312 |
0.375 |
0.437 |
0.500 |
0.562 |
0.687 |
0.750 |
0.875 |
1.000 |
1.125 |
1.250 |
1.375 |
1.625 |
1.750 |
|
Across corners (Max inches) |
0.51 |
0.61 |
0.69 |
0.82 |
0.95 |
1.06 |
1.17 |
1.39 |
1.50 |
1.71 |
1.93 |
2.15 |
2.37 |
2.56 |
2.98 |
3.19 |
Minor Dia at thread BSW (min) |
0.1860 |
0.2413 |
0.2950 |
0.3461 |
0.3932 |
0.4557 |
0.5086 |
0.6220 |
0.7328 |
0.8400 |
0.9420 |
1.0670 |
– |
1.2866 |
1.4938 |
1.7154 |
Minor Dia at thread BSW (max) |
0.2030 |
0.2594 |
0.3145 |
0.3674 |
0.4169 |
0.4794 |
0.5338 |
0.6490 |
0.7620 |
0.8720 |
0.9776 |
1.1026 |
– |
1.3269 |
1.5408 |
1.7668 |
Minor Dia at thread BSF (min) |
0.2008 |
0.2543 |
0.3110 |
0.3663 |
0.4200 |
0.4825 |
0.5336 |
0.6432 |
0.7586 |
0.8720 |
0.9828 |
1.1078 |
1.2150 |
1.3400 |
1.5670 |
1.8170 |
Minor Dia at thread BSF (max) |
0.2125 |
0.2684 |
0.3280 |
0.3844 |
0.4395 |
0.5020 |
0.5549 |
0.6669 |
0.7838 |
0.8990 |
1.0120 |
1.1370 |
1.2470 |
1.3720 |
1.6026 |
1.8526 |
All dimensions in inches
DIA |
1/4 |
5/16 |
3/8 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
7/8 |
1 |
1 1/8 |
1 1/4 |
1 3/8 |
1 1/2 |
1 3/4 |
2 |
UNC Pitch (TPI) |
20 |
18 |
16 |
14 |
13 |
12 |
11 |
10 |
9 |
8 |
7 |
7 |
6 |
6 |
5 |
4.5 |
UNF Pitch (TPI) |
28 |
24 |
24 |
24 |
20 |
20 |
18 |
16 |
14 |
12 |
NOT RECOMMENDED |
|||||
Width Across Flat (S) Min Max |
0.430 |
0.493 |
0.554 |
0.617 |
0.742 |
0.804 |
0.929 |
1.115 |
1.300 |
1.488 |
1.657 |
1.830 |
2.017 |
2.205 |
2.565 |
2.940 |
0.437 |
0.500 |
0.562 |
0.625 |
0.750 |
0.812 |
0.937 |
1.125 |
1.312 |
1.500 |
1.687 |
1.875 |
2.062 |
2.250 |
2.625 |
3.000 |
|
Thickness (M) Min Max |
0.214 |
0.261 |
0.323 |
0.370 |
0.432 |
0.479 |
0.542 |
0.631 |
0.740 |
0.844 |
0.949 |
1.037 |
1.147 |
1.251 |
1.470 |
1.684 |
0.224 |
0.271 |
0.333 |
0.380 |
0.442 |
0.489 |
0.552 |
0.651 |
0.760 |
0.874 |
0.989 |
1.087 |
1.197 |
1.311 |
1.530 |
1.754 |
|
Across corners (E) Max |
0.505 |
0.577 |
0.650 |
0.722 |
0.866 |
0.938 |
1.083 |
1.300 |
1.515 |
1.732 |
1.948 |
2.165 |
2.382 |
2.598 |
3.031 |
3.464 |
Minor Dia at thread (min) UNC (2B) |
0.1960 |
0.2520 |
0.3070 |
0.3600 |
0.4170 |
0.4720 |
0.5270 |
0.6420 |
0.7550 |
0.8650 |
0.9700 |
1.0950 |
1.1950 |
1.3200 |
1.5340 |
1.7590 |
Minor Dia at thread (max) UNC (2B) |
0.2070 |
0.2650 |
0.3210 |
0.3760 |
0.4340 |
0.4900 |
0.5460 |
0.6630 |
0.7780 |
0.8900 |
0.9980 |
1.1230 |
1.2250 |
1.3500 |
1.5680 |
1.7950 |
Minor Dia at thread (min) UNF (2B) |
0.2110 |
0.2670 |
0.3300 |
0.3830 |
0.4460 |
0.5020 |
0.5650 |
0.6820 |
0.7980 |
0.9100 |
NOT RECOMMENDED |
|||||
Minor Dia at thread (max) UNF (2B) |
0.2200 |
0.2770 |
0.3400 |
0.3950 |
0.4570 |
0.5150 |
0.5780 |
0.6960 |
0.8140 |
0.9280 |
||||||
All dimensions in mm
DIA |
M16 |
M20 |
M22 |
M24 |
M27 |
M30 |
M36 |
Pitch |
2 |
2.5 |
2.5 |
3 |
3 |
3.5 |
4 |
Head Across Flat (B) Min |
26.16 |
33 |
35 |
40 |
45 |
49 |
510.9 |
Head Across Flat (B) Max |
27 |
34 |
36 |
41 |
46 |
50 |
60 |
Height (H) Min Max |
16.4 |
19.4 |
22.3 |
22.9 |
26.3 |
29.1 |
35 |
17.1 |
20.7 |
23.6 |
24.2 |
27.6 |
30.7 |
36.6 |
|
Across corners C min |
29.56 |
37.29 |
39.55 |
45.20 |
50.85 |
55.37 |
66.44 |
Minor Dia at thread (min) |
14.235 |
17.694 |
19.694 |
21.202 |
24.252 |
26.761 |
32.270 |
Minor Dia at thread (max) |
14.610 |
18.144 |
20.144 |
21.702 |
24.752 |
27.321 |
32.870 |
DIA |
M4 |
M5 |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M18 |
M20 |
M22 |
M24 |
M27 |
M30 |
M33 |
M36 |
M39 |
M42 |
M45 |
M48 |
M52 |
Pitch |
0.7 |
0.8 |
1 |
1.25 |
1.5 |
1.75 |
2 |
2 |
2.5 |
2.5 |
2.5 |
3 |
3 |
3.5 |
3.5 |
4 |
4 |
4.5 |
4.5 |
5 |
5 |
Grade A upto length |
40 |
50 |
60 |
80 |
100 |
120 |
140 |
150 |
Grade A not applicable to these dia’s |
||||||||||||
Head Across Flat (S) Max Min(Grade A) Min (Grade B) |
7 |
8 |
10 |
13 |
16 |
18 |
21 |
24 |
27 |
30 |
34 |
36 |
41 |
46 |
50 |
55 |
60 |
65 |
70 |
75 |
80 |
6.78 |
7.78 |
9.78 |
12.73 |
15.73 |
17.73 |
20.67 |
23.67 |
26.67 |
29.67 |
33.38 |
35.38 |
Grade A not applicable to these dia’s |
|||||||||
6.64 |
7.64 |
9.64 |
12.57 |
15.57 |
17.57 |
20.16 |
23.16 |
26.16 |
29.16 |
33 |
35 |
40 |
45 |
49 |
53.8 |
510.9 |
63.1 |
68.1 |
73.1 |
78.1 |
|
Head Thickness (K) Tol + or – Grade A
Grade B |
2.8 |
3.5 |
4 |
5.3 |
6.4 |
7.5 |
10.9 |
10 |
11.5 |
12.5 |
14 |
15 |
17 |
18.7 |
21 |
22.5 |
25 |
26 |
28 |
30 |
33 |
0.125 |
0.15 |
0.18 |
0.215 |
Grade A not applicable to these dia’s |
|||||||||||||||||
0.2 |
0.24 |
0.29 |
0.35 |
0.42 |
0.5 |
||||||||||||||||
Across corners e Min Grade A
Min Grade B |
7.66 |
8.79 |
11.05 |
14.38 |
17.77 |
20.03 |
23.36 |
26.75 |
30.14 |
33.53 |
37.72 |
39.98 |
Grade A not applicable to these dia’s |
||||||||
7.5 |
8.63 |
10.89 |
14.2 |
17.59 |
19.85 |
22.78 |
26.17 |
29.56 |
32.95 |
37.29 |
39.55 |
45.2 |
50.85 |
55.37 |
60.79 |
66.44 |
71.3 |
76.95 |
82.6 |
88.25 |
|
Major Dia at thread (min) |
3.838 |
4.826 |
5.794 |
7.76 |
9.732 |
11.701 |
13.682 |
15.682 |
17.623 |
19.623 |
21.623 |
23.577 |
26.577 |
29.522 |
32.522 |
35.465 |
38.465 |
41.437 |
44.437 |
47.399 |
51.399 |
Major Dia at thread (max) |
3.978 |
4.976 |
5.974 |
7.972 |
9.968 |
11.966 |
13.962 |
15.962 |
17.958 |
19.958 |
21.958 |
23.952 |
26.952 |
29.947 |
32.947 |
35.94 |
38.94 |
41.937 |
44.937 |
47.929 |
51.929 |
ASTM A324 Grade 10.9 Bolts |
Grade 10.9 Automotive Bolts |
Grade 10.9 Coach Bolts Manufacturer |
Grade 10.9 Button Head Bolts Stokist |
ASTM A324 Grade 10.9 Toggle Bolts |
Grade 10.9 High Strength Bolts |
Grade 10.9 Fasteners & Bolts |
Grade 10.9 Deck Bolts |
Grade 10.9 Bolt |
Grade 10.9 Hurricane Bolts |
Grade 10.9 Allen Head Bolts Wholesaler |
Grade 10.9 Header Bolts Distributor |
Grade 10.9 Barrel Nuts |
Grade 10.9 Rivet Nuts |
Grade 10.9 Weld Nuts |
Grade 10.9 Wheel Nuts |
Grade 10.9 Flat Head Bolts |
Grade 10.9 Hurricane Bolts |
Grade 10.9 Gutter Bolts |
Grade 10.9 Hook Bolts Manufacturer |
Grade 10.9 Cap Head Bolts |
Grade 10.9 Exhaust Bolts Supplier |
- HT Studs uses in Petrochemicals
- Grade 10.9 Nuts uses in Specialty Chemicals
- Grade 10.9 Bolts And Nuts uses in Pharmaceuticals
- HT U Bolts uses in Spiral Welded tube for burner pipes and flues
- Grade 10.9 Fasteners uses in Gas Processing
- HT Fasteners uses in Power Generation
- Grade 10.9 Threaded Rod uses in Sea Water Equipment
- HT Bolts uses in Off-Shore Oil Drilling Companies
- HT Anchor Bolts uses in Heat Exchangers
- HT Fasteners uses in Pharmaceutical Equipment
- Grade 10.9 Steel Fasteners uses in Aircraft Exhaust Manifolds
View Class 10.9 Nuts Dimensions & weight, high tensile bolts grade 10.9 specifications.
Buy Grade 10.9 Steel Bolts,Grade 10.9 Fasteners from High Tensile Grade 10.9 Flange Bolts Exporter at factory price in India