ASTM A276 UNS S32750 Round Bar

UNS S32750 F53 Round Bar, ASTM A276 UNS S32750 Forged Bar, Super Duplex Stainless Steel F53 Hex Bar suppliers UAE (Dubai)

Duplex UNS S32750 Hexagon Bar Exporter, Super Duplex F53 Flat Bar, UNS S32750 F53 Square Bar manufacturers in India

The UNS S32750 F53 Round Bars are manufactured from Super duplex grade stainless steel 2705. Due to duality in the microstructure of 2705 grade stainless steel, they fall under the duplex category of stainless steel. The mixed microstructure of UNS S32750 F53 Round Bars is due to the presence of both ferrite and austenite in an equal 50% proportion. As compared to both ferritic and austenitic steel grades, the UNS S32750 Round Bar has an increased tensile strength.

Super Duplex Stainless Steel F53 Flat Bar
Super Duplex Stainless Steel F53 Flat Bar
UNS S32750 F53 Round Bar
UNS S32750 F53 Round Bar
ASTM A276 UNS S32750 Square Bar
ASTM A276 UNS S32750 Square Bar

Table of Content

The increased strength of the UNS S32750 alloy is also due to the higher content of both molybdenum and chromium, which gives the material greater corrosion resistance as opposed to standard duplex  stainless steel grades.The balanced dual microstructure phase combines high strength with cost effective corrosion resistance particularly in high chloride environments.

Super Duplex offers the same benefits as its counterpart, i.e. –  lower alloying costs when compared individually with both similar ferritic as well as austenitic grades.  due to its high tensile strength the wall size of the ASTM A276 S32750 Hex Bar can be reduce with out compromising on both the quality as well as the strength of the material.

Generally, the ASTM A276 UNS S32750 Forged Bar is available in a solution annealed condition. In an annealed condition the yield strength of this alloy is about 550Mpa, which is greater than most grades of austenitic and duplex stainless steel .Another important feature of the ASTM A479 S32750 Bar is its higher PREN number. By the addition of a higher content of metals like chromium, molybdenum and nitrogen results in a Pitting Resistance Equivalent number (PREN) of greater than 41. Thus, the provided pitting and crevice corrosion resistance of the A276 S32750 Flat Bar is superior to austenitic and duplex stainless steels across a wide spectrum of corrosive media, and a Critical Pitting Temperature that exceeds 50°C.

Although this alloy cannot be hardened by heat treatment, it can be strengthened by cold working the bars. The A479 S32750 Rod also exhibits a low coefficient of thermal expansion. Further, the  heat conductivity of the ASTM A276 UNS S32750 Forged Bar is higher than austenitic steels. Thus, this alloy is well suited for applications where the temperatures can rise up to 300°C.

 

UNS S32750 F53 Round Bars Specification
CE8MN; 2A
  • Cast UNS: J93345
  • Cast Grade: CE8MN; 2A
  • Cast ASTM: A890, A995 (CENT, INVEST, SAND)
  • Wrought UNS: S32750
  • Wrought Grade: ESCOLOY 45D®
CE3MN; 5A
  • Cast UNS: J93404
  • Cast Grade: CE3MN; 5A
  • Cast ASTM: A890, A995 (CENT, INVEST, SAND)
  • Wrought UNS: S32750
  • Wrought Grade: 2507
  • CE3MN; 5A
Standard EN, DIN, JIS, BS, AISI, API, ASTM, ASME Round Bars
Specification ASTM A276, A479 / ASME SA276, SA479
ASTM A276 UNS S32750 Round bars special price for Dubai, UAE, Singapore & Malaysia clients.
ASTM A276 UNS S32750 Round bars size Diameter: 3mm - 450mm DIA
Length 3 to 6 meter, Custom Cut Lengths
ASTM A276 UNS S32750 Angle bar size 3mm* 20mm* 20mm~12mm* 100mm* 100mm
ASTM A276 UNS S32750 Square bar size 4mm*4mm~100mm*100mm
ASTM A276 UNS S32750 Flat bar size Thickness: 2mm~100mm
Width: 10mm~500mm
ASTM A276 UNS S32750 Hex Bar size 2mm~100mm
Surface
  • Hot Rolled Pickled or Sand Blasting Finished
  • Bright
  • Rough machined (RM)
  • Peel turned and burnished (PTB)
  • Peel turned (PT)
  • Hairline
  • Polished
  • Cold Drawn
ASTM A276 UNS S32750 Round Bar Standard Dimensions Diameter / Height:
ASTM A276 UNS S32750 Billet Size 1/2" to 495mm Diameter
ASTM A276 UNS S32750 Rectangles Size 33mm x 30mm to 295mm x 1066mm
Finish Bright Polished, Black, Polish, Rough Turned, Grinding, Centreless Ground, NO.4 Finish, Matt Finish & BA Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Condition Annealed round bar, Cold Drawnd Pulished Cold Drawn Centreless Ground & Polished, Sheared & Edged, Rolled Flat
Technique ASTM A276 UNS S32750 Cold Rolled, Hot Rolled,Forged Round Bar, Cold Drawn, Rod
Form Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc.
Manufacturing Process
  • Straightness upto 0.5mm/ mtr to 1mm /mtr. 240,400,600 Grit Belt Pol
  • Peeled Bars: Dia. Ø15 mm -120 mm. Peeled, Straightened, Centreless Ground & Polished.
  • Cold Drawn Bright Bar: Dia. 2.5 mm to 14 mm. Annealed, Pickled, Cold Drawn, Centreless Ground & Polished.
  • Surface finish 0.5 µmm to 1.5µmm max>
Heat Treatment
  • Solution Annealing, Soft Annealing, Hardening & Tempering & Normalizing, Oil & Water Quenching,
Quality & Inspection
  • All required Mechanical and metallurgical tests are carried out at our works.
  • We issue EN10204/3.1 Certificate as per ADW0
  • Each Bar is tested for size tolerance,Ovality,length and Roughness.
  • Free from any internal defects
  • Each lot is tested and ensured that material is free from Radio active contamination.
  • Container is fumigated before stuffing. All wooden box /blockes are also fumigated.
  • Bundles are made of 500/1000kgs each packed in HDPE sheets.
Features
  • Durable
  • Chemical resistance
  • High strength
  • Corrosion resistance
  • Dimensional accuracy
Tolerances according to EN 10278 - ISO 286-2
Certificates EN 10204 / 3.1
Our ASTM A276 UNS S32750 round bar conforms to NACE MR0175/ISO 15156

 

A479 Uns S32750 Bright Bar Condition
H&T
Hardened and tempered.
ANN
Annealed
PH
Precipitation hardened.

 

Duplex Steel UNS S32750 Square Bar Surface finish
CD
Cold drawn
P
Polished
BD
Bright drawn
SRE
Slit rolled edge
CG
Centreless ground
HF
Hot finished
CF
Cold finished
HRAP
Hot rolled annealed and pickled
P&T
Peeled and turned
RT
Rough turned/peeled
ST
Smooth turned
PR
Peeled and reeled

 

UNS S32750 F53 Round bar standards
Grade
EN 10088-3
EN 10272
AD2000-
W2/W10
ASTM A 479
ASME SA 479
NACE MR 0175
UNS S32750 F53 Round Bar
20-450 mm
20-160 mm
-
20-450 mm
20-450 mm
Independent of size

Type
SIZES (mm)
SIZES (Inches)
ISO Tolerance
Cold Drawn and Polished UNS S32750 F53 Bar
3.00 - 75.00
1/8" - 3.00"
h8-h9-h10-h11
UNS S32750 F53 Cold Drawn and Ground Bar
10.00 - 75.00
5/6" - 2.50"
h8-h9-h10-h11
UNS S32750 F53 Peeled and Polished Round Bar
40.00 - 150.00
1.50" - 6.00"
h11, h11-DIN 1013
UNS S32750 F53 Peeled and Ground Bar
20.00 - 50.00
3/4″ - 2.00"
h9-h10-h11

 

Uns S32750 Bar Suppliers
UNS S32750 Rod
UNS S32750 Rod
UNS S32750 F53 Rectangular Bar
UNS S32750 F53 Rectangular Bar
UNS S32750 Flat Bar
UNS S32750 Flat Bar
UNS S32750 Square Bar
UNS S32750 Square Bar
UNS S32750 F53 Precision Ground Bar
UNS S32750 F53 Precision Ground Bar
UNS S32750 F53 Precision Ground Stock
UNS S32750 F53 Precision Ground Stock
UNS S32750 F53 Triangle Bar
UNS S32750 F53 Triangle Bar
UNS S32750 Hex Bar
UNS S32750 Hex Bar
UNS S32750 F53 Rounds
UNS S32750 F53 Rounds
UNS S32750 F53 T-Bar
UNS S32750 F53 T-Bar
UNS S32750 F53 Half-Round Bar
UNS S32750 F53 Half-Round Bar
UNS S32750 Round Bar
UNS S32750 Round Bar
UNS S32750 F53 Hexagonal Bar
UNS S32750 F53 Hexagonal Bar
UNS S32750 Threaded Bar
UNS S32750 Threaded Bar
UNS S32750 F53 Rebar
UNS S32750 F53 Rebar
UNS S32750 F53 Hollow Bar
UNS S32750 F53 Hollow Bar

 

Super Duplex F53 Round Rod stockist, ASTM A276 UNS S32750 Hex Bar exporter in India, UNS S32750 Round Bar suppliers in Dubai, UAE .Manufacturer & Supplier of Super Duplex Stainless Steel F53 Round Bar in India,

 

F53 Round Bar Price

UNS S32750 Round Bar Price

Duplex Steel UNS S32750 Round Bar
Duplex Steel UNS S32750 Round Bar Price
ASTM UNS S31803 Duplex Stainless Steel Round Bar ₹ 1,80,574.50-₹ 2,16,689.40 / Ton
S32750 Duplex Steel round UNS SS Bright WERKSTOFF NR. 1.4462 Square Bar ₹ 191.41 / Kilogram
8mm diameter duplex stainless steel round bar 2205 UNS S32750 ₹ 108.35-₹ 361.15 / Kilogram
AISI ASTM Duplex Steel F53 Round Bar ASTM A182 UNS ₹ 2,52,804.30-₹ 4,33,378.80 / Ton
UNS S32750 Duplex Stainless Steel Round Bar ₹ 1,08,344.70-₹ 1,44,459.60 / Ton
astm a182 F53 duplex stainless uns S32750 round bar bars rod rods 1 Piece Min. Order
UNS S32750 F53 Forged Round ₹ 2,52,804.30-₹ 4,33,378.80 / Ton
Duplex Steel UNS S32750 Forged Round Bars Suppliers ₹ 1,083.45-₹ 3,611.49 / Kilogram
S32750 Cold Drawn Bars Exporter ₹ 2,52,804.30-₹ 4,33,378.80 / Ton

*Approx price, please contact for final price.

 

F53 Duplex Steel Flat Bar Size
Duplex Steel UNS S32750 flat bar sizes in mm
Duplex Steel UNS S32750 Flat Bar Size (inch)
Duplex Steel UNS S32750 Flat Bar Thickness (mm)
Duplex Steel UNS S32750 Flat Bar Thickness (in Inches)
22
7/8
17 & 18
2/3 - 5/7
25
1
5 to 20
3/16 - 4/5
30
1-3/16
5 to 20
3/16 - 4/5
32
1-1/4
6 to 20
1/4 - 4/5
35
1-3/8
5 to 20
3/16 - 3/16
40
1-4/7
5 to 25
3/16 - 1
45
1-7/9
5 to 25
3/16 - 1
47
1-6/7
17,25 & 32
2/3, 1 & 1-1/4
50
2
5 to 32
3/16 - 1-1/4
55
2-1/16
5 to 25
3/16 - 1
57
2-1/4
32
1-1/4
60
2-3/8
5 to 35
3/16 - 1-3/8
63
2-1/2
10 to 30
3/8 - 1-3/16
65
2-5/9
10 to 30 & 35
3/8 - 1-3/16, & 1-3/8
70
2-3/4
6 to 25 & 40
1/4 - 1, & 1-4/7
75
3
8 to 25
5/16 - 1
80
3-1/8
8 to 20
5/16 - 4/5
90
3-1/2
8 to 20
5/16- 4/5
100
4
8, 10, 12
5/16, 3/8, 1/2

 

Duplex Stainless Steel S32750 Hex Bar Sizes

Duplex UNS S32750 Hexagon Bars sizes

Size (mm)
Weight (kg/m)
Size (mm)
Weight (kg/m)
Size (mm)
Weight (kg/m)
7 x 7
0.337
19 x 19
2.479
38 x 38
9.916
8 x 8
0.44
20 x 20
2.747
40 x 40
10.988
9 x 9
0.556
21 x 21
3.029
42 x 42
12.114
10 x 10
0.687
22 x 22
3.324
45 x 45
13.906
11 x 11
0.831
24 x 24
3.956
48 x 48
15.822
12 x 12
0.989
25 x 25
4.292
50 x 50
17.168
13 x 13
1.161
26 x 26
4.642
53 x 53
19.29
14 x 14
1.346
28 x 28
5.384
55 x 55
20.774
15 x 15
1.545
30 x 30
6.181
60 x 60
24.723
16 x 16
1.758
32 x 32
7.032
65 x 65
29.015
17 x 17
1.985
34 x 34
7.939
70 x 70
33.65
18 x 18
2.225
36 x 36
8.9
75 x 75
38.629

 

Stainless Steel S32750 Hot rolled square bar Sizes
Size (mm)
Weight per metre (Kg)
Size (mm)
Weight per metre (Kg)
12 x 12
1.14
30x30
7.11
16 x 16
2.02
40 x 40
12.60
20 x 20
3.16
50 x 50
19.80
25 x 25
4.94

 

Stainless UNS S32750 Hollow Bar Sizes

OD = outside diameter, ID = inside diameter

Size
Chucked true to OD
Chucked true to ID
OD,
mm
ID,
mm
Max. OD,
mm
Min. ID,
mm
Max. OD,
in.
Min. ID,
in.
Max. OD,
mm
Min. ID,
mm
Max. OD,
in.
Min. ID,
in.
32
20
31
21.9
1.220
0.862
30
21
1.185
0.827
32
16
31
18
1.220
0.709
30
17
1.181
0.669
36
25
35
26.9
1.378
1.059
34.1
26
1.343
1.024
36
20
35
22
1.378
0.866
34
21
1.339
0.827
36
16
35
18.1
1.378
0.713
33.9
17
1.335
0.669
40
28
39
29.9
1.535
1.177
38.1
29
1.500
1.142
40
25
39
27
1.535
1.063
38
26
1.496
1.024
40
20
39
22.1
1.535
0.870
37.9
21
1.492
0.827
45
32
44
33.9
1.732
1.335
43.1
33
1.697
1.299
45
28
44
30
1.732
1.181
43
29
1.693
1.142
45
20
44
22.2
1.732
0.874
42.8
21
1.685
0.827
50
36
49
38
1.929
1.496
48
37
1.890
1.457
50
32
49
34.1
1.929
1.343
47.9
33
1.886
1.299
50
25
49
27.2
1.929
1.071
47.8
26
1.882
1.024
56
40
55
42
2.165
1.654
54
41
2.126
1.614
56
36
55
38.1
2.165
1.500
53.9
37
2.122
1.457
56
28
55
30.3
2.165
1.193
53.7
29
2.114
1.142
63
50
62
51.9
2.441
2.043
61.1
51
2.406
2.008
63
45
62
47
2.441
1.850
61
46
2.402
1.811
63
40
62
42.2
2.441
1.661
60.8
41
2.394
1.614
63
36
62
38.3
2.441
1.508
60.7
37
2.390
1.457
63
32
62
34.4
2.441
1.354
60.6
33
2.386
1.299
71
56
69.9
58
2.752
2.283
68.9
57
2.713
2.244
71
45
69.9
47.3
2.752
1.862
68.6
46
2.701
1.811
71
40
69.9
42.4
2.752
1.669
68.5
41
2.697
1.614
71
36
69.9
38.5
2.752
1.516
68.4
37
2.693
1.457
75
60
73.8
62
2.906
2.441
72.8
61
2.866
2.402
75
50
73.8
52.2
2.906
2.055
72.6
51
2.858
2.008
75
40
73.8
42.5
2.906
1.673
72.3
41
2.846
1.614
80
63
78.8
65
3.102
2.559
77.8
64
3.063
2.520
80
50
78.8
52.4
3.102
2.053
77.4
51
3.047
2.008
80
45
78.8
47.5
3.102
1.870
77.3
46
3.043
1.811
80
40
78.8
42.6
3.102
1.677
77.2
41
3.039
1.614
85
67
83.7
69.1
3.295
2.720
82.6
68
3.252
2.677
85
55
83.7
57.4
3.295
2.260
82.3
56.0
3.240
2.205
85
45
83.7
47.6
3.295
1.874
82.1
46.0
3.232
1.811
90
71
88.6
73.1
3.488
2.878
87.6
72.1
3.449
2.839
90
63
88.6
65.3
3.488
2.571
87.3
64.0
3.437
2.520
90
56
88.6
58.5
3.488
2.303
87.1
57.0
3.429
2.244
90
50
88.6
52.6
3.488
2.071
87.0
51.0
3.425
2.008
95
75
93.5
77.3
3.681
3.041
92.4
76.2
3.641
2.997
95
67
93.5
69.3
3.681
2.728
92.2
68.0
3.630
2.677
95
50
93.5
52.7
3.681
2.075
91.8
51.0
3.614
2.008
100
80
98.5
82.3
3.878
3.240
97.4
81.2
3.835
3.197
100
71
98.5
73.4
3.878
2.890
97.2
72.1
3.827
2.839
100
63
98.5
65.5
3.878
2.579
97.0
64.0
3.819
2.520
100
56
98.5
58.7
3.878
2.311
96.8
57.0
3.811
2.244
106
80
104.4
82.5
4.110
3.248
103.1
81.2
4.059
3.197
106
71
104.4
73.5
4.110
2.894
103.0
72.1
4.055
2.839
106
63
104.4
65.7
4.110
2.587
102.7
64.0
4.043
2.520
106
56
104.4
58.9
4.110
2.319
102.5
57.0
4.035
2.244
112
90
110.3
92.5
4.343
3.642
109.2
91.4
4.299
3.598
112
80
110.3
82.6
4.343
3.252
108.9
81.2
4.287
3.197
112
71
110.3
73.7
4.343
2.902
108.7
72.1
4.280
2.839
112
63
110.3
65.8
4.343
2.591
108.5
64.0
4.272
2.520
118
90
116.2
92.7
4.575
3.650
114.9
91.4
4.524
3.598
118
80
116.2
82.8
4.575
3.260
114.6
81.2
4.512
3.197
118
71
116.2
73.8
4.575
2.906
114.5
72.1
4.508
2.839
118
63
116.2
66.0
4.575
2.598
114.2
64.0
4.496
2.520
125
100
123.1
102.7
4.846
4.043
121.9
101.5
4.799
3.996
125
90
123.1
92.8
4.846
3.654
121.7
91.4
4.791
3.598
125
80
123.1
82.9
4.846
3.264
121.4
81.2
4.780
3.197
125
71
123.1
74.0
4.846
2.913
121.3
72.1
4.772
2.839
132
106
130.0
108.8
5.118
4.283
128.8
107.6
5.071
4.236
132
90
130.0
93.0
5.118
3.661
128.4
91.4
5.055
3.598
132
80
130.0
83.1
5.118
3.272
128.1
81.2
5.043
3.197
132
71
130.0
74.2
5.118
2.921
121.2
72.1
5.035
2.839
140
112
137.9
115
5.429
4.528
136.6
113.7
5.378
4.476
140
100
137.9
103.1
5.429
4.059
136.3
101.5
5.366
3.996
140
90
137.9
93.2
5.429
3.669
136.1
91.4
5.358
3.598
140
80
137.9
83.3
5.429
3.280
135.8
81.2
5.346
3.197
150
125
147.7
128.1
5.815
5.043
146.5
126.9
5.768
4.996
150
106
147.7
109.3
5.815
4.303
146
107.6
5.748
4.236
150
95
147.7
98.4
5.815
3.874
145.7
96.4
5.736
3.795
150
80
147.7
83.6
5.815
3.291
145.3
81.2
5.720
3.197
160
132
157.6
135.3
6.205
5.327
156.3
134
6.154
5.276
160
122
157.6
125.4
6.205
4.937
156
123.8
6.142
4.874
160
112
157.6
115.5
6.205
4.547
155.8
113.7
6.134
4.476
160
90
157.6
94.0
6.205
3.701
155.2
91.4
6.110
3.598
170
140
167.4
143.5
6.591
5.650
166
142.1
6.535
5.594
170
130
167.4
133.6
6.591
5.260
165.8
132
6.528
5.197
170
128
167.4
131.6
6.591
5.181
165.7
130
6.524
5.118
170
118
167.4
121.7
6.591
4.791
165.5
119.8
6.516
4.717
170
106
167.4
109.8
6.591
4.323
165.2
107.6
6.504
4.236
170
100
167.4
103.9
6.591
4.091
165
101.5
6.496
3.996
180
150
177.3
153.6
6.980
6.047
176
152.3
6.929
5.996
180
140
177.3
143.7
6.980
5.657
175.7
142.1
6.917
5.594
180
125
177.3
128.9
6.980
5.075
175.3
126.9
6.902
4.996
180
100
177.3
104.1
6.980
4.098
174.7
101.5
6.878
3.996
190
160
187.1
163.8
7.366
6.449
185.7
162.4
7.311
6.394
190
150
187.1
153.9
7.366
6.059
185.5
152.3
7.303
5.996
190
132
187.1
136
7.366
5.354
185.1
134
7.287
5.276
200
170
197.0
173.9
7.756
6.846
195.6
172.6
7.701
6.795
200
160
197.0
164
7.756
6.457
195.4
162.4
7.693
6.394
200
150
197.0
154.1
7.756
6.067
195.2
152.3
7.685
5.996
200
140
197.0
144.2
7.756
5.677
194.9
142.1
7.673
5.594
212
170
208.8
174.2
8.220
6.858
207.2
172.6
8.157
6.795
212
150
208.8
154.4
8.220
6.079
206.6
152.3
8.133
5.997
212
130
208.8
134.6
8.220
5.299
206.2
132
8.118
5.197
224
180
220.6
184.4
8.685
7.260
218.9
182.7
8.618
7.193
224
140
220.6
144.8
8.685
5.701
217.9
142.1
8.579
5.594
236
190
232.4
194.6
9.150
7.661
230.7
192.9
9.083
7.594
236
150
232.4
155.0
9.150
6.102
229.7
152.3
9.043
5.996
250
200
246.2
204.9
9.693
8.067
244.3
203.0
9.618
7.992
275
200
268.9
205.4
10.587
8.087
266.5
203.0
10.492
7.992

 

UNS S32750 F53 Round Bar Sizes

Bar sizes of UNS S32750 F53 can also be selected when using the THD model.

ASTM A276 UNS S32750 Round Bar Size Dimensions
Metric
US Bar
ASTM/ Canadian
Japanese
Bar Size
Diam. (mm)
Bar Size
Diam. (Inch)
Bar Size
Diam. (mm2)
Bar Size
Diam. (mm)
5
5
#2
0.250
10M
100
6
6
5.5
5.5
#3
0.375
15M
200
10
10
6
6
#4
0.500
20M
300
13
13
7
7
#5
0.625
25M
500
16
16
8
8
#6
0.750
30M
700
19
19
9
9
#7
0.875
35M
1000
22
22
10
10
#8
1.000
45M
1500
25
25
11
11
#9
1.125
55M
2500
29
29
12
12
#10
1.250
32
32
14
14
#11
1.375
35
35
16
16
#12
1.500
38
38
18
18
#13
1.625
41
41
20
20
#14
1.750
44
44
22
22
#15
1.875
48
48
25
25
#16
2.000
51
51
28
28
#18
2.250
57
57
32
32
36
36
40
40
44
44
50
50

 

ASTM A276 UNS S32750 Stainless Steel Bar Stock
ASTM A276 S32750 Precision Ground Stock
Duplex UNS S32750 Super Duplex Triangle bar
S32750 Grade Duplex Round Bar
1.4410 Werkstoff S32750 Super Duplex Hexagonal Bar
Duplex ASTM A479 S32750 Threaded Bar
Super Duplex ASTM A276 S32750 Rebar
ASTM A276 UNS S32750 Duplex Hollow Bar
ASTM A479 S32750 Precision Ground Bar
ASTM A276 S32750 Duplex Square Bar
ASTM A479 S32750 Super Duplex Half-Round Bar
ASTM A276 S32750 Duplex Hexagon Bar
ASTM A276 S32750 Duplex Forged Bar
ASTM A276 UNS S32750 Duplex T-Bar
Super Duplex ASTM A276 UNS S32750 Rounds
Duplex ASTM A479 S32750 Rectangular Bar
Duplex UNS S32750 Flat Bar
Duplex SA 479 S32750 Rods
1.4410 Werkstoff S32750 Duplex Hex Bar
ASTM A276 UNS S32750 Duplex Round Bar
Saf 2507 UNS S32750 Duplex Round Rod
ASTM A276 S32750 Duplex Bright Bar
ASTM A276 S32750 Duplex Black Bar
Super Duplex ASTM A276 S32750 Cold Drawn Bar
Cold Rolled S32750 Duplex Stainless Steel Round Hot Forged Bar
S32750 Duplex Stainless Steel Billets Bar
Duplex ASTM A276 S32750 Ingot
ASTM A276 UNS S32750 Spring Steel Bar
Saf 2507 UNS S32750 Duplex Forged Round Bar
ASTM A276 S32750 Super Duplex RCS Bar
Hot Rolled UNS S32750 F55 round Bar
Duplex Saf 2507 UNS S32750 Threaded Bar
ASTM A276 UNS S32750 Cold Drawn & Polished Square Bar
S32750 Duplex Stainless Steel Black Surface Round Bar
ASTM A276 UNS S32750 Duplex Round Bar For Shaft
ASTM A276 UNS S32750 Round Hot Forged Bar
ASTM A276 S32750 Duplex Polish Bar
1.4410 Werkstoff S32750 Super Duplex Polished Round Bar
Bright UNS S32750 F55 Duplex Hollow Bar
Super Duplex Half UNS S32750 F55 round bar
Bright Black surface Super Duplex F53 round bar
Large Diameter Super Duplex F53 Round Bar
ASTM A276 UNS S32750 flat bright round bar
Solid Round 20mm UNS S32750 F55 Bar
Cold drawn Duplex S32750 Grade round bar

 

UNS S32750 Round Bar Stock range

Super Duplex 1.4410 - UNS S32750 - F53 Round bar hotrolled / forged, peeled / turned acc. DIN EN 10060 ( formerly DIN 1013), long 4-6 mtr

ASTM A479 S32750 Bars Sizes:

Ø sizes in mm
15,88
38,10
70,00
110,00
150,00
190,50
279,40
20,00
40,00
75,00
114,30
152,40
200,00
292,10
22,22
42,00
76,20
120,00
158,75
203,20
304,80
25,00
44,45
80,00
120,65
160,00
215,90
324,00
25,40
50,00
82,55
125,00
165,10
220,00
325,00
28,57
50,80
88,90
127,00
170,00
225,00
330,20
30,00
57,15
95,25
130,00
177,80
228,60
355,60
31,75
60,00
100,00
133,35
180,00
241,30
381,00
34,92
63,50
101,60
139,70
184,15
250,00
405,00
35,00
69,85
107,95
140,00
190,00
254,00
406,40

 

Uns S32750 F53 Round Bar Chemical Composition
Element
S32750
C
0.030
Si
0.80
Mn
1.20
P
0.035
S
0.020
Cr
24.0/26.0
Mo
3.0/5.0
Ni
6.00/8.00
N
0.24/0.32
Other
Cu:0.50

 

Uns S32750 Round Bar Mechanical Properties
Element
S32750
Tensile Strength(MPa)
795
Proof Stress 0.2% (MPa)
550
Elongation A5(%)
15
Hardness Max (HB-HRB)
310-32*

 

UNS S32750 F53 Round Bars Equivalent Grades
1.4410 / S32750 / F53 / X2CRNIMON25-7-4
STANDARD WERKSTOFF NR. UNS
Super Duplex F531.4410S32750

 

S32750 Duplex Stainless Steel Round Bars Stock
UNS S32750 F53 Bar UNS S32750 F53 Billets UNS S32750 F53 Blooms UNS S32750 F53 Rods
ASTM A276 UNS S32750 Super Duplex Hot Rolled Bar Duplex UNS S32750 Hot Rolled Billets Hot Rolled Duplex UNS S32750 Super Duplex Blooms Hot Rolled Super Duplex UNS S32750 F53 Rods
Super Duplex UNS S32750 F53 Rolled Bar ASTM A276 UNS S32750 Rolled Billets Super Duplex UNS S32750 F53 Rolled Blooms Rolled Rods
UNS S32750 F53 Super Duplex Forged Bar ASTM A276 UNS S32750 Forged Billets S32750 Super Duplex Forged Blooms UNS S32750 F53 Forged Rods
Cold Rolled Duplex UNS S32750 Bar Cold Rolled ASTM A276 UNS S32750 Billets Cold Rolled UNS S32750 F53 Super Duplex Blooms Cold Rolled ASTM A276 S32750 Rods
Super Duplex UNS S32750 F53 Annealed Bar ASTM A276 UNS S32750 Annealed Billets ASTM A276 S32750 Super Duplex Annealed Blooms Saf 2507 UNS S32750 Annealed Rods
Continuous Cast ASTM A276 UNS S32750 Bar UNS S32750 F53 Continuous Cast Billets Saf 2507 UNS S32750 Continuous Cast Blooms S32750 Super Duplex Concast Rods
Quenched & Tempered Saf 2507 UNS S32750 Bar ASTM A276 UNS S32750 Super Duplex Quenched & Tempered Billets Super Duplex UNS S32750 F53 Quenched & Tempered Blooms Quenched & Tempered S32750 Super Duplex Rods
S32750 Super Duplex Normalized Bar UNS S32750 F53 Super Duplex Normalized Billets ASTM A276 UNS S32750 Normalized Blooms ASTM A276 S32750 Normalized Rods
ASTM A276 S32750 Super Duplex Black Bar Saf 2507 UNS S32750 Super Duplex Black Billets Super Duplex UNS S32750 F53 Black Blooms Super Duplex ASTM A276 UNS S32750 Black Rods
Hardened & Tempered Super Duplex UNS S32750 F53 Bar S32750 Super Duplex Hardened & Tempered Billets Hardened & Tempered ASTM A276 UNS S32750 Super Duplex Blooms Hardened & Tempered UNS S32750 F53 Rods
Super Duplex ASTM A276 S32750 Peeled Bar ASTM A276 UNS S32750 Peeled Billets Peeled Super Duplex F53 Blooms UNS S32750 F53 Super Duplex Peeled Rods
UNS S32750 F53 Super Duplex Bright Bar UNS S32750 F53 Super Duplex Bright Billets UNS S32750 F53 Super Duplex Bright Blooms S32750 Super Duplex Bright Rods
UNS S32750 F53 Bar Shape UNS S32750 F53 Billets Shape S32750 Duplex Stainless Steel Blooms Shape S32750 Duplex Stainless Steel Rods Shape
Super Duplex F53 Grinded Machined Bar Grinded Machined S32750 Duplex Stainless Steel Billets Grinded Machined S32750 Super Duplex Blooms Grinded Machined Super Duplex F53 Rods
UNS S32750 F53 Round Bar Super Duplex F53 Round Billets Super Duplex UNS S32750 F53 Round Blooms Super Duplex F53 Round Rod
Super Duplex F53 Square Bar S32750 Duplex Stainless Steel Square Billets UNS S32750 F53 Super Duplex Square Blooms Super Duplex Stainless Steel F53 Square Rods
UNS S32750 F53 Flat Bar Super Duplex UNS S32750 F53 Flat Billets Super Duplex F53 Flat Blooms Super Duplex 2507 UNS S32750 Flat Rods
Super Duplex Stainless Steel F53 Flat Block Bar Super Duplex F53 Flat Block Billets Super Duplex 2507 UNS S32750 Flat Block Blooms Saf 2507 UNS S32750 Flat Block Rods
Super Duplex 2507 UNS S32750 Round Corner Square Bar Super Duplex Stainless Steel F53 Round Corner Square Billets Super Duplex F53 Round Corner Square Blooms S32750 Duplex Stainless Steel Round Corner Square Rods
Super Duplex F53 Hexagonal Bar Super Duplex Stainless Steel F53 Hexagonal Billets Duplex UNS S32750 Hexagonal Blooms Super Duplex 2507 UNS S32750 Hexagonal Rods
Super Duplex Stainless Steel F53 Rectangular Bar Super Duplex F53 Rectangular Billets Super Duplex Stainless Steel F53 Rectangular Blooms S32750 Duplex Stainless Steel Rectangular Rods
Saf 2507 UNS S32750 Circular Bar Duplex UNS S32750 Circular Billets Duplex UNS S32750 Circular Blooms S32750 Duplex Stainless Steel Circular Rods
Duplex UNS S32750 Hollow Ring Bar Super Duplex Stainless Steel F53 Hollow Ring Billets S32750 Duplex Stainless Steel Hollow Ring Blooms Super Duplex Stainless Steel F53 Hollow Ring Rods
Super Duplex Stainless Steel F53 Hollow Bar Duplex UNS S32750 Hollow Billets Super Duplex Stainless Steel F53 Hollow Blooms Saf 2507 UNS S32750 Hollow Rods

 

Stockist of Duplex UNS S32750 Bright Round Bar, Super Duplex F53 Black Bar distributors in Dubai, UAE. UNS S32750 F53 Round Bar manufacturers in India
India's largest 1.4410 Werkstoff S32750 Round Bar & ASTM A276 UNS S32750 Flat Bar stock in India & Dubai (UAE), UNS S32750 Round Bar suppliers