Some important features of the Monel 400 Flat Bar includes its resistance to seawater and steam at high temperatures, its excellent resistance to rapidly flowing brackish water, excellent resistance to stress corrosion cracking in most freshwaters. Besides this , Monel 400 alloy is particularly resistant to de-aerated halogen based acids like hydrochloric and hydrofluoric acids.It has excellent resistance to neutral and alkaline based salts & it is highly resistant to alkalis.
Table of Content
In fact, Alloy 400 is practically immune to chloride related ion stress corrosion cracking in typical environments. Although, its corrosion resistance is very good in reductive environments, it is considered to be poor in oxidative conditions.The Monel 400 Hex Bar is not useful in oxidative acid environments, such as nitric acid and nitrous. Further, this nickel based alloy gets attacked in environments where there is a presence of sulfur-bearing gases at a temperature of approximately 700° F & above. Also, molten sulfur attacks the alloy 400 at temperatures over approximately 500° F.
Monel 400 Rod is known to have great mechanical properties at even at subzero temperatures. The alloy can be used in temperatures up that go to 1000° F. Monel 400 has a high melting point, it melts between the temperature range of 2370° F - 2460° F. Since alloy 400 has low strength in an annealed condition , a variety of tempering techniques may be used to increase the tensile strength.
Even though the Monel 400 Bar Stock tends to offers about the same or similar corrosion resistance as plain nickel, the maximum working pressure and temperatures achieved is high. Besides this , the alloy is considered as cost-efficient due to its superior ability to yield good results after being machined.Typical applications of the ASTM B164 Monel 400 Forged Bar include Industrial heat exchangers, Marine engineering, Crude petroleum stills, Crude oil distillation towers, Boiler feed water heaters and other heat exchangers, De-aerating heaters, Chlorinated solvents, Gasoline & freshwater tanks, Chemical and hydrocarbon processing equipment
Monel 400 can easily be welded by using techniques like either gas-tungsten arc, gas metal arc or shielded metal arc. Additionally, it is important that the alloy be processed by using appropriate filler metals. Although there is no need for a post weld heat treatment, the alloy must be cleaned thoroughly after welding. Cleaning post welding is critical in order to gain optimum
corrosion resistance. Or else, there is a risk of contamination and embrittlement.Fabricated finished Monel 400 can have a wide range of enhanced mechanical properties when there is an appropriate amount of control on hot or cold working and the selection of proper thermal treatments is done.Similar to most other nickel based alloys, Monel 400 is tough to machine and tends to work harden. Although, the alloy can yield excellent results if correct techniques are used for tooling and machining.
Manifold Pipe Solution Inc. is the dealers, distributed and Monel 400 Round Bar Suppliers.
Specifications: ASTM B164, AMS 4730, AMS 4675, AMS 4731
Monel 400 Specifications: ASTM B164, ASME SB164, UNS N04401
International Specifications: DIN 17753, QQ-N-281, BS3076NA13, VdTUV 263
Specification | ASTM B164 UNS N04400 |
---|---|
Grade | Monel 400 – UNS N04400 |
Monel 400 Bar Stock size (Round) | Diameter: 3-~800mm |
Monel 400 Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Monel 400 Hex Bar size | 2-100mm A/F |
Monel 400 Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
Monel 400 Square bar size | 4 to 100mm |
Section | 3.0 to 12.0mm thickness |
Monel 400 Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Monel 400 Billet Size | 1/2" to 495mm Diameter |
Monel 400 Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 201mm ID) |
Monel 400 Rectangles Size | 33 x 30mm to 295 x 1066mm |
Monel 400 Round Bar Standard Dimensions | Diameter / Height: |
Finish | centreless ground, Cold (bright) drawn, smooth turned, hot rolled, slit rolled edge, peeled, Rough Turned, Bright, hot rolled annealed, Grinding, Polish, Centreless Ground & Black |
Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline, Polished |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Technique | Monel 400 Cold Drawn, Hot Rolled, Forged Round Bar, Cold Rolled, Rod |
Condition | Hardened & tempered, annealed |
Monel 400 Round Bar Processing | Bar cutting to 650mm |
Form | I/H Bar, Forging, Precision Ground Bar, Channel Bar, Square, Flat Bar, Round Rod, Blocks, Hollow, Rings, Triangle, Rectangle, Hex (A/F), Round, Threaded, Rod, Half Round Bar, T-Bar, Billet, Profiles, Ingot, etc. |
Our stockyad location for fast delivery across India | Bhubaneswar, Coimbatore, Ahmedabad, Agra, Pune, Mumbai, Thiruvananthapuram, Dhanbad, Shivamogga, Noida, Tirunelveli, Tiruchirappalli, Bengaluru, Pimpri-Chinchwad, Hyderabad, Chennai, Navi Mumbai |
Our Monel 400 Round bar conforms to NACE MR0175/ISO 15156 |
H&T |
Hardened and tempered. |
ANN |
Annealed |
PH |
Precipitation hardened. |
CD |
Cold drawn |
P |
Polished |
BD |
Bright drawn |
SRE |
Slit rolled edge |
CG |
Centreless ground |
HF |
Hot finished |
CF |
Cold finished |
HRAP |
Hot rolled annealed and pickled |
P&T |
Peeled and turned |
RT |
Rough turned/peeled |
ST |
Smooth turned |
PR |
Peeled and reeled |
Monel Monel 400 Round Bar Price in India |
Quantity |
Price List |
---|---|---|
Price of Monel 400 Hex Bar / Rod 10 (A/F) x 1000mm Length |
1 |
$101.16 |
Price of Monel 400 Hex Bar / Rod 10 (A/F) x 1000mm Length |
3 |
$256.52 |
Price of Monel 400 Hex Bar / Rod 10 (A/F) x 1000mm Length |
5 |
$368.11 |
Price of Monel 400 Hex Bar / Rod 10 (A/F) x 2000mm Length |
1 |
$182.65 |
Price of Monel 400 Hex Bar / Rod 10 (A/F) x 2000mm Length |
3 |
$427.12 |
Price of Monel 400 Round Bar 10.0 dia x 500mm long |
1 |
£63.00 |
Price of Monel 400 Round Bar 10.0 dia x 500mm long |
2 |
£96.00 |
Price of Monel 400 Round Bar 10.0 dia x 500mm long |
3 |
£128.00 |
Price of Monel 400 Round Bar 10.0 dia x 500mm long |
4 |
£153.00 |
Price of Monel 400 Round Bar 10.0 dia x 500mm long |
5 |
£175.00 |
Price of Monel 400 Round Bar 10.0 dia x 1000mm long |
1 |
£81.00 |
Price of Monel 400 Round Bar 10.0 dia x 1000mm long |
2 |
£129.00 |
Price of Monel 400 Round Bar 10.0 dia x 1000mm long |
5 |
£264.00 |
Price of Monel 400 Round Bar 10.0 dia x 2000mm long |
1 |
£120.00 |
Price of Monel 400 Round Bar 10.0 dia x 2000mm long |
2 |
£202.00 |
*Approx price, please contact for final price.
Type |
SIZES (mm) |
SIZES (Inches) |
ISO Tolerance |
---|---|---|---|
Cold Drawn and Polish |
3.00 - 75.00 |
1/8 - 3.00 |
h8-h9-h10-h11 |
Cold Drawn and Ground |
10.00 - 75.00 |
5/6 - 2.50 |
h8-h9-h10-h11 |
Peeled and Polished |
40.00 - 150.00 |
1.50 - 6.00 |
h11, h11-DIN 1013 |
Peeled and Ground |
20.00 - 50.00 |
3/4 - 2.00 |
h9-h10-h11 |
Monel 400 Bars Standard lengths of 2010 mm up to 6000 mm. Cut to size on request (tolerance +2/-0 mm).
5.0 |
45.0 |
6.0 |
50.0 |
7.0 |
55.0 |
8.0 |
60.0 |
9.0 |
65.0 |
10.0 |
70.0 |
12.0 |
75.0 |
16.0 |
80.0 |
20.0 |
90.0 |
25.0 |
100.0 |
30.0 |
130.0 |
35.0 |
160.0 |
40.0 |
201.0 |
AMS 4675, AMS 4730, AMS 4731 Monel 400 Rod, Bar Stock List
Alloy |
Product form |
Dimension (in mm) |
---|---|---|
MONEL ALLOY 400 (66 Ni/34 Cu) |
Hexagon bar |
48.0 a/f, Weight=17.18 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Square bar, Rod, cold drawn |
25x25, Weight=5.7 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, solution annealed, ground, polished |
Dia=6.35, Weight=0.27 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, cold drawn, annealed |
Dia=8.0, Weight=0.43 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, drawn, ground |
Dia=10.0, Weight=0.7 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, cold drawn, annealed |
Dia=12.0, Weight=1.1 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, annealed, peeled |
Dia=16.0, Weight=1.9 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, hot finished, ground, annealed |
Dia=20.0, Weight=2.9 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, cold drawn, stress relieved |
Dia=25.0, Weight=4.5 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, hot worked, annealed, peeled |
Dia=30.0, Weight=6.4 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, hot worked, annealed, peeled |
Dia=35.0, Weight=8.7 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, extruded, machined, annealed |
Dia=40.0, Weight=11.0 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, hot worked, annealed, peeled |
Dia=45.0, Weight=14.0 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, hot worked, peeled, annealed |
Dia=50.0, Weight=17.6 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, hot worked, peeled, annealed |
Dia=60.0, Weight=25.6 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, hot finished, annealed, peeled |
Dia=65.0, Weight=30.0 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, forged, peeled, annealed |
Dia=75.0, Weight=40.0 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, forged, peeled, annealed |
Dia=80.0, Weight=44.0 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, forged, annealed, peeled |
Dia=85.0, Weight=49.0 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, hot worked, peeled, annealed |
Dia=100.0, Weight=71.0 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, forged, peeled, annealed |
Dia=115.0, Weight=92.0 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, hot worked, annealed, peeled |
Dia=127.0, Weight=109 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, hot finished, annealed, peeled |
Dia=130.0, Weight=118 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, hot finished, annealed, peeled |
Dia=140.0, Weight=133 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, annealed, peeled |
Dia=150.0, Weight=153 kg/m |
MONEL ALLOY 400 (64Ni/34 Cu) |
Round bar, Rod, forged, peeled, annealed |
Dia=165.0, Weight=190 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, annealed, forged |
Dia=170.0, Weight=196 kg/m |
MONEL ALLOY 400 (66 Ni/34 Cu) |
Round bar, Rod, hot finished, annealed, peeled |
Dia=200.0, Weight=271 kg/m |
Monel® alloy 400 Rod, Diameter:3.0mm, Temper: Annealed |
Monel® alloy 400 Rod, Diameter:6.35mm, Temper: As drawn |
Monel® alloy 400 Rod, Diameter:12.7mm, Temper: As drawn |
Monel® alloy 400 Rod, Diameter:20mm, Temper: Annealed |
Monel® alloy 400 Rod, Diameter:40mm, Temper: Annealed |
Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
---|---|---|---|---|
8.9 g/cm3 |
1446 °C (2635 °F) |
Psi – 67000 , MPa – 462 |
Psi – 21500 , MPa – 148 |
45 % |
Grade |
Ni |
Fe |
C |
Mn |
Si |
Cu |
Mg |
Ti |
S |
---|---|---|---|---|---|---|---|---|---|
Monel 400 |
99.0 min |
0.4 max |
0.02 max |
0.35 max |
0.2 max |
0.25 max |
0.15 max |
0.1 max |
0.01 max |
STANDARD |
WERKSTOFF NR. |
UNS |
GOST |
AFNOR |
JIS |
BS |
EN |
---|---|---|---|---|---|---|---|
Monel 400 |
2.4068 |
N04400 |
НП-2 |
- |
NW 2201 |
NA 12 |
NLC-Ni 99 |
ASTM B164 400 Monel Bright Bar |
Monel 400 Hex Bar |
Monel 400 Bright Bar |
Monel Alloy 400 Bright Bar |
400 Monel Hexagonal Bar |
400 Monel Alloy Hex Bar |
ASTM B164 UNS N04400 Hexagonal Bar |
ASTM B164 400 Monel Hex Bar |
Monel 400 Welding Rod |
WERKSTOFF NR. 2.4360 Bright Bar |
Monel 400 Square Bar |
Monel 400 Tig Rod |
WERKSTOFF NR. 2.4360 Square Bar |
ASTM B164 400 Monel Square Bars |
400 Monel Alloy Square Bar |
ASTM B164 UNS N04400 Square Bar |
400 Monel Alloy Rectangular Bar |
ASTM B164 UNS N04400 Tig Rod |
Monel 400 Rectangular Bar |
400 Monel Rectangular Bars |
Monel 400 Flat Bar |
400 Monel Alloy Flat Bars |
WERKSTOFF NR. 2.4360 Rectangular Bar |
ASTM B164 Monel 400 Rectangular Bar |
WERKSTOFF NR. 2.4360 Flat Bars |
ASTM B164 Monel 400 Threaded Rod |
Monel 400 Shaft |
ASME SB 164 N04400 Forged Rod |
400 Monel Alloy Polished Bar |
ASME SB 164 N04400 Polished Bars |
Monel 400 Polished Bar |
400 Monel Polished Bars |
Monel 400 Threaded Bar |
400 Monel Threaded Bars |
Werkstoff 2.4360 Monel Filler Rod |
ASTM B164 Monel 400 Polished Bar |
Monel 400 Threaded Rod |
ASTM B164 Monel 400 Forged Bar |
Monel 400 Hex Bar |
Monel UNS N04400 Threaded Bar |
400 Monel Alloy T-Bar |
Monel UNS N04400 T-Bar |
Monel 400 T-Bar |
400 Monel T-Bar |
400 Monel Hollow Bar |
400 Monel Alloy Hollow Bar |
ASTM B164 Monel 400 Tig Rod |
Monel 400 Hollow Bar |
Monel Bar Stock |
400 Monel Precision Ground Stock |
UNS N04400 Monel Hollow Bar |
ASTM B164 Monel Flat Bar |
ASTM B164 Monel 400 Precision Ground Stock |
Monel 400 Rod |
400 Monel Alloy Precision Ground Stock |
UNS N04400 Monel Filler Rod |
UNS N04400 Monel Rod |
ASTM B164 Monel 400 Rod |
400 Monel Rod |
400 Monel Alloy Rod |
400 Monel Alloy Rounds |
UNS N04400 Monel Rounds |
Monel 400 Rounds |
400 Monel Square Bar |
400 Monel Half-Round Bar |
400 Monel Threaded Rod |
ASTM B164 Monel 400 Rounds |
Monel 400 Half-Round Bar |
Monel 400 Precision Ground Bar |
400 Monel Precision Ground Bar |
UNS N04400 Monel Flat Bar |
ASTM B164 Alloy 400 Half-Round Bar |
ASTM B164 Alloy 400 Precision Ground Bar |
Monel 400 Triangle bar |
400 Monel Alloy Precision Ground Bar |
ASTM B164 UNS N04400 Precision Ground Bar |
ASTM B164 UNS N04400 Triangle bar |
ASTM B164 400 Monel Triangle bar |
Monel UNS N04400 Bar |
Monel Alloy 400 Bar |
Werkstoff 2.4360 Bar |
ASME SB 164 N04400 Bar |
400 Monel Triangle bar |
400 Monel Alloy Triangle bar |