Stainless Steel Reducing Flange Manufacturer in India as per ASME/ ANSI B16.5

Check live Raised Face A105 Carbon steel Reducing Flange and Reducing Flange in Pn16 Dimensions

See Reducing Flange Awwa C207 Class D Weigh Chart, Copper Reducing Flange Supplier in Mumbai, View Price List of API 6A Reducing Flange in India

Reducing Flange Jis 16k is a device particularly designed to make two pipes fit together. A Reducing  Flange Jis 5k is used when there is a change in the diameter of both the pipes. There are different types of reducer flanges such as slip-on, blind, weld-neck and threaded flanges. These Reducing  Flange Din En 1092-1 are present in all types of pressure classes ( i.e. – ANSI classes 150, 300, 400, 600, 900, 1500 & 2500 and DIN PN6,  PN10,  PN16,  PN25,  PN40,  PN64,  PN100, PN160 ).

Carbon Steel Reducing Flange
Carbon Steel Reducing Flange
Stainless Steel Reducing Flange
Stainless Steel Reducing Flange
Alloy Steel Reducing Flange
Alloy Steel Reducing Flange

Reducing  Flange Jis 10k is the best alternatives to connect two different sized pipes together. Reducing Flange Manufacturers In India use various types of materials such as brass, bronze, cast iron,  and aluminium to make these flanges.

One of the benefits of using the Reducing  Flange Asme B16.5 Class 300 is that they are both durable as well as corrosion resistant in nature. Apart from playing a crucial role in connecting larger pipes to smaller ones, most suppliers prefer the using the Reducing  Flange Class 600 because they are a highly economical way to make transitions between two pipes of very different sizes. All the fore mentioned reasons make the Reducing  Flange Awwa C207 Class D very cost – efficient.

Some advantages of using a Reducing  Flange A105 have been highlighted below -

    •  Reducer flanges allows the buyer to connect two different pipe sizes (The bore or the opening of the run pipe could be safely reduced by either 1 or 2 sizes. If more than 2 size connection is required a solution based on the combination of a standard flange & butt weld reducer is required to be used.
    •  It is an easy and inexpensive method. Due to the durability of the Api 6A Reducing  Flange as well as its corrosion resistance ( dependent on the material used to produce the Reducing  Flange Asme B16.5 ), replacement will be less frequent.
    •  duplex stainless steel Reducing  flange can also be used to conserve water as the flange aids in reduction of fluids.
    •  Similar to the point above, while the alloy steel Reducing  flange can be resistant to acid, it is the material used in the end use will determine the resistance to acids, alkalis etc.

    With the above mentioned advantages, Reducing flange ansi b16. 5 is commonly used in applications involving ship building, oil field, off-shore and water system, power plants and in industrial vessels.

    As required by the buyer, a Stainless Steel Reducing  Flange Manufacturer can treat the surface of the Reducing flange 150 lbs with anti-rust oil or anti-rust paint. One of the reasons why the Pn16 Reducing  Flange tends to be resistant to corrosion is because the flange is surface treated with zinc by either electroplating or hot dipped galvanization. Since Zinc naturally tends to repel corrosive media, treating the surface of the carbon steel Reducing  flange  with zinc improves its anti-corrosion properties.

     

    Reducing Flange Price List

    Reducing Flange type
    Reducing Flange Price in India
    Reducing Flange Price in USD
    Reducing Flange Price in UAE Dirham
    Stainless Steel Reducing Flange
    INR 2876.42 / Kg
    USD $ 39.92 /Kg
    AED 147.98 UAE Dirham
    Carbon steel Reducing Flange
    INR 2140.05 / Kg
    USD $ 28.82 /Kg
    AED 100.88 UAE Dirham
    Alloy steel Reducing Flange
    INR 2842.42 / Kg
    USD $ 38.92 /Kg
    AED 130.98 UAE Dirham
    ANSI b16 5 Reducing Flange
    INR 2500.83 / Kg
    USD $ 30.74 /Kg
    AED 110.95 UAE Dirham
    ASME b16.47 Reducing Flange
    INR 2602.86 / Kg
    USD $ 28.12 /Kg
    AED 120.02 UAE Dirham

     

    What is Reducing Flange ?

    Reducing flange are a specialty flange that is most often used on projects that require the fitting together of different sized pipes. There are several types of reducing flanges including weld-neck reducing flanges, slip-on reducing flanges and threaded reducing flanges

     

    Reducing Flange Specifications

    Reducing Flange Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
    ASME B16.5 Reducing Flange Size Chart 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
    Reducing Flange Pressure Calculation in DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Reducing Flange
    Reducing Flange Pressure Rating ANSI Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Reducing Flange
    UNI 6Bar 10Bar 16Bar 25Bar 40Bar Reducing Flange
    JIS 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Reducing Flange
    Coating Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized Reducing Flange
    EN 6Bar 10Bar 16Bar 25Bar 40Bar Reducing Flange
    Test Certificates EN 10204/3.1B
    Raw Materials Certificate
    100% Radiography Test Report
    Third Party Inspection Report, etc
    Most common types of Reducing Flange Forged / Threaded / Screwed / Plate
    Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
    Production technique
    • Forged, Heat treated and machined
    Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
    Special design

    As per your drawing

    AS, ANSI, BS, DIN and JIS
    15 NB (1/2") to 200 NB (8")
    Equal and Reducing Configurations

    Origin Indian / West Europe / Japan / USA / Korean
    Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
    Reducing Flange Uses & application
    • Bitumen upgraders.
    • Heavy oil refineries.
    • Nuclear power (mostly seamless).
    • Petrochemicals and acids.
    Manufacturer of

    ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
    Reducing Flange: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

    • B.S: BS4504 , BS3293, BS1560, BS10
    • AS 2129: Table D; Table E; Table H
    • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
    • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
    • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
    • American standard (ANSI)
    • German (DIN)
    • British standard (BS)
    • DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 Reducing Flange
    • The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276
    Export to Saudi Arabia, Peru, Egypt, Indonesia, Brazil, Spain, USA, Canada, Ukraine, Singapore, Thailand, Oman, Ireland, Korea, Iran, India, Dubai
    Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

     

    Reducing Flange Dimensions/ JIS Reducing Flange Dimensions

    Reducing Flange Dimensions

     

    Reducing Flange Dimensions & Weight chart

     

    Reducing Flange Size Chart

    Nominal Size
    Type
    Ø A
    D
    Liner
    Thickness
    DN1
    DN2
    In.
    In.
     
    mm
    mm
    mm
    3/4"
    1/2"
    1
    98.5
    30
    5.0
    1"
    1/2"
    1
    108
    30
    5.0
    1"
    3/4"
    1
    108
    30
    5.0
    1.1/2"
    1/2"
    1
    127
    30
    5.0
    1.1/2"
    3/4"
    1
    127
    30
    5.0
    1.1/2"
    1"
    1
    127
    30
    5.0
    2"
    1/2"
    3
    152
    30
    5.0
    2"
    3/4"
    2
    152
    30
    5.0
    2"
    1"
    2
    152
    30
    5.0
    2"
    1.1/2"
    1
    152
    30
    5.0
    3"
    3/4"
    3
    190.5
    35
    5.0
    3"
    1"
    3
    190.5
    35
    5.0
    3"
    1.1/2"
    2
    190.5
    35
    5.0
    3"
    2"
    1
    190.5
    35
    5.0
    4"
    3/4"
    3
    228.6
    35
    5.0
    4"
    1"
    3
    228.6
    35
    5.0
    4"
    1.1/2"
    3
    228.6
    35
    5.0
    4"
    2"
    3
    228.6
    35
    5.0
    4"
    3"
    2
    228.6
    35
    5.0
    6"
    3/4"
    3
    280
    40
    5.0
    6"
    1"
    3
    280
    40
    5.0
    6"
    1.1/2"
    3
    280
    40
    5.0
    6"
    2"
    3
    280
    40
    5.0
    6"
    3"
    3
    280
    40
    5.0
    6"
    4"
    2
    280
    40
    5.0
    8"
    1"
    3
    343
    35
    5.0
    8"
    1.1/2"
    3
    343
    35
    5.0
    8"
    2"
    3
    343
    40
    5.0
    8"
    3"
    3
    343
    40
    5.0
    8"
    4"
    3
    343
    40
    5.0
    8"
    6"
    2
    343
    40
    5.0
    10"
    1"
    3
    406
    35
    2.5
    10"
    1.1/2"
    3
    406
    35
    2.5
    10"
    2"
    3
    406
    35
    2.5
    10"
    3"
    3
    406
    35
    2.5
    10"
    4"
    3
    406
    35
    2.5
    10"
    6"
    3
    406
    35
    2.5
    10"
    8"
    2
    406
    35
    3.5
    12"
    1"
    3
    483
    35 
    3.5
    12"
    1.1/2"
    3
    483
    35 
    3.5
    12"
    2"
    3
    483
    35 
    3.5
    12"
    3"
    3
    483
    35 
    3.5
    12"
    4"
    3
    483
    35 
    3.5
    12"
    6"
    3
    483
    35 
    3.5
    12"
    8"
    3
    483
    35 
    3.5
    12"
    10"
    2
    483
    35 
    3.5
    14"
    12"
    1
    533
    40
    3.5
    16"
    12"
    3
    597
    40
    3.5
     
    16"
    14"
    2
    597
    35
    3.5

     

    Reducing Flange Pressure Ratings

    Flanges pressure rating in psig for Reducing Flange ASME
    Temperature (F°)
    150#
    300#
    400#
    600#
    900#
    1500#
    2500#
    -20 to 100
    285
    740
    985
    1480
    2220
    3705
    6170
    200
    260
    680
    905
    1360
    2035
    3395
    5655
    300
    230
    655
    870
    1310
    1965
    3270
    5450
    400
    200
    635
    845
    1265
    1900
    3170
    5280
    500
    170
    605
    805
    1205
    1810
    3015
    5025
    600
    140
    570
    755
    1135
    1705
    2840
    4730
    650
    125
    550
    730
    1100
    1650
    2745
    4575
    700
    110
    530
    710
    1060
    1590
    2655
    4425
    750
    95
    505
    675
    1015
    1520
    2535
    4230
    800
    80
    410
    550
    825
    1235
    2055
    3430
    850
    65
    320
    425
    640
    955
    1595
    2655
    900
    50
    230
    305
    460
    690
    1150
    1915
    950
    35
    135
    185
    275
    410
    685
    1145
    1000
    20
    85
    115
    170
    255
    430
    715

     

    Types of Reducing Flanges

    Reducing Flange Class 300
    Reducing Flanges EN 1092-1
    ASME B16.47 Reducing Flanges
    Reducing Flanges ANSI B16.5
    Reducing Flange SORF
    Reducing Neck flange
    Reducing Flange class 300
    Reducing Flange SORF
    Galavanised Reducing Flange
    Weld neck Reducing flange 
    3 x 2  Reducing Flange
    ANSI 150 Reducing Flange
    ANSI B16.5 Reducing Flanges
    High QualityReducing Flanges
    JIS Redcuing Flange
    Slip On Reducing Flange
    ANSI B16.5 class 150 Loose Flange
    Reducing Flange Dimensions
    Reducing flange High Temperature
    4 x 3 Reducing Flange 
    36 Inch Lap joint flange
    2 x 1 Reducing flange
    ASME B16.47 Reducing Flange
    ANSI B16.5 Class 150 Reducing Flanges
    Reducing Flange DIN
    Eccentric Reducing Flange
    Reducing Hub Flange
    6 x 3 Reducing flange
    Reducing flange
    Reducing Flange
    ASME B16.5 Reducing Flanges
    Socket Weld Reducing flange
    Reducing Lap Joint Flange
    Reducing Flange NPT

     

    ASTM Specification of Reducing Flange

    •  Alloy Steel High-Temp Reducing Flange
      •      A182 Gr F1 Reducing Flange
      •      A182 Gr F11 Reducing Flange
      •      A182 Gr F12 Reducing Flange
      •      A182 Gr F22 Reducing Flange
      •      A182 Gr F5 Reducing Flange
      •      A182 Gr F9 Reducing Flange
    •  Alloy Steel Low-Temp Reducing Flange
      •      A350 Gr LF2 Reducing Flange
      •      A350 Gr LF3 Reducing Flange
    •  Austenitic Stainless Steel Reducing Flange
      •      A182 Gr F304 Reducing Flange
      •      A182 Gr F316 Reducing Flange
      •      A182 Gr F321 Reducing Flange
      •      A182 Gr F347 Reducing Flange
      •      A182 Gr F304L Reducing Flange
      •      A182 Gr F316L Reducing Flange
      •      A182 Gr F317 Reducing Flange
      •      A182 Gr F317L Reducing Flange
      •      A182 Gr F321 Reducing Flange
      •      A182 Gr F310 Reducing Flange
      •      A182 Gr 347 Reducing Flange
    •  Nickel Alloy Reducing Flange
      •      ASTM B564 Reducing Flange
      •      astm b564 uns n06600 Reducing Flange
      •      astm b564 uns n06625 Reducing Flange
      •      astm b564 uns no4400 Reducing Flange
      •      astm b564 uns n08810 Reducing Flange
      •      astm b564 uns n08811 Reducing Flange
      •      astm b564 uns n08825 Reducing Flange
      •      astm b564 uns n04400 Reducing Flange
      •      astm b564 uns n10276 Reducing Flange
      •      astm b564 uns n10665 Reducing Flange
    •  Titanium Reducing Flange
      •      astm b381 grade f2 Reducing Flange
      •      astm b381 f5 Reducing Flange
      •      astm b381 f3 Reducing Flange
      •      astm b381 f12 Reducing Flange
      •      astm b381 f7 Reducing Flange
      •      Other grades: ASTM B381 F1, F2, F2H, F3, F4, F5, F6, F7,   F7H, F9, F10, F11, F12, F13, F14, F15, F16, F16H, F17, F18,   F19, F20, F21, F23, F24, F25, F26 , F26H, F27, F28, F29, F30,   F31, F32, F33, F34, F35, F36, F37, F38 Reducing Flange
      •  Carbon Steel Reducing Flange
        •      A105 Reducing Flange

     

    Check Sizes of Reducing Flange Din En 1092-1 also Check Price of Reducing Flange Asme B16.5 Class 150, Class 300 and Class 600

    Type of Reducing Flange we produce

    Reducing Flange Class 900
    Reducing Flange Flat Face
    Reducing Flange Pn16
    Kf Reducing Flange
    Reducing Flange Class 2500
    Reducing Flange Slip On
    Reducing Flange Din 2527
    Reducing Flange Weight 150# 
    Reducing Flange Din 2576
    Reducing Flange With 1/2 Npt
    Reducing Flange Pn 64
    Reducing Flange Ansi B16.5 150
    Reducing Flange Class 150
    Reducing Flange Threaded
    Reducing Flange Pn10
    Reducing Flange B16.47
    Reducing Flange Pn40
    Reducing Flange Rtj 900
    Reducing Flange Pn 160
    Reducing Flange Rtj
    Reducing Flange Class 1500
    Reducing Flange Npt
    Reducing Flange Dn150 Pn16
    Reducing Flange Jis 5k
    Reducing Flange Class 600
    Reducing Flange Jis B2220
    Reducing Flange Asme B16.5 Class 300
    Reducing Flange Ring Type Joint
    Reducing Flange Din 2633
    Reducing Flange Rtj 1500
    Reducing Flange Class 300
    Reducing Flange With Threaded Hole
    Reducing Flange Din En 1092-1
    Reducing Flange Jis 10k

     

    Reducing Flange Material

    Stainless Steel Reducing Flange ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409
    Carbon Steel Reducing Flange ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80)
    Titanium Reducing Flange ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7
    ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5
    Alloy Steel Reducing Flange ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91
    Copper Nickel Reducing Flange ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640
    Copper Reducing Flange T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
    Inconel Reducing Flange ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 Reducing Flange
    Brass Reducing Flange 3602 / 2604 / H59 / H62 / etc.
    Monel Reducing Flange ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)
    Hastelloy Reducing Flange ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges
    Aluminium Reducing Flange 5052 /6061/ 6063 / 2017 / 7075 / etc.
    Alloy 20 Reducing Flange ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3
    Duplex Reducing Flange S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
    Nickel Reducing Flange ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC
    Incoloy Reducing Flange ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges
    Super Duplex Reducing Flange S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
    Other Reducing Flange material Tin bronze, Alumunum bronze, Lead bronze
    Nimonic Reducing Flange Nimonic 75, Nimonic 80A, Nimonic 90
    254 Smo Reducing Flange ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547

     

    We maintain Stock of

    •  Reducing Flange Hdpe
    •  Slip Reducing Flange
    •  Reducing Flange Plumbing
    •  Api Reducing Flange
    •  Asme Reducing Flange
    •  Aluminum Reducing Flange
    •  Reducing Flange Asme B16.5
    •  Reducing Flange Hub
    •  Reducing Flange With Tap
    •  Harga Reducing Flange Jis 10k
    •  Jual Reducing Flange
    •  Reducing Flange With Hole
    •  Reducing Flange Water Main
    •  Grayloc Reducing Flange
    •  Reducing Flange With Drain
    •  Reducing Flange With Hub
    •  Api 6a Reducing Flange
    •  Ansi 600 Reducing Flange
    •  Tapped Reducing Flange
    •  Reducing Flange Vessel
    •  Reducing Orifice Flange
    •  Reducing Flange Slip On
    •  A105 Reducing Flange
    •  Reducing Flange Reducing
    •  Reducing Flange Pipe
    •   Pn16 Reducing Flange
    •  Reducing Flange Reducing
    •  Reducing Reducing Flange
    •  Reducing Flange Rtj
    •  Awwa C207 Class D Reducing Flange
    •  Reducing Flange Asme
    •  Reducing Flange Need Gasket
    •  B16.5 Reducing Flange
    •  Reducing Flange Bolts
    •  Reducing Flange With Npt Thread
    •  Reducing flange 150 lbs
    •  Reducing flange 300 lbs
    •  Reducing flange 600 lbs
    •  Brass Reducing Flange
    •  alloy steel Reducing flange
    •  Reducing Flange Jis 16k
    •  Reducing flange threaded
    •   En 1092-1 Reducing Flange
    •  Reducing Flange En 1092
    •  Victaulic Reducing Flange
    •  Reducing Flange End Connection
    •  Din En 1092-1 Reducing Flange
    •  Reducing Flange Face
    •  Class 150 Reducing Flange
    •  Reducing Flange Cap
    •  Carbon Steel Reducing Flange
    •  Reducing Flange Class 300
    •  Class 600 Reducing Flange
    •  Reducing Flange Drilled And Tapped
    •  B16.47 Reducing Flange
    •  Reducing Flange Brass
    •  Paddle Reducing Flange
    •  Reducing Flange With Bleed Valve
    •  Series B Reducing Flange
    •  Reducing Flange Asme B16.5 Class 300
    •  Kf Reducing Flange
    •  Reducing Flange Lifting Device
    •  Lifting Lug Reducing Flange
    •  Reducing Flange Lockout
    •  Reducing Flange Npt
    •  Rtj 900 Reducing Flange
    •  Reducing Flange Nozzle
    •  Tapped Reducing Flange
    •  Reducing Flange Nps
    •  Rtj 1500 Reducing Flange
    •  Reducing Flange Need Gasket
    •  Reducing Flange With Npt Tap
    •  Rtj 2500 Reducing Flange
    •  Reducing Flange With Npt Hole
    •  Reducing Reducing Flange
    •  Reducing Flange Od Chart
    •  Reducing Flange On P&Id
    •  Blind Kidney Flange
    •  copper nickel Reducing flange
    •  duplex stainless steel Reducing flange
    •  inconel Reducing flange
    •  hastelloy Reducing flange
    •  monel Reducing flange
    •  Reducing Flange Groove
    •  Reducing Flange Jis 5k

     

    View Reducing Flange Jis 10k Pressure Rating and 8 Aluminum Reducing flange Weight, Stocking Distributors of Super Duplex, Titanium and Nickel Alloy Reducing Flanges in India.
    View ASME 16.48 spectacle Reducing dimensions, Weight of Tapped Reducing Flange, Paddle Reducing Flange and Victaulic Reducing Flange