Stainless Steel Threaded Rod Manufacturers

Supplies a full range of 304 Stainless Steel Threaded Rod, 316 Stainless Steel Threaded Rod, A2-70 Threaded Rod at Factory price in India

carries a complete line of A2 Stainless Steel Threaded Rod, SS 304 Threaded Rod, 18-8 Stainless Steel Threaded Rod, M12 Stainless Steel Threaded Rod in mumbai, India

A threaded rod is a type of a fastening bar which is relatively long and threaded on both the ends of the rod. The  threading on the ss acme threaded rod may be extended up to the entire length of the rod. The is also known as a stud by ss threaded rod manufacturers.The ss316 threaded rod is designed to be used in tension. In a bar stock form, the m12 stainless steel threaded rod is often called an all-thread.

Stainless Steel Threaded Rod Manufacturers
Stainless Steel Threaded Rod Manufacturers
304 Stainless Steel Threaded Rod
304 Stainless Steel Threaded Rod
18-8 Stainless Steel Threaded Rod
18-8 Stainless Steel Threaded Rod
SS Threaded Rod
SS Threaded Rod

Generally produced from cold-rolled stainless steel grades, the ss 304 threaded rod is known to offer enhanced mechanical properties along with improved physical features. For example the 316 stainless steel threaded rod offers a higher degree of surface finish than machine-cut threads, uniform accuracy and increased strength. In addition to these properties the cost of this ss threaded rod is low.The m12 stainless steel threaded rod can be classified into 3 categories depending upon their application.

Fully Threaded Stud Bolts – The body of these threaded rods are fully covered by threads and hence are utilized for its engagement to the mating of nuts or similar fasteners.Tap End Stud Bolts – the extreme ends of the body of the Tap End Stud Bolts are threaded with an unequal thread engagement length.Double End Stud Bolts – These rods have equal thread length at both ends.

The 316 stainless steel threaded rod  can be used in combination with standard nuts and washers. The length of these threaded rods can be either cut as per standard stock lengths or cut  to the length as required by the customer . We are one of the leading distributors and stainless steel threaded rod manufacturers.

 

Stainless Steel Threaded Rods Specifications

Standards
Designation
Thread Requirements of Threaded Rod UNC & UNF, ASME B1.1, Class 2A (Fastenal will inspect and accept parts with a 1A no-go gauge)
SS Threaded Rod Manufacturing Process Cold Heading, Wire Drawing, Heat Treatment, Insert tapping, Inspection, Surface Plating, Packing
SS Threaded Rod Delivery time custom product will according to special requirement, Regular product is about 7-15 days
SS Threaded RodCoatings PTFE
SS Threaded Rod Head Square, Hex, Hex flange, Round, T-head, Flat & Triangular etc
Threaded Rod Neck type Square, Hex, Oval, Triangular & Knurled etc
SS Threaded Rod Dimensions
ASME B18.3, B18.2.1
Melt Origin
South America/East Europe/Japan/Korea
Threaded Rod Product Origin
Made in India
SS Threaded Rod Threads Configuration
B1.13M 6h Metric Coarse Threads and ASME B1.1 2A/3A Inch Unified Threads
SS Threaded Rod Certification
Dual Certified As per ASME & ASTM Codes
Threaded Rod Additional Certifications
Merkblatt AD 2000 W2 Certified, PED 97/23/EC Certified
Threaded Rod Mandatory Requirements
Free from Radioactive & Mercury Contamination
Additional Requirements
NACE MR0175 / MR0103 /ISO 15156 Compliance
SS Threaded Rod Samples Yes
Payment Terms Western Union, T/T, Paypal, Trade Assurance 30% deposit & balance before shipping or L/C

 

Threaded Rod DIN Standard B.S. DIN 933, DIN 931, DIN 934, DIN 912, DIN 603, DIN 6923, DIN 970, DIN 7981, DIN 7982, DIN916, DIN 913, DIN 7985
ISO – International Organization for Standardization ISO 4032, ISO 4033, ISO 4017, ISO7380 JIS standards
UTS – Unified Thread Standard UNC, UNF, UNEF, UNS, NPT, NPTF
Threaded Rod Grade 304 Stainless Steel Threaded Rod
SS 304 Threaded Rod
18-8 Stainless Steel Threaded Rod
A2 Stainless Steel Threaded Rod
Type 304 Stainless Steel Threaded Rod
DIN 939 Stud bolt
Stainless Steel Threaded Bars
A2 Stainless Steel Threaded Rod Class A2 70 Threaded Rod
A2-80 Threaded Rod
A2-50 Threaded Rod
British standards BS EN ISO 3506, DIN 976-1 A2 STAINLESS STEEL
Stainless Steel Threaded Rod Size
  • Cold Froging : M2-M24
  • Hot forging M24-M100, 1-1/2” Dia, up to 1100mm lg
  • Machining and CNC for Customized connecting element: up to M100 / 4” Dia, up to 1500mm lg

304 Stainless Steel Threaded Rod M2, M3, (M3.5), M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, M33, M36, M42, (M45), M48 to M160 and Custom Sizes

Threaded Rod Length 1000  mm
Diameter 2 mm-50  mm
Height 145  mm
Stainless Steel Threaded Rod Threads: METRIC, BSW, BSF, UNC, UNF or as required
Standard:

DIN, ISO, JIS, GB, IS, BS, ASTM and all International Standards
ANSI – American National Standards Institute

  • ANSI B 18.2.4 2M
  • ANSI B 28.2.4 1M
  • Stud Bolt length are defined in ASME B16.5 standard
  • Hex nuts are defined in ASME B18.2.2
  • ASME B18.5
  • GB/T5782, GB/T5783, GB5783
Threaded Rod Dimensions ASME B18.6.3 **Exception: screws 6 inches and shorter are fully threaded.
Tolerance +/-0.01mm to +/-0.05mm
Head drive: Phillips, Slotted, Phillips/Slot, Six-Lobe, etc
Threaded Rod Finishing: Zinc (yellow, white, blue, black), black oxide, 
Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated
Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET
Finish Per ASTM A380/A380M
Production process

Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing

Origin and service-region: European
Origin of 304 Stainless Steel Threaded Rod are Western European. However projects with eastern origin are possible on request.
Threaded Rod materials Surface Coating:
  • Hot Dipped Galvanizing Threaded Rod
  • Phosphate Threaded Rod
  • Teflon Threaded Rod
  • Ptfe Coated Threaded Rod
  • Xylon Threaded Rod
  • Zinc Phosphate Threaded Rod
  • Manganese Phosphate
  • Zinc Electro Plating (Hexavalent or Trivalent Chrome)
  • ZAC (Zinc Alluminium Flake Coating)
  • Cadmium Threaded Rod

All surface finishes can be supplied, including Zinc, Galvanised, Sherardized, Electroless Nickel, Dacromet, Geomet & PTFE.

Threaded Rod Surface treatment
  • Passivation
  • Polish
  • Anodizing
  • Sand blasting
  • Electroplating (color, blue, white, black zinc, Ni, Cr, tin, copper, silver)
  • Black oxide coating
  • Heat-disposing
  • Hot-dip galvanizing
  • Rust preventive oil
Top Manufacturers SPAX® Screws, GKW, Unbrako, Kundan, APL, Sundaram Precision, Infasco, EBY Fastener Etc.
304 Stainless Steel Threaded Rod Packing: IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request
Why choose us?
  • Best Price in India and compare to China
  • Professional technical team
  • High precision threads
  • Strong production line
  • Micro Metals will be your reliable partner
MOQ 5 pieces
Threaded Rod Test Certificate:
  • Manufacturer Test Certificate as per EN 10204 / 3.1,
  • Tensile testing to ISO 898-1
  • Nut proof load testing to ISO 898-2
  • Suitability for preloading to EN 14399-2
  • Suitability test for calibrated preload to EN 14399-10
  • Charpy Impact testing in accordance with ISO 148-1
  • Hardness testing to ISO 6508-1
  • Tri-Roll Thread Comparators
  • Calibrated gauges and tools
Threaded Rod Free Samples Yes
Delivery time Regular product is about 7-15 days, custom product will according to special requirement
Threaded Rod Payment Terms T/T, Paypal, Western Union, L/C or Trade Assurance 30% deposit & balance before shipping
Stainless Steel Threaded Rod dealers & distributors are located in

Pimpri-Chinchwad, New Delhi, Gurgaon, Melbourne, Thiruvananthapuram, Sydney, Noida, Baroda, Khobar, Calgary, Janeiro, Ahmedabad, Gujarat, Chennai, Ludhiana, Bangalore, India, Mumbai, Coimbatore, Tehran, Muscat, Surat, Bogota, , Ranchi, Montreal, Howrah, Santiago, Jamshedpur, Port-of-Spain, Ernakulam, Istanbul, Vadodara, Manama, Mexico Rajkot, Nagpur, Gimhae-si, Indore, Ankara, Hyderabad, Caracas, Ahvaz, Kanpur, Abu Dhabi, Karachi, Perth, Riyadh, Ludhiana, Lagos, Kolkata, Tau, London, Courbevoie, Dammam, Bengaluru, Kuwait

Threaded Rod Uses & application Railway, Wind tower, Secure suspended ceilings,Nuclear power, Automotive industry, Construction, Electronic industry

 

Strength Class
Min. UTS N/mm²
Min. Yield N/mm²
Elongation at Failure
A2 Stainless Steel Threaded Rod Class 50
500
210
0.6D
A2 Stainless Steel Threaded Rod Class 70
700
450
0.4D
A2 Stainless Steel Threaded Rod Class 80
800
600
0.3D

 

Threaded Rod Related ASTM Specifications

  • ASTM A193 / A193M – 16 : Specifications for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
  • ASTM A1082 / A1082M – 16 : Specifications for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
  • ASTM F2281 : Specifications for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications Designation
  • ASTM A1014 / A1014M – 16 : Specifications for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
  • ASTM A962 / A962M – 16a : Specifications for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
  • ASTM A638 / A638M : Specifications for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

 

Stainless Steel Threaded Rod Price in india

Stainless Steel Threaded Rod
Price in £
Package
M2 X 1000
£378.00
2
M2.5 X 1000
£363.00
2
M3 X 1000
£178.00
4
M4 X 1000
£182.00
3
M5 X 1000
£168.00
2
M6 X 1000
£213.00
2
M8 X 1000
£323.00
1
M10 X 1000
£508.00
1
M12 X 1000
£750.00
1
M14 X 1000
£1003.00
1
M16 X 1000
£1375.00
1
M18 X 1000
£1760.00
1
M20 X 1000
£2150.00
1
M22 X 1000
£2710.00
1

 

Fastener Thread Direction
Length
System of Measurement
Fastener Thread Type
Price
Right Hand
1 ft.
Inch
UNC (Coarse)
$2.12 / each
1 ft.
Inch
$2.66 / each
2 ft.
Inch
$4.12 / each
2 ft.
Inch
$5.36 / each
3 ft.
Inch
$5.98 / each
3 ft.
Inch
$7.78 / each
6 ft.
Inch
$11.77 / each
6 ft.
Inch
$14.83 / each
1 ft.
Inch
UNF (Fine)
$2.40 / each
1 ft.
Inch
$2.95 / each
2 ft.
Inch
$4.56 / each
2 ft.
Inch
$5.87 / each
3 ft.
Inch
$6.75 / each
3 ft.
Inch
$6.08 / each
6 ft.
Inch
$12.41/ each
 
6 ft.
Inch
$12.10 / each

 

Threaded Rod Size
Threaded Rod Pack Size
Threaded Rod Price
M 2 x 1m
1
£2.37 ex. VAT
M 2 x 1m Pack 5
5
£10.42 ex. VAT
M3 x 1m
1
£0.95 ex. VAT
M3 x 1m Pack 5
5
£3.83 ex. VAT
M4 x 1m
1
£1.05 ex. VAT
M4 x 1m Pack 5
5
£4.58 ex. VAT
M5 x 1m
1
£0.92 ex. VAT
M5 x 1m Pack 5
5
£3.83 ex. VAT
M6 x 1m
1
£0.97 ex. VAT
M6 x 1m Pack 5
5
£4.17 ex. VAT
M8 x 1m
1
£1.34 ex. VAT
M8 x 1m Pack 5
5
£6.17 ex. VAT
M10 x 1m
1
£2.25 ex. VAT
M10 x 1m Pack 5
5
£10.00 ex. VAT
M12 x 1m
1
£3.55 ex. VAT
M12 x 1m Pack 5
5
£16.67 ex. VAT
M16 x 1m
1
£5.90 ex. VAT
M16 x 1m Pack 5
5
£26.67 ex. VAT
M20 x 1m
1
£8.80 ex. VAT
M20 x 1m Pack 5
5
£38.75 ex. VAT
M24 x 1m
1
£13.50 ex. VAT
M30 x 1m
1
£21.08 ex. VAT
M33 x 1m
1
£30.40 ex. VAT
M36 x 1m
1
£37.45 ex. VAT
M42 x 1m
1
£52.07 ex. VAT
M45 x 1m
1
£82.87 ex. VAT
M48 x 1m
1
£102.17 ex. VAT

 

Unified Threaded Bars Specifications

Threaded Rod Size Range
.250" up to and including 15.00" Diameter
Stock Lengths
3 foot 
6 foot 
12 foot
Threaded Rod Special Order
Custom lengths up to 50 Ft. Full Thread, Double End and Single End Parts
Materials
Carbon Steels 
Alloy Steels 
Alloy Heat Treated Steels 
Stainless Steels
Aluminum 
Brass 
Titanium 
Exotic Metals
Threaded Rod Thread Profiles
UNC 
UNF 
UNEF
UNJ 
8 and 12 Pitch Series
Class Fit
1A 
2A
3A 
Modified
Threaded Rod Thread Direction
Right Hand 
Left Hand
Thread Start
Single 
Multiple


Types Of Stainless Steel Threaded Rod

Double Ended Threaded Studs Manufacturers in India
Double Ended Threaded Studs Manufacturers in India
Flush Head Studs Manufacturers India
Flush Head Studs Manufacturers India
Tie Rods Manufacturers in India
Tie Rods Manufacturers in India
Stainless Steel Threaded Weld Studs ISO 13918
Stainless Steel Threaded Weld Studs ISO 13918
Stainless Steel Double End Studs DIN 939
Stainless Steel Double End Studs DIN 939
Stainless Steel Left Hand Threaded Rod DIN 976-1
Stainless Steel Left Hand Threaded Rod DIN 976-1

 

India’s Largest Manufacturer of SS Threaded Rod, SS 304 Threaded Rod, SS 316 Threaded Rod in mumbai, India

Stainless Steel Threaded Rod Weight Chart

Threaded Rod Size
Threaded Rod Wt Per 100′
Threaded Rod Pieces Per Tube
1/4-20
12.3
50
5/16-18
20.1
35
3/8-16
29.6
25
7/16-14
40.6
17
1/2-13
53.9
12
9/16-12
67.6
10
5/8-11
85.2
8
3/4-10
124.9
5
7/8-9
172.4
4
1-8
225.6
2
1 1/8-7
284.2
1
1 1/8-8
290.9
1
1 1/4-7
357.6
1
1 1/4-8
365.8
1
1 1/2-6
517.8
1
1 1/2-8
539.7
1
1 3/4-5
703.0
1
2″-4 1/2
922.0
1

 

Left Hand Threaded Rods DIN 976-1

Threaded Rod Diameter (d)
Threaded Rod Pitch
Threaded Rod L
M3
0.50
1000
M4
0.70
1000
M5
0.80
1000
M6
1.00
1000
M7
1.00
1000
M8
1.25
1000
M10
1.50
1000
M12
1.75
1000
M14
2.00
1000
M16
2.00
1000
M18
2.50
1000
M20
2.50
1000
M22
2.50
1000
M24
3.00
1000

 

Stainless Steel Threaded Rods Dimensions

Threaded Rod Thread
Threaded Rod Weight per metre
Threaded Rod Strength
Threaded Rod Class 70
Threaded Rod Class 80
0.2% proof
UTS
0.2% proof
UTS
Kg/m
kN
kN
kN
kN
M12
0.72
41.0
64.0
54.0
73.0
M16
1.31
70.7
109.9
94.2
125.6
M20
2.05
110.3
171.5
147.0
196.0
M24
2.96
158.9
247.1
211.8
282.4
M27
3.83
206.6
321.3
275.4
367.2
M30
4.70
252.6
392.7
336.6
448.8
M33
5.78
312.3
485.8
416.4
555.2
M36
6.84
367.7
571.9
490.2
653.6
M39
8.14
439.2
683.2
585.6
780.8
M42
9.38
504.5
784.7
672.6
896.6
M45
10.90
587.7
914.2
783.6
1044.8
M48
12.32
662.9
1031.1
883.8
1178.4
M52
14.65
791.1
1230.6
1054.8
1406.4

 

Stainless Steel Threaded Rod Application

  •  Specialty Chemicals
  •  Heat Exchangers
  •  Gas Processing
  •  Petrochemicals
  •  Pharmaceuticals
  •  Power Generation
  •  Spiral Welded tube for burner pipes and flues
  •  Pharmaceutical Equipment
  •  Off-Shore Oil Drilling Companies
  •  Sea Water Equipment
  •  Aircraft Exhaust Manifolds

 

Stainless Steel Threaded Rod Stock

  •  SS 304 Threaded Rod
  •  317L Threaded Rod
  •  A4-80 Threaded Rod
  •  Stainless Steel 304 Threaded Rod
  •  A4-70 Threaded Rod
  •  316L SSThreaded Rod
  •  316 Stainless Steel Threaded Rod
  •  18-8 Threaded Rod
  •  ASTM A193 304 Steel Threaded Rod
  •  17-4 PH Threaded Rod
  •  AISI Stainless Steel Threaded Bar Stocks
  •  ASTM A276 AISI Stainless Steel Threaded Bars
  •  4.8 Threaded Rod
  •  A4 Threaded Rod
  •  18-8 Stainless Steel Threaded Rod
  •  A193 B8T (321) Threaded Rod
  •  SS 446 Hex Threaded Bar Manufacturer
  •  347 Threaded Rod
  •  Stainless Steel Threaded Bars
  •  310S Steel Square Threaded Bars Stockist
  •  A193 B6 (410) Threaded Rod
  •  304H Threaded Rod
  •  ASME SA 479 Stainless Cold Finish Threaded Bars
  •  Mild Steel Threaded Bar Exporter
  •  410 SS Threaded Rod
  •  SS 17-4PH Forged Threaded Bar Distributors
  •  A2 Threaded Rod
  •  Stainless Steel Threaded Bars
  •  304 Threaded Rod
  •  304L SS Threaded Rod
  •  310 Threaded Rod
  •  A193 B8C (347) Threaded Rod
  •  317 Threaded Rod
  •  904L Threaded Rod
  •  321 SS Threaded Rod
  •  Stainless Steel 420 Threaded Bar Stockholder
  •  A2-70 Threaded Rod
  •  316H Stainless Steel Threaded Rod
  •  316 Stainless Threaded Rod
  •  SS Threaded Bars
  •  UNS S30400 Threaded Rod
  •  304 SS Threaded Rod
  •  DIN 939 Stud
  •  SS 304 Hex Threaded Bar
  •  8.8 Threaded Rod
  •  WERKSTOFF NR. 1.4301 Threaded Rod
  •  DIN 939 Material
  •  Duplex 2205 Threaded Rod
  •  Stainless Steel 316 Round Threaded Bars Manufacturer
  •  ASTM A276 Steel 316H Bright Threaded Bars
  •  SS 422 Rectangular Threaded Bar Exporter
  •  SS 904L DIN 1.4539 Square Threaded Bars

 


View Grade B8 18-8 Stainless Steel Threaded Rod Dimensions & weight, A2-70 Threaded Rod specifications.
Buy SS Acme Threaded Rod, 304 Stainless Steel Metric Threaded Rod from SS Threaded Rod Manufacturers at factory price in India