Astm B564 Uns N06600 Inconel 600 Flanges Manufacturer India

Asme Sb 564 N06600 Slip On Flanges Suppliers And Check Nickel Alloy 600 Flanges Price List In India

View Alloy 600 Weld Neck Flange Dimensions And Alloy 600 Pipe Flange Weight Chart

The Asme B16.5 Inconel 600 Flange exhibits good resistance across a broad range of corrosive mediums. The chromium content in the Alloy 600 Flanges gives them better resistance as compared to both Alloy 200 as well as alloy 201 under oxidizing conditions. At the same time,  the high content of nickel in the alloy offers good resistance to reducing conditions as well.

Inconel 600 Flange Manufacturer
Inconel 600 Flange Manufacturer
Astm B564 Uns N06600 Flange
Astm B564 Uns N06600 Flange
Alloy 600 Flanges
Alloy 600 Flanges

Another important characteristic of the Nickel Chromium Alloy 600 Flange is its high or superior immunity to chlorine ion stress related corrosion cracking. Inconel 600 Threaded Flanges also demonstrates satisfactory resistance to organic acids such as formic acid, acetic acid and stearic acid.

The higher chromium content  in the alloy ensures resistance to corrosion against sulfur containing compounds. Addition of chromium by the Astm B564 Uns N06600 Flanges Manufacturer India  makes the alloy superior to commercially pure nickel under oxidative conditions. In strong oxidative solutions such as hot, concentrated nitric acid, B564 Uns N06600 Alloy 600 Wnrf Flange has poor resistance. Inconel 600 is fairly un-attacked by a majority of neutral solutions as well as alkaline salt solutions. Hence, these flanges produced from Inconel 600 can be used in some caustic environments. Inconel 600 flanges are known to resist steam, mixtures of steam, air and carbon dioxide. Due to its excellent resistance to high purity water, flanges made from Inconel  600 can be used in primary and secondary circuits of pressurized nuclear reactors.

In the presence of dry gases, such as chlorine or hydrogen chloride Little or no attack will occur on the Alloy 600 Forgings  at room and elevated temperatures. At temperatures that could rise up to 550C in these mediums, the N06600 Raised Face Weld Neck Flange Ansi B16.5  has been shown to be one of the most resistant out of the other conventional alloys. At elevated temperatures, an annealed and solution annealed treated Incoloy 600 Forged Flange will shows good resistance to scaling. One of the main characteristic of the Nickel 600 Spectacle Blind Flange is its high tensile strength. Inconel 600 is also known to resists ammonia bearing atmospheres, just as well as it tends to resist nitrogen atmospheres and carburizing gases. Under alternating oxidizing and reducing conditions Inconel 600 can suffer from selective oxidation. Inconel 600 Flanges contain elements such as nickel & chromium as  base in the alloy. The Alloy 600 Weld Neck Flange Dimensions have been designed to be used at a wide range of temperatures  from cryogenic to elevated temperatures up to a range of 2000 deg F .

Asme Sb 564 N06600 Slip On Flanges is nonmagnetic in nature and it has excellent mechanical properties. For instance, the mechanical properties of Alloy 600 flanges include a combination of high strength, good workability and good weldability. Inconel 600 displays cold forming characteristics, one which is normally accompanied with most chromium / nickel stainless steel grades. Typically, the Alloy 600 Pipe Flange Weight Chart can find use in many applications. For example, the Inconel 600 Orifice Flange is seen used in applications such as  perchlorethylene syntheses, vinyl chloride monomer (VCM), corrosion applications of the  include titanium dioxide production (chloride route) and magnesium chloride. Apart from these applications, Inconel 600 can also be used in industries such as heat treating, phenol condensers, soap manufacture, chemical and food processing, vegetable and fatty acid vessels and many more.

Manifold Pipe is the manufacturer and supplier of Inconel 600 flanges. Check out the Nickel Alloy 600 Flanges Price List.

 

Inconel 600 Flanges Specifications and Standards

Specifications Inconel 600 Flanges
Inconel 600 Flanges Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges.
ASME B16.5 Inconel 600 Flange size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Inconel 600 Flange Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
Inconel 600 Flange Standard ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Inconel 600 Flange Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
Inconel 600 Flange Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
Inconel 600 Flange Standard JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Main Types Forged / Threaded / Screwed / Plate
Flange supporting material Gasket, Ring Joint, Flange Bolts
Most common types of Inconel 600 Flanges
  • Socket Weld Ring Flange (SWRF), Inconel 600
  • Threaded Ring Flange, Inconel 600
  • Blind Ring Flange (BLRF), Inconel 600
  • Weld Neck Ring Flange (WNRF), Inconel 600
  • Slip-On Ring Flange (SORF), Inconel 600
  • Ring Type Joint Flange (RTJF), Inconel 600
  • Lap Joint Ring Flange (LJRF), Inconel 600
Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove
Inconel 600 Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production technique
  • Forged, Heat treated and machined
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Inconel 600 Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange

Specialized manufacturer of
  • DIN 2566 en 1092 1
  • Pn16 Flange
  • DIN 2566 pn16
  • Rtj Flange
  • Inconel 600 Sorf Flange
  • Inconel 600 Table Flanges
  • DIN 2566 pn10
  • Inconel 600 Large Diameter Flange
  • Inconel 600 Threaded Flanges
  • Inconel 600 Blind Flanges
  • ASTM B564 Plate Flange
  • Inconel 600 Weld Neck Flanges
  • Inconel 600 Loose Flanges
  • ASTM B564 Orifice Flange
  • Inconel 600 Slip-On Flanges
  • Alloy Lap Joint Flange
  • Inconel 600 Socketweld Flanges
  • Inconel 600 AS 4087 Water Flanges
Test Hydrostatic testing machine, Direct-reading Spectrograph,UI trasonic flaw detector, X-ray detector, Magnetic particle detector
Equipment Bending machine, Press machine, electric bevelling machine, Pushing Machine, Sand-blasting machine etc
Origin West Europe /Indian / USA / Japan / Korean
Inconel 600 Flanges Standard

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • AS 2129: Table D; Table E; Table H
  • B.S: BS4504 , BS3293, BS1560, BS10
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • American standard (ANSI)
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • British standard (BS)
  • German (DIN)
  • Any other specilised flanges
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
Key markets and industries for Inconel 600 Flanges
  • Nuclear power (mostly seamless).
  • Heavy oil refineries.
  • Bitumen upgraders.
  • Petrochemicals and acids.
Export to Indonesia, Ireland, Ukraine, Singapore,Saudi Arabia,Canada, Peru, Dubai, Brazil, Iran, Korea, USA, India, Egypt, Thailand, Spain, Oman etc
Inconel 600 Flanges Application
  • To Connect Pipe & Tubes in Power, Petroleum,Construction, Chemical, Gas, Shipbuilding,Metallurgy, etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

 

Inconel 600 Flange manufacturers in India

 

Inconel 600 Pipe Flange Pressure Ratings

Inconel 600 Flanges Flange Standards / Types and Pressure Class :

 

ASME/ANSI B 16.5 Slip on Flange, Welding Neck Flange, High Hub Blind Flange, Blind Flange,Lap Joint Flange, Socket Weld Flange, Ring Type Joint Flange, Threaded Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
ASME/ANSI B 16.47 Blind Flange [Series A & B], Welding Neck Flange
PRESSURE CLASS 75, 150, 300, 400, 600, 900
ASME/ANSI B 16.36 Slip on Flange, Welding Neck Flange, Threaded Flange
PRESSURE CLASS 300, 400, 600, 900, 1500, 2500
BS 4504 SEC 3.1 Hubbed Slip on Flange, Welding Neck Flange, Lapped Pipe End Flange, Hubbed Threaded Flange, Loose Plate Flange, Plate Flange, Blank Flange, Loose Plate With Weld Neck Flange
PRESSURE CLASS PN 2.5 TO PN 40
BS 4504[PART 1] Welding Neck Flange, Plate Flange, Hubbed Slip-On Hubbed Threaded,Blank Flange, Loose Plate With Weld On Plate Collar
PRESSURE CLASS PN 2.5 TO PN 400
BS 1560 BOSS Socket Welding Flange, Welding Neck Flange, Blind Flange, Slip-On Flange, Lapped Flange, Screwed Boss Flange
PRESSURE CLASS 150, 300, 400, 600, 900, 1500, 2500
BS10 Plate Slip-On Flange, Welding Neck Flange, Slip-On Boss Flange, Screwed Boss Flange, Blind Flange
TABLE D, E, F, H
DIN FLANGES DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673
PRESSURE CLASS PN 6 TO PN 100

 

View Inconel 600 Orifice Flange, Nickel 600 Spectacle Blind Flange, Incoloy 600 Forged Flange And N06600 Raised Face Weld Neck Flange Ansi B16.5 Class Price Ex Mumbai

Inconel 600 Flanges Price List

Inconel 600 Flanges
Price List
pn64 inconel 600 welding spade Blind Flange drawing
₹ 1,05,812.10-₹ 7,05,414.00 / Ton
class 600 stainless steel flange
₹ 4,701.59-₹ 4,889.93 / Piece
inconel 600 N06600 nickel alloy steel weld neck flange
₹ 176.36-₹ 246.90 / Kilogram
Customized precision Inconel 625 600 flange
₹ 1,234.48-₹ 1,410.83 / Piece
pn64 inconel 600 welding spade Blind Flange drawing
₹ 1,178.05-₹ 14,108.28 / Acre
Good Quality ANSI B16.5 Inconel Alloy 600 RTJ Flanges Price
₹ 141.09-₹ 2,116.25 / Piece
AISI Inconel 600 UNS N06600 Nickel Alloy Flange
₹ 7,054.14 / Piece
Inconel 600 Socket Weld Flanges
₹ 952.31-₹ 987.58 / Piece
ASTM AISI Inconel 600 Nickel Alloy Flange
₹ 7,054.14 / Piece
Inconel 600 Flat Face Flanges
₹ 1,481.37-₹ 1,763.54 / Piece

 

Dimensions of Inconel 600 Pipe Flange

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)
  • ASME B1.20.1, Pipe Threads, General Purpose
  • ASME B16.1, Cast Iron Flanges and Flanged Fittings Classes 25, 125 and 250
  • ASME B16.5, Pipe Flanges and Flanged Fittings NPS 1/2 Through NPS 24
  • ASME B16.11, Forged Fittings, Socket Welding and Threaded
  • ASME B16.25, Buttwelding Ends
  • ASME B16.36, Orifice Flanges
  • ASME B16.47, Large Diameter Steel Flanges NPS 26 Through NPS 60
  • ASME B31.1, Power Piping
  • ASME B31.3, Process Piping
  • ASME B46.1, Surface Texture (Surface Roughness, Waviness, and Lay)

 

Alloy 600 Flanges Weight Chart

15mm (1/2") Inconel 600 Flange Weight Chart

Standard
Class
Diameter
Bolt Circle Diameter
Number of Bolts
Bolt Size
Diameter of Bolt Hole
AS4087 Flanges
PN14 Flanges
95
67
4
M12
14
AS 2129 Flange
Table C Flanges
95
67
4
13
14
Table D Flanges
95
67
4
13
14
Table E Flanges
95
67
4
13
14
Table F Flanges
95
67
4
13
14
Table H Flanges
114
83
4
16
17
Table J Flanges
114
83
4
16
17
ANSI B16.5 Flanges
ANSI 150 Flanges
89
60
4
13
16
ANSI 300 Flanges
95
67
4
13
16
ANSI 600 Flanges
95
67
4
13
16
ANSI 900 Flanges
121
83
4
19
22
ANSI 1500 Flanges
121
83
4
19
22
ISO 7005 (DIN) Flange
PN6 Flanges
80
55
4
M10
11
PN10 Flanges
95
65
4
M12
14
PN16 Flanges
95
65
4
M12
14
PN20 Flanges
90
60.5
4
M14
16
PN25 Flanges
95
65
4
M12
14
PN40 Flanges
95
65
4
M12
14

 

Inconel 600 Flanges other types

ASTM B564 600 Backing Flanges
Inconel 600 Steel RTJ Flanges
ASTM B564 600 Plate Flanges
ASTM B564 600 RTJ Flanges
ASTM B564 600 Header Flanges
600 Inconel RTJ Flanges
ASTM B564 600 Exhaust Flanges
Alloy 600 Reducing Flanges
ASTM B564 600 Pipe Flanges
ASME SB564 600 Reducing Flanges
ASTM B564 600 Slip On Flanges
Inconel 600 Reducing Flange
ASTM B564 600 Socket Weld Flanges
Alloy 600 Raised Face Weld Neck Flanges
ASTM B564 600 Shower Rod Flanges
ASTM B564 600 Sae Flanges
Ansi 150 ASTM B564 600 Flanges
Inconel 600 Weld Neck Flange
ASTM B564 600 Screwed Flanges
ASTM B564 600 Clad Flanges
ASTM B564 600 Stub End Flanges
ASTM B564 600 Inconel 600 WNRF Flange
ASTM B564 600 Sbc Header Flanges
Alloy 600 Raised Face Blind Flanges
ASTM B564 600 Companion Flanges
ASME SB564 600 Blind Flanges
Custom ASTM B564 600 Flanges
Inconel 600 Blind Flange
ASTM B564 600 Square Flanges
ASTM B564 600 Ansi Flanges
ASTM B564 600 Tube Flanges
ASTM B564 600 Inconel 600 BLRF Flanges
ASTM B564 600 Blank Flanges
Alloy 600 Orifice Flanges
ASTM B564 600 Bsp Flanges
ASME SB564 600 Orifice Flanges
ASTM B564 600 Split Flanges
Inconel 600 Orifice Flanges
ASTM B564 600 Class 150 Flanges
ASTM B564 600 Duct Flanges
ASTM B564 600 Cover Flanges
B564 600 Inconel 600 Orifice Flanges
ASTM B564 600 Slip-On Pipe Flanges
Alloy 600 Socket weld Flanges
Class 600 ASTM B564 600 Flanges
ASME SB564 600 Socket weld Flanges
Gaskets For ASTM B564 600 Flanges
Alloy 600 Raised Face Slip On Flanges
ASTM B564 600 Handrail Flanges
ASME SB564 600 Slip On Plate Flanges
High Pressure ASTM B564 600 Flanges
Inconel 600 Slip On Flanges
ASTM B564 600 Lap Joint Flanges
B564 600 UNS S32750 Pipe Flanges
ASTM B564 600 Long Weld Neck Flanges
Alloy 600 Exhaust Flanges
ASTM B564 600 Metric Flanges
ASME SB564 600 Header Flanges
ASTM B564 600 Din Flanges
Inconel 600 Socket weld Flanges
Large Diameter ASTM B564 600 Flanges
ASTM B564 600 SWRF Flanges
Table E ASTM B564 600 Flanges
ASME B16.5 Inconel 600 Socket weld Flanges
ASTM B564 600 Floor Flanges
Alloy 600 Threaded Flanges
ASTM B564 600 Forged Flanges
ASME SB564 600 Threaded Flanges
ASTM B564 600 Pad Flanges
Inconel 600 RTJ Flanges
ASTM B564 600 Reducing Flanges
ASTM B564 600 Threaded Flanges
ASTM B564 600 Raised Face Flanges
Alloy 600 Long weld Neck Flanges
ASTM B564 600 Ring Flanges
ASME SB564 600 Long weld Neck Flanges
ASTM B564 600 Threaded Reducing Flanges
Inconel 600 Long weld Neck Flanges
ASTM B564 600 Wnrf Flanges
ASTM B564 600 Orifice Flanges
ASTM B564 600 Split Flanges
Alloy 600 Ring Type Joint Flanges
ASTM B564 600 Turbo Flanges
ASTM B564 600 Forged Flanges
ASTM B564 600 Vacuum Flanges
ASTM B564 600 Reducing Flange
ASTM B564 600 Reducing Flanges
Inconel 600 Forged Flange
ASTM B564 600 Puddle Flanges
ASME SB564 600 Ring Type Joint Flange
ASTM B564 600 Muffler Flanges
Inconel 600 Threaded Flanges
ASTM B564 600 Pump Flanges
ASTM B564 600 Manifold Flanges
ASTM B564 600 Pressed Flanges
ASTM B564 600 Threaded Flanges

 

Inconel 600 Flanges useful information

Click on below links for Alloy Flanges dimensions

 

Special offer on:

Flange Schedule/Class
Pipe Size - Pipe Flanges
Flange Connection Type
Flange Material
Max. Pressure
ASME B16.5 Class 150
1/2"
FNPT
Inconel 600
150 psi
ASME B16.5 Class 150
1/2"
Socket Weld
Forged Inconel 600
275 psi
ASME B16.5 Class 150
1/2"
Welded
Inconel 600
150 psi
ASME B16.5 Class 150
3/4"
FNPT
Inconel 600
150 psi
ASME B16.5 Class 150
3/4"
Socket Weld
Forged Inconel 600
275 psi
ASME B16.5 Class 150
1-1/4"
Socket Weld
Forged Inconel 600
275 psi
ASME B16.5 Class 150
1-1/2"
Socket Weld
Forged Inconel 600
275 psi
ASME B16.5 Class 150
2"
FNPT
Inconel 600
150 psi
ASME B16.5 Class 150
2"
Socket Weld
Forged Inconel 600
275 psi
ASME B16.5 Class 150
2-1/2"
Socket Weld
Forged Inconel 600
275 psi
ASME B16.5 Class 150
3"
Socket Weld
Forged Inconel 600
275 psi
ASME B16.5 Class 150
4"
FNPT
Inconel 600
150 psi
ASME B16.5 Class 150
4"
Socket Weld
Forged Inconel 600
275 psi
ASME B16.5 Class 300
1/2"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
1/2"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
1"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
1"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
1-1/4"
FNPT
Forged Inconel 600
720 psi
ASME B16.5 Class 300
1-1/4"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
1-1/2"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
1-1/2"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
2"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
2"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
2-1/2"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
2-1/2"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
3"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
3"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
4"
Slip On
Forged Inconel 600
720 psi
ASME B16.5 Class 300
4"
Slip On
Forged Inconel 600
720 psi

 

Alloy 600 Forged and Plate Flange

ASTM B564 Alloy 600 Slip-On Flange
ASTM B564 Alloy 600 Threaded Flange
ASTM B564 Alloy 600 Weld Neck Flange
ASTM B564 Alloy 600 Socket Weld Flange
ASTM B564 Alloy 600 Blind Flange
ASTM B564 Alloy 600 Reducing Flange
ASTM B564 Alloy 600 Lap Joint Flange
ASTM B564 Alloy 600 Plate Flange
ASTM B564 Alloy 600 Orifice Flange
ASTM B564 Alloy 600 Forged Flange
ASTM B564 Alloy 600 Ring Type Joint Flange
ASTM B564 Alloy 600 Square Flange

 

Inconel 600 Flanges Chemical Composition

Grade
C
Mn
Si
S
Cu
Fe
Ni
Cr
Inconel 600
0.15 max
1.00 max
0.50 max
0.015max
0.50 max
6.00 – 10.00
72.00 min
14.00 – 17.00

 

Inconel 600 Flanges mechanical properties

Element
Density
Melting Point
Tensile Strength
Yield Strength (0.2%Offset)
Elongation
Inconel 600
8.47 g/cm3
1413 °C (2580 °F)
Psi – 95,000 , MPa – 655
Psi – 45,000 , MPa – 310
40 %

 

Equivalent Grades for Inconel 600 Flanges

STANDARD
WERKSTOFF NR.
UNS
JIS
BS
GOST
AFNOR
EN
Inconel 600
2.4816
N06600
NCF 600
NA 13
МНЖМц 28-2,5-1,5
NC15FE11M
NiCr15Fe

 


Alloy 600 Forgings Specialist In India, Buy Inconel 600 Threaded Flanges And Nickel Chromium Alloy 600 Flange From Renowned Exporter Of Inconel 600 Flanges
High Pressure Alloy 600 Flanges Stockist In India And Get Asme B16.5 Inconel 600 Flange In Class 150,300 Lbs 2500 And Din Pn10 To Pn16