Ansi B16.5 Class 600 Flange Dimensions In Mm

Are you looking for 600 Lb Flange Dimensions, 600 Lb Blind Flange Dimensions, 600 Lb Rtj Flange Dimensions, 600 Lb Weld Neck & Socket Weld Flange Dimensions

Get Online 2 600 Lb Flange Dimensions, 12 600 Lb Flange Dimensions, 42 600 Lb Flange Dimensions, 30 600 Lb Flange Dimensions

A flange is a method that is used to connect pipes, valves, pumps and other equipment. 600 lb ansi flange dimensions are used to form a piping system. 600 lb weld neck flange dimensions also provides easy access for cleaning, inspection or modification. Usually, the 600 lb pipe flange dimensions are welded or screwed. Flanged joints are created by bolting together two 600 lb rf flange dimensions with a gasket between them to provide a seal.

Table of Content

The pressure rating of flange ranges between 150# to 2500#. The term "lb", "class" and "#" are used interchangeably to label the pressure rating of a particular class of flange. The fact is that the 300 or 600 lb does not correlate to a psi 300 or a 600 psi pressure rating. Pressure rating of the 600 lb rtj flange dimensions will depend on the material being used to produce it. For instance, a 30 600 lb flange dimensions manufactured from A105, stainless, nickel alloy etc. will differ from each other in terms of their properties. The pressure rating of the 42 600 lb flange dimensions will also depend on the heat treat condition and pressure "class".

Pipe 30 inch 600 lb flange dimensions can be manufactured in different materials. For instance, the 6 600 lb flange dimensions are generally manufactured from materials like stainless steel, cast iron, aluminium, brass, bronze, plastic etc. It is important to note that the most used material to  produce 600 lb slip on flange dimensions is forged carbon steel. These forged carbon steel based 600 lb socket weld flange dimensions tend to have machined surfaces.

In addition, 12 600 lb flange dimensions, like fittings and pipes, meant for specific purposes can sometimes be internally equipped with layers of materials. These layers of materials in the 600 lb blind flange dimensions could be of a completely different quality as opposed to the 1 600 lb flange dimensions themselves. These layered 2 inch 600 lb flange dimensions are known as "lined flanges".

The material of an ansi 600 lb flange dimensions, is basically set during the time of the pipe selection. In most cases, a 2 600 lb flange dimensions is of the same material as the pipe.ASME B16.5 600 lb flange dimensions, not only defines its dimensional tolerances but also the different material qualities.

 

Specifications of Class 600 Flange
Specifications Class 600 Flanges
ASME B16.5 Class 600 Flange size range 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
ansi b16.5 Class 600 Flanges Standards B16.47 Series A & B, ANSI/ASME B16.5, BS4504, B16.48, EN-1092, BS 10, DIN, ANSI Flanges, BS Flanges, ASME Flanges, EN Flanges, DIN Flanges, GOST Flanges.
ansi b16.5 Class 600 Flange Standard DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
ansi b16.5 Class 600 Flange Standard JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
ansi b16.5 Class 600 Flange Standard UNI 6Bar 10Bar 16Bar 25Bar 40Bar
ansi b16.5 Class 600 Flange Standard EN 6Bar 10Bar 16Bar 25Bar 40Bar
Main Types Threaded / Forged / Plate /Screwed
Flange supporting material Ring Joint, Gasket, Flange Bolts
ansi b16.5 Class 600 Pipe Flanges Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Most common types of ansi b16.5 Class 600Flanges
  • Slip-On Ring Flange (SORF), Class 600
  • Weld Neck Ring Flange (WNRF), Class 600
  • Threaded Ring Flange, Class 600
  • Socket Weld Ring Flange (SWRF), Class 600
  • Blind Ring Flange (BLRF), Class 600
  • Ring Type Joint Flange (RTJF), Class 600
  • Lap Joint Ring Flange (LJRF), Class 600
Production technique
  • Forged, Heat treated and machined
Connect Type/ Flange Face Type Ring Type Joint (RTJ), Raised Face (RF),Large Male-Female (LMF), Flat Face (FF),Small Male-Female (SMF), Lap-Joint Face (LJF), Large Tongue & Groove, Small Tongue, Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Class 600 Threaded Flange, Socketweld Flange, Slip-On Flange, Blind Flange, Weld Neck Flange
Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment Bending machine, Press machine, electric bevelling machine, Pushing Machine, Sand-blasting machine etc
Origin Indian / West Europe / Japan / USA / Korean
Specialized manufacturer of
  • DIN 2566 pn16
  • Rtj Flange
  • PN16 Flange
  • DIN 2566 pn10
  • DIN 2566 en 1092 1
  • Class 600 Blind Flanges
  • Class 600 Large Diameter Flange
  • Class 600 Table Flanges
  • Class 600 Sorf Flange
  • Class 600 Socketweld Flanges
  • Class 600 Threaded Flanges
  • Class 600 Weld Neck Flanges
  • Class 600 Slip-On Flanges
  • Class 600 Loose Flanges
  • Class 600 AS 4087 Water Flanges
  • Class 600 Lap Joint Flanges
  • Class 600 Plate Flanges
  • Class 600 Orifice Flanges
Class 600 Flanges Standard

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • AS 2129: Table D; Table E; Table H
  • B.S: BS4504 , BS3293, BS1560, BS10
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • German (DIN)
  • American standard (ANSI)
  • Any other specilised flanges
  • British standard (BS)
  • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
  • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638
Key markets and industries for Class 600 Flanges
  • Nuclear power (mostly seamless).
  • Heavy oil refineries.
  • Bitumen upgraders.
  • Petrochemicals and acids.
Export to India, Dubai, Ukraine, Thailand, Egypt, Indonesia, Ireland, Canada, USA, Spain, Singapore, Peru, Brazil, Oman, Iran, Korea, Saudi Arabia etc
Class 600 Flanges Application
  • To Connect Pipe & Tubes in Chemical, Petroleum, Power, Gas, Construction,Shipbuilding, Metallurgy etc
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

 

Bolt Chart of Class 600 Flange

Bolt And Stud Dimensions Chart - ASME B16.5 Flanges


600 LB. Flanges
# Bolts or Studs
Dia of Bolts or Studs
Length of Stud
1/16 RF
4
0.50
2-1/2
4
0.63
3
4
0.63
3
4
0.63
3-1/4
4
0.75
3-1/2
8
0.63
3-1/2
8
0.75
4
8
0.75
4-1/4
8
0.75
4-1/4
8
0.75
4-1/2
8
0.75
4-3/4
12
0.75
4-3/4
12
0.88
5-1/2
16
1.00
6-1/4
16
1.13
6-3/4
20
1.13
7
20
1.25
7-1/2
24
1.25
7-3/4
24
1.25
8
24
1.50
9

 

Pressure Rating of Class 600 Flange

Rating Of Carbon Steel Flanges

The Table Shows The Maximum Pressure In PSI ASTM A105 / ASTM A350 LF2 / ASTM A350 LF3 / ASTM A350 LF6

Temperature (in F°)
600#
< 100
1480
200
1360
300
1310
400
1265
500
1205
600
1135
650
1100
700
1060
750
1015
800
825
850
640
900
460
950
275
1000
170

 

Dimensions of Class 600 Flange

Class 600 LB Flange Dimensions In mm

Dimensions of Class 600 Flange
Normal
pipe
size		 Outside
dia. of
flange		 Minimum
thickness of
flange		 Overall Length Bolt Circle No. and
Size of
Holes		 O.D. of
raised
face
Welding neck Slip-on 
& socket
welding		 Lap Joint
O Q Y Diam. No. dia. R
1/2 95 14.3 52.4 22.2 22.2 66.5 4 15 35
3/4 117 15.9 57.2 25.4 25.4 82.5 4 19 43
1 124 17.5 61.9 27.0 27.0 89.0 4 19 51
1-1/4 133 20.7 66.7 28.6 28.6 98.5 4 19 64
1-1/2 156 22.3 69.8 31.8 31.8 114.5 4 22 73
2 165 25.4 73.0 36.5 36.5 127.0 8 19 92
2-1/2 190 28.6 79.4 41.3 41.3 149.0 8 22 105
3 210 31.8 82.6 46.0 46.0 168.0 8 22 127
3-1/2 229 35.0 85.7 49.2 49.2 184.0 8 25 140
4 273 38.1 101.6 54.0 54.0 216.0 8 25 157
5 330 44.5 114.3 60.3 60.3 266.5 8 29 186
6 356 47.7 117.5 66.7 66.7 292.0 12 29 216
8 419 55.6 133.4 76.2 76.2 349.0 12 32 270
10 508 63.5 152.4 85.7 115.1 432.0 16 85 324
12 559 66.7 155.6 92.1 111.1 489.0 20 35 381
14 603 69.9 165.1 93.7 117.5 527.0 20 38 413
16 686 76.2 177.8 106.4 127.0 603.0 20 41 470
18 743 82.6 184.2 117.6 139.7 654.0 20 45 533
20 813 88.9 190.5 127.0 165.1 724.0 24 45 584
24 940 101.6 203.2 139.7 184.2 838.0 24 51 692

 

Rating In Bars
TEMP C°
600#
  
-29 / 38
102.1
50
100.2
100
93.2
150
90.2
200
87.6
250
83.9
300
79.6
325
77.4
350
75.1
375
72.7
400
69.4
425
57.5
450
46
475
34.9
500
23.5
538
11.8

 

Rating of Stainless Steel Flanges

Flanges Pressure Rating in Bars ANSI flanges (ASTM A182 F304L / ASTM A182 F316L)

TEMP C°
600#
-29 TO 38
82.7
50
80
100
69.6
150
62.8
200
58.3
250
54.9
300
52.1
325
51
350
50.1
375
49.5
400
48.6
425
47.7
450
46.8

 

Free online 600 Lb Slip On Flange Dimensions, 30 Inch 600 Lb Flange Dimensions, 6 600 Lb Flange Dimensions

Find here Ansi 600 Lb Flange Dimensions, 600 Lb Pipe Flange Dimensions, 600 Lb Rf Flange Dimensions
Check 2 Inch 600 Lb Flange Dimensions, 600 Lb Ansi Flange Dimensions, 1 600 Lb Flange Dimensions