Titanium Grade 2 Fasteners

Supplies a full range of Titanium Grade 2 Bolts, Grade 2 Titanium Screws, Titanium Gr.2 Nuts at Factory price in India

carries a complete line of Titanium Gr.2 Bolts, Titanium Gr.2 Washers, Titanium Gr.2 Stud Bolt in mumbai, India

Titanium grade 2 is also known as commercially pure or CP titanium is not alloyed.A characteristic of Titanium Grade 2 Fasteners is its higher content of elements like iron and oxygen as compared to other CP grades.The addition of these two elements in the Titanium Gr.2 Stud Bolt offers excellent formability and moderate strength with superior corrosion resistance.  The Titanium Gr.2 Bolts is most widely used in heat exchangers.  The tensile strength of CP grade 2 is a minimum of 275 Mpa.

Titanium Grade 2 Threaded Rod
Titanium Grade 2 Threaded Rod
Titanium Grade 2 Fasteners
Titanium Grade 2 Fasteners
Titanium Grade 2 Hex Bolt
Titanium Grade 2 Hex Bolt
Titanium Grade 2 Bolts
Titanium Grade 2 Bolts
Titanium Grade 2 Nuts And Bolts
Titanium Grade 2 Nuts And Bolts
Titanium Grade 2 Studs
Titanium Grade 2 Studs

As Titanium grade 2 has good mechanical and physical properties, the Titanium Grade 2 Screws is an ideal candidate considered to be used in industries like for chemical, marine, aerospace and medical applications. Common Applications of Titanium Gr.2 Washers include its use in Chemical processing condensers, evaporators, reaction vessels, Electroplating, Airframe skins, ductwork, brackets, galley equipment, Cryogenic vessels, Gaskets, Medical devices, Desalinization plant tubing and tube heaters, Annealing between a temperature range of 1103° F to 1400 ° F for about two hours is to be carried out for the Titanium Grade 2 Bolts. Following which, the alloy is air cooled in order to relieve stress.

The machinability of cp titanium grade 2 can be compared to austenitic stainless steel grades. Titanium Grade 2 Fasteners can be machined using - heavy feed rate, low speed and abundant cutting fluid. Although cp titanium grade 2 can be machined by chipping, safety measures must be employed during the machining process as titanium chips are extremely combustible. The Titanium Gr.2 Nuts can be worked by either hot rolling, forging, hot press. This alloy can also be stretched, head, stamped, Bent and drawn at room temperature.

As compared to grade 5, titanium grade 2 is cost efficient due to its low alloying content.Although both grades i.e. – CP titanium grade 2 and grade 5 tend to offer exceptional resistance to corrosion with regards to chlorine and chlorine containing compounds as well as salt water or brine, the alloy for grade 5 is slightly resistant as compared to Grade 2 Titanium Screws. Hence, it is generally seen that Titanium Gr.2 Washers & Titanium Grade 2 Bolts are used in those applications where the fasteners have a high chance of falling a prey to corrosion.

 

Titanium Grade 2 Fasteners Specifications

Titanium Grade 2 Fasteners Specifications
ASTM B348/ ASME SB348
Titanium Grade 2 Fasteners Standard
DIN, ASTM, BS and all International Standards
Titanium Grade 2 Fasteners Length
3 mm to 200 mm
Titanium Grade 2 Nuts Size
M3 - M56 | 3/6" to 2" | Custom Sizes
Titanium Grade 2 Bolt / Screw Size
M3 - M56 | 3/6" to 2" | Custom Sizes
Titanium Grade 2 Machine Screws Size
M1.6 - M12
Titanium Grade 2 Washers Size
M3 - M56 | 3/6" to 2" | Custom Sizes
Titanium Fasteners Type
Hex Set Screw, Cap Screw, Machine Screw, Wing Screw, Spring Washers, Washers, Studs, Marine Anchors, Anchors, Hexagon Nut,U- Bolts, Anchor Bolt, Mushroom Head Square Neck Bolts, J Bolts,Eye Bolt,Structural Bolts, Bolts, Nuts, Sockets, Screws, Allen Cap screw, Nut, Hex Coupling Nut, Hex Nut, Square Nut, Hex Domed Cap Nuts, Hex Head Bolts, Stud Bolts, Socket Hexagon Head Screw, Pan Head Screw, Socket Head Cap Screw, Wing Screw, T-Head Bolts, Foundation Bolts,Screw, Studs, Socket Screw

 

Grade 2 Titanium Price

  •  Gr 2 Titanium Bolt/Nut
    FOB Price : US $2500-1000 / Ton
  •  Titanium Grade 2 Spring Lock Washers with Square Ends
    FOB Price : US $0.02-0.04 / Piece
  •  Grade 2 titanium hexagon nuts
    FOB Price : US $0.8-2.8 / Piece
  •  ASTM B348 Gr 2 Titanium Bolt/Nut
    FOB Price : US $850 / Metric Ton
  •  High quality grade 2 titanium hex bolts
    FOB Price : US $0.8-5 / Piece
  •  Bolt/Nut astm B348 Gr 2
    FOB Price : US $700-500 / Ton
  •  Titanium Bolt/Nut Gr 2
    FOB Price : US $500 / Ton
  •  grade 2 titanium bolt fasteners
    FOB Price : US $0.085-0.1 / Piece
  •  Gr 2 Bolt/Nut manufacturer
    FOB Price : US $850-500 / Metric Ton
  •  SB348 Gr 2 Bolt/Nut
    FOB Price : US $1.5-9 / Kilogram
  •  Titanium Grade 2 High Quality Stud Bolts
    FOB Price : US $0.05-0.5 / Piece
  •  ASTM B348 Gr 2 Bolt/Nut
    FOB Price : US $500-1000 / Ton

 

Dimensions of Titanium Grade 2 Hex Nuts

 

Dimensions of Titanium Grade 2 Hex Nuts

**All measurements in millimeters**

Nominal Size or Basic Major Thread Diameter
F
G
H
Width
Across Flats
Width
Across Corners
Thickness
Basic
Max
Min
Max
Min
Basic
Max
Min
1/4
.2500
7/16
.438
.428
.505
.488
7/32
.226
.212
5/16
.3125
1/2
.500
.489
.577
.557
17/64
.273
.258
3/8
.3750
9/16
.562
.551
.650
.628
21/64
.337
.479
7/16
.4375
11/16
.688
.675
.794
.768
3/8
.385
.365
1/2
.5000
3/4
.750
.736
.866
.840
7/16
.448
.427
9/16
.5625
7/8
.875
.861
1.010
.982
31/64
.496
.473
5/8
.6250
15/16
.938
.922
1.083
1.051
35/64
.559
.535
3/4
.7500
1-1/8
1.125
1.088
1.299
1.240
41/64
.665
.617
7/8
.8750
1-5/16
1.312
1.269
1.516
1.447
3/4
.776
.724
1
1.0000
1-1/2
1.500
1.450
1.732
1.653
55/64
.887
.831
1-1/8
1.1250
1-11/16
1.688
1.631
1.949
1.859
31/32
.999
.939
1-3/8
1.3750
2-1/16
2.062
1.994
2.382
2.273
1-11/64
1.206
1.138
1-1/2
1.500
2-1/4
2.250
2.175
2.598
2.480
1-9/32
1.ASTM A194 GR. 8
1.245
1-5/8
1.6250
2-7/16
2.438
2.356
2.815
2.686
1-25/64
1.429
1.353
1-3/4
1.7500
2-5/8
2.625
2.538
3.031
2.893
1-1/2
1.540
1.460
2
2.0000
3
3.000
2.900
3.464
3.306
1-23/32
1.763
1.675
2-1/4
2.2500
3-3/8
3.375
3.263
3.897
3.719
1-15/16
1.986
1.890
2-1/2
2.5000
3-3/4
3.750
3.625
4.330
4.133
2-5/32
2.209
2.105
2-3/4
2.7500
4-1/8
4.125
3.988
4.763
4.546
2-3/8
2.431
2.319

 

Titanium Gr 2 Bolts Dimensions

Grade 2 Titanium Hex Bolt Dimension

Titanium Grade 2 Bolts Dimensions

**All measurements in millimeters**

NOMINAL SIZE (D)
BODY DIAMETER
HEAD THICKNEASTM B348
ACROASTM B348 THE FLATS
ACROASTM B348 CORNERS
D (MAX)
D (MIN)
H (MAX)
H (MIN)
F (MAX)
F (MIN)
C (MAX)
C (MIN)
m10
10.00
9.78
6.63
6.17
17.00
15.73
18.48
17.77
m12
12.00
11.73
7.76
4.24
19.00
17.73
20.78
20.03
m14
14.00
13.73
9.09
8.51
22.00
20.67
24.25
23.35
m16
16.00
15.73
10.32
9.68
24.00
23.67
27.71
26.75
m20
20.00
19.67
12.88
12.12
30.00
29.16
34.64
32.95
m24
24.00
23.67
15.44
14.56
36.00
35.00
41.57
39.55
m30
30.00
29.67
19.48
17.92
46.00
45.00
53.12
50.85
m36
36.00
35.61
23.38
21.63
55.00
53.80
63.51
60.79
m42
42.00
41.38
26.97
25.03
65.00
62.90
75.06
71.71
m48
48.00
47.38
31.07
28.93
75.00
72.60
86.60
82.76
m56
56.00
55.26
36.2
33.80
85.00
82.20
98.15
93.71
m64
64.00
63.26
41.32
38.68
95.00
91.80
109.70
104.65
m72
72.00
71.26
46.45
43.55
105.00
101.40
121.24
115.60
m80
80.00
79.26
51.58
48.42
115.00
111.00
132.72
126.54
m90
90.00
89.13
57.74
54.26
130.00
125.50
150.11
143.07
m100
90.00
99.13
63.9
60.10
145.00
140.00
167.43
159.60

 

Titanium Grade 2 Flat Washer Dimensions

Bolt Size
USS
SAE
OD (in.)
ID (in.)
Thickness
OD (in.)
ID (in.)
Thickness
1/8 (#6)
-
-
-
0.375
0.156
.036/.065
5/32 (#8)
-
-
-
0.438
0.188
.036/.065
3/16 (#10)
0.560
0.250
.036/.065
0.500
0.220
.036/.065
7/32 (#12)
-
-
-
0.562
0.250
.051/.080
1/4 (#14)
0.734
0.312
.051/.080
0.625
0.281
.051/.080
5/16
0.875
0.375
.064/.104
0.688
0.344
.051/.080
3/8
1.000
0.438
.064/.104
0.812
0.406
.051/.080
7/16
1.250
0.500
.064/.104
0.922
0.469
.051/.080
1/2
1.375
0.562
.086/.132
1.062
0.531
.074/.121
9/16
1.469
0.625
.086/.132
1.156
0.594
.074/.121
5/8
1.750
0.688
.108/.160
1.312
0.656
.074/.121
3/4
2.000
0.812
.122/.177
1.469
0.812
.108/.160
7/8
2.250
0.938
.136/.192
1.750
0.938
.108/.160
1
2.500
1.062
.136/.192
2.000
1.062
.108/.160
1 1/8
2.750
1.250
.136/.192
2.250
1.250
.108/.160
1 1/4
3.000
1.375
.136/.192
2.500
1.375
.136/.192
1 3/8
3.250
1.500
.153/.213
2.750
1.500
.136/.213
1 1/2
3.500
1.625
.153/.213
3.000
1.625
.153/.213
1 5/8
3.750
1.750
.153/.213
-
-
-
1 3/4
4.000
1.875
.153/.213
-
-
-
1 7/8
4.250
2.000
.153/.213
-
-
-
2
4.500
2.125
.153/.213
-
-
-
2 1/4
4.750
2.375
.320/.248
-
-
-
2 1/2
5.000
2.625
.210/.280
-
-
-
2 3/4
5.250
2.875
.228/.410S
-
-
-
3
5.500
3.125
.249/.327
-
-
-

 

Dimensions Of Titanium UNS R50400 Socket Head Cap Screw

Dimensions Of Titanium UNS R50400 Socket Head Cap Screw

 

Nominal
Thread.
Hex Socket Size
Body diameter and Head height
Head Dia
Soc. length
Size
Pitch
Max
Min
Max
Min
J
D /H
A
K
M3
0.5
2.50
3.00
2.86
5.50
5.20
1.3
M4
0.70
3.00
4.00
3.82
7.00
6.64
2.00
M5
0.8
4.00
5.00
4.82
8.50
8.14
2.70
M6
1.0
5.00
6.00
5.82
10.00
9.64
3.30
M8
1.25
6.00
8.00
7.78
13.00
12.57
4.3
M10
1.5
8.00
10.00
9.78
16.00
15.57
5.50
M12
1.75
10.00
12.00
11.73
18.00
17.57
6.60
M16
2.0
14.00
16.00
15.73
24.00
23.48
8.80
M20
2.5
17.00
20.00
19.67
30.00
29.48
10.70
M24
3.0
19.00
24.00
23.67
36.00
35.38
12.90

 

Size Chart of Titanium Grade 2 Nuts

Titanium Grade 2 Nuts Size Chart

Nut Size
(mm)
Diameter*
(mm)
Height
(mm)
Hex Nut
Jam Nut
Nylock Nut
2
4
1.6
1.2
-
2.5
5
2
1.6
-
3
5.5
2.4
1.8
4
4
7
3.2
2.2
5
5
8
4
2.7
5
6
10
5
3.2
6
7
11
5.5
3.5
-
8
13
6.5
4
8
10
17
8
5
10
12
19
10
6
12
14
22
11
7
14
16
24
13
8
16
18
27
15
9
18.5
20
30
16
10
20
* This is the diameter across the flats. It is also the size of wrench to use.

 

Size Chart of Titanium Grade 2 Screws

Size Chart of Titanium Grade 2 Screws

 

Size Chart of Titanium Grade 2 Washer

Size Chart of Titanium Grade 2 Washer

Size
USS
SAE
Inside Diameter
(A)
Outside Diameter
(B)
Thickness
(C)
Inside Diameter
(A)
Outside Diameter
(B)
Thickness
(C)
#2
-
-
-
3/32"
1/4"
0.020"
#4
-
-
-
1/8"
5/16"
0.032"
#6
-
-
-
5/32"
3/8"
0.049"
#8
-
-
-
3/16"
7/16"
0.049"

 

Titanium Grade 2 Bolts Type

Ti Grade 2 Heavy Hex Bolts
Ti Grade 2 Heavy Hex Bolts
SB348 Ti Grade 2 Hex Bolts
SB348 Ti Grade 2 Hex Bolts
Gr 2 Ti Lag Bolts
Gr 2 Ti Lag Bolts
DIN 3.7035 Ti Anchor Bolts
DIN 3.7035 Ti Anchor Bolts
Ti UNS R50400 Carriage Bolts
Ti UNS R50400 Carriage Bolts
Titanium Allen Cap Bolt
Titanium Allen Cap Bolt
DIN 3.7035 Ti Countersunk Bolts
DIN 3.7035 Ti Countersunk Bolts
Grade 2 Flange Bolts
Grade 2 Flange Bolts
Ti Grade 2 Square Bolts
Ti Grade 2 Square Bolts
Gr 2 Ti Hex Head Bolts
Gr 2 Ti Hex Head Bolts
ASME SB348 Ti Grade 2 U Bolts
ASME SB348 Ti Grade 2 U Bolts
Gr 2 Ti Eye Bolts
Gr 2 Ti Eye Bolts

 

Titanium Grade 2 Studs Types

B348 Ti Grade 2 Stud Bolts
B348 Ti Grade 2 Stud Bolts
Gr 2 Ti Double Ended Studs
Gr 2 Ti Double Ended Studs
SB348 Gr 2 Ti Tie Bars
SB348 Gr 2 Ti Tie Bars
Gr 2 Ti Threaded Rod
Gr 2 Ti Threaded Rod
ASME SB348 Gr 2 Ti Tie Rods
ASME SB348 Gr 2 Ti Tie Rods

 

Titanium Grade 2 Nuts Types

Grade 2 Acorn Nuts
Grade 2 Acorn Nuts
Ti UNS R50400 T Nuts
Ti UNS R50400 T Nuts
Titanium Grade 2 Serrated Flange Nuts
Titanium Grade 2 Serrated Flange Nuts
Titanium Grade 2 Nyloc Nuts
Titanium Grade 2 Nyloc Nuts
SB348 Ti Grade 2 Wing Nuts
SB348 Ti Grade 2 Wing Nuts
Grade 2 Panel Nuts
Grade 2 Panel Nuts
B348 Ti Grade 2 Coupling Nuts
B348 Ti Grade 2 Coupling Nuts
ASME SB348 Gr 2 Ti Dome Nuts
ASME SB348 Gr 2 Ti Dome Nuts
UNS R50400 Ti Square Nuts
UNS R50400 Ti Square Nuts
Gr 2 Ti Hex Head Nuts
Gr 2 Ti Hex Head Nuts
B348 Ti UNS R50400 Hex Nuts
B348 Ti UNS R50400 Hex Nuts
ASME SB348 Gr 2 Ti Eye Nuts
ASME SB348 Gr 2 Ti Eye Nuts
SB348 Gr 2 Ti Heavy Hex Nuts
SB348 Gr 2 Ti Heavy Hex Nuts
Grade 2 Lock Nut
Grade 2 Lock Nut
Titanium Grade 2 Self Locking Nuts
Titanium Grade 2 Self Locking Nuts
Titanium Grade 2 Nylon Insert Nuts
Titanium Grade 2 Nylon Insert Nuts

 

Titanium Grade 2 Washers Types

Titanium UNS R50400 Ogee Washers
Titanium UNS R50400 Ogee Washers
Titanium Grade 2 Split Washers
Titanium Grade 2 Split Washers
Titanium Grade 2 Flat Washers
Titanium Grade 2 Flat Washers
EN 3.7035 Ti Star Washers
EN 3.7035 Ti Star Washers
Gr 2 Ti Dock Washers
Gr 2 Ti Dock Washers
Ti Grade 2 Belleville Washers
Ti Grade 2 Belleville Washers
Titanium Grade 2 Fender Washer
Titanium Grade 2 Fender Washer
Ti Grade 2 Countersunk Finishing Washer
Ti Grade 2 Countersunk Finishing Washer
Titanium Grade 2 Square Washers
Titanium Grade 2 Square Washers
UNS R50400 Ti Spring Washers
UNS R50400 Ti Spring Washers
DIN 3.7035 Titanium Lock Washers
DIN 3.7035 Titanium Lock Washers
ASME SB348 Gr 2 Ti Spherical Washers
ASME SB348 Gr 2 Ti Spherical Washers

 

Titanium Grade 2 Screws Types

Gr 2 Ti Socket Head Cap Screw
Gr 2 Ti Socket Head Cap Screw
Grade Gr 2 Ti Wing Screw
Grade Gr 2 Ti Wing Screw
DIN 3.7035 Titanium Roofing Screw
DIN 3.7035 Titanium Roofing Screw
Ti Grade Grade 2 Self Tapping Screw
Ti Grade Grade 2 Self Tapping Screw
B348 Gr 2 Ti Eye Screw
B348 Gr 2 Ti Eye Screw
Titanium UNS R50400 Concrete Screw
Titanium UNS R50400 Concrete Screw
Ti Grade 2 Thumb Screw
Ti Grade 2 Thumb Screw
Titanium Grade 2 Deck Screw
Titanium Grade 2 Deck Screw
Titanium Grade 2 Wood Screw
Titanium Grade 2 Wood Screw
 Gr 2 Ti Coach Screw
Gr 2 Ti Coach Screw
AUNS R50400 Ti Countersuck Screw
UNS R50400 Ti Countersuck Screw
DIN 3.7035 Ti Lag Screw
DIN 3.7035 Ti Lag Screw
Type Gr 2 Ti Self Drilling Screw
Type Gr 2 Ti Self Drilling Screw
Titanium Grade 2 Set Screw
Titanium Grade 2 Set Screw

 

India’s Largest Manufacturer of Cp Gr2 Titanium Material, Titanium Grade 2 Screws, cp titanium grade 2 bolts in mumbai, India

Chemical Composition of Titanium Grade 2 Fasteners
Titanium Gr 2
C
Ti
N
Fe
H
O
V
Al
0.1 max
99.2 min
0.03 max
0.3 max
0.015 max
0.25 max

 

ASTM B348 Titanium Gr 2 Fasteners Equivalent Grade

STANDARD
UNS
WERKSTOFF NR.
Titanium Gr 2
R50400
3.7035

 

Titanium Grade 2 Fasteners Mechanical Properties

Density
Melting Point
Yield Strength (0.2%Offset)
Tensile Strength
Elongation
4.5 g/cm3
1665 °C (3030 °F)
Psi – 39900 , MPa – 275
Psi – 49900 , MPa – 344
20 %

 

Titanium Grade 2 products for sale


Titanium EN 3.7035 Fasteners
Grade 2 Titanium Anchor Bolts Stockist
Grade 2 Titanium Bolts and Nuts
Grade 2 Titanium Tower Bolts Wholesaler
Grade 2 Titanium Lock Nuts
Grade 2 Ti Dock Washer
UNS R50400 Titanium Tie Bar
Titanium Grade 2 Stud Bolts
DIN 3.7035 Titanium Stud Strength
Grade 2 Titanium Threaded Rod
Titanium Grade 2 Hex Nuts
Grade 2 Titanium Eye Bolt Manufacturer
Grade 2 Titanium Hex Nuts Torque
Grade 2 Ti Roofing Screw
ASME SB348 Titanium Spherical Washer
Grade 2 Titanium Stove Bolts Exporter
Titanium Grade 2 Tek Screw
UNS R50400 Titanium U Bolts Supplier
Cp Gr2 Titanium Material
Cp Titanium Grade 2
Cp Gr2 Titanium Material Supplier
Grade 2 Titanium Price per kg
Titanium Grade 2 products for sale
Grade 2 Titanium Price
Grade 2 Titanium Star Washer
Ti Grade 2 Lock Washer

 

Application of Ti Grade 2 Fasteners

  •  Grade 2 Ti Threaded Rod uses in Sea Water Equipment
  •  EN 3.7035 Titanium Set Screw uses in Heat Exchangers
  •  Grade 2 Titanium Fasteners uses in Pharmaceutical Equipment
  •  UNS R50400 Ti U Bolts uses in Spiral Welded tube for burner pipes and flues
  •  Titanium Gr 2 Screws uses in Gas Processing
  •  Titanium DIN 3.7035 Fasteners uses in Aircraft Exhaust Manifolds
  •  Titanium Grade 2 Bolts And Nuts uses in Pharmaceuticals
  •  Ti Grade 2 Flat Washers uses in Power Generation
  •  Grade 2 Ti Studs uses in Petrochemicals
  •  EN 3.7035 Nuts uses in Specialty Chemicals
  •  Ti Grade 2 Bolts uses in Off-Shore Oil Drilling Companies

 

View Grade 2 Titanium Screws Dimensions & weight, titanium grade 2 fasteners specifications.
Buy ASTM B348 Grade 2 Fasteners, titanium grade 2 nuts and bolts from Cp Gr2 Titanium Material Supplier at factory price in India