In the Tongue & Groove Flange Asme B16.5 Class 300, both the Tongue face as well as the Groove faces of must be matched to each other. One of the flange faces has been produced with a raised ring also referred to as Tongue, machined onto the flange face by the Stainless Steel Tongue & Groove Flange Manufacturer. Similarly, the mating flange has a matching depression also known as a Groove has been machined into its face by the Tongue & Groove Flange Manufacturers In India .
Table of Content
Tongue & Groove Flange Jis 16k facings have been standardized in both large and small types. The Tongue & Groove Flange Din En 1092-1 are different from male and female flanges in terms of the inside diameters. To elaborate, the inside diameters of the Tongue & Groove Flange Awwa C207 Class D do not extend into the flange base, thus the gasket has been retained on its inner and outer diameter. The Tongue & Groove Flange Jis 5k are commonly found on pump covers and Valve Bonnets.
Tongue & Groove Flange Asme B16.5 joints also have an added advantage i.e. they are self-aligning and have a tendancy to act as a reservoir for the adhesive. The scarf joint in the Tongue & Groove Flange Jis 10k keeps the axis of loading in line or aligned with the joint. Hence, the Tongue & Groove Flange Class 600 does not require any major machining operation.
Usually general flange faces such as the Ring Type Joint Flanges, Tongue & Groove Flange A105 and the Male & Female Flanges must never be bolted together. The reason for this is that the contact surfaces do not match each other. And there is no gasket that has one type of flange face on one side with another type on the other side. For e.g. a Api 6A Tongue & Groove Flange cannot be used with a Ring Type Joint Flanges as the faces of both the flanges are different.
Pn16 Tongue & Groove Flange can be produced from different materials. In fact the material used to manufacture the Tongue & Groove flange ansi b16. 5 will determine its physical and mechanical properties as well as its corrosion resistance. For instance, one can expect the duplex stainless steel Tongue & Groove flange to have excellent resistance to corrosion and perform well in harsh and extreme temperature environments, where carbon steel flange and alloy steel Tongue & Groove flange may give an average performance.
Another aspect used to select the Tongue & Groove flange 150 lbs is the end use or applications. For instance, if the flange is to be used in an environment that has application in an ambient temperature and there is a presence of mild corrosive compounds, a carbon steel Tongue & Groove flange could be used in this case.
Tongue & Groove Flanges type |
Tongue & Groove Flanges Price in India |
Tongue & Groove Flanges Price in USD |
Tongue & Groove Flanges Price in UAE Dirham |
---|---|---|---|
stainless steel Groove & Tongue flanges class 150 |
INR 1548.38 / Kg |
USD $12.45 / Kg |
AED 72.49 UAE Dirham |
Groove and Tongue Flange |
INR 6962.79 / Kg |
USD $90.45 / Kg |
AED 359.08 UAE Dirham |
carbon steel Groove & Tongue flanges class 300 |
INR 6100.90 / Kg |
USD $78.12 /Kg |
AED 313.78 UAE Dirham |
Small Tongue and Groove Flange |
INR 8320.58 / Kg |
USD $100.14 /Kg |
AED 431.43 UAE Dirham |
Large Tongue and Groove Flange |
INR 7646.53 / Kg |
USD $100.35 /Kg |
AED 400.27 UAE Dirham |
Groove & Tongue flanges ansi b16 5 class 150 |
INR 5235.04 / Kg |
USD $65.56 /Kg |
AED 267.63 UAE Dirham |
Tongue and Groove Flange is similar to a slip-on flange in outline, but the bore is Groove & Tongue, thus enabling assembly without welding. This threads are tapered in order to create a seal between the Groove & Tongue flange and the pipe as the tapers approach the same diameter. The Tongue and Groove are referred to as either Groove & Tongue or Tongue.
Tongue And Groove Flange Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
---|---|
ASME B16.5 Tongue And Groove Flange Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
Tongue And Groove Flange Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Tongue And Groove Flange |
Tongue And Groove Flange Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Tongue And Groove Flange |
UNI | 6Bar 10Bar 16Bar 25Bar 40Bar Tongue And Groove Flange |
JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Tongue And Groove Flange |
Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized Tongue And Groove Flange |
EN | 6Bar 10Bar 16Bar 25Bar 40Bar Tongue And Groove Flange |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Most common types of Tongue And Groove Flange | Forged / Threaded / Screwed / Plate |
Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
Production technique |
|
Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
Special design | As per your drawing AS, ANSI, BS, DIN and JIS |
Origin | Indian / West Europe / Japan / USA / Korean |
Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
Tongue And Groove Flange Uses & application |
|
Manufacturer of | ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
|
Export to | Saudi Arabia, Peru, Egypt, Indonesia, Brazil, Spain, USA, Canada, Ukraine, Singapore, Thailand, Oman, Ireland, Korea, Iran, India, Dubai |
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
DN |
d1 |
d2 |
d3 |
d4 |
d5 |
d6 |
d7 |
d8 |
f1 |
f2 |
½" |
1,38 (35,1) |
1,44 (36,6) |
1,38 (35,1) |
1,44 (36,6) |
1,00 (25,4) |
0,94 (23,9) |
1,81 (46,0) |
1,75 (44,5) |
0,25 (6,4) |
0,19 (4,8) |
¾" |
1,69 (42,9) |
1,75 (44,5) |
1,69 (42,9) |
1,75 (44,5) |
1,31 (33,3) |
1,25 (31,8) |
2,12 (53,8) |
2,06 (52,3) |
0,25 (6,4) |
0,19 (4,8) |
1" |
2,00 (50,8) |
2,06 (52,3) |
1,88 (47,7) |
1,94 (49,3) |
1,50 (38,1) |
1,44 (36,6) |
2,44 (62,0) |
2,25 (57,2) |
0,25 (6,4) |
0,19 (4,8) |
1¼" |
2,50 (63,5) |
2,56 (65,0) |
2,25 (57,2) |
2,31 (58,7) |
1,88 (47,8) |
1,81 (46,0) |
2,94 (74,7) |
2,62 (66,6) |
0,25 (6,4) |
0,19 (4,8) |
1½" |
2,88 (73,2) |
2,94 (74,7) |
2,50 (63,5) |
2,56 (65,0) |
2,12 (53,8) |
2,06 (52,3) |
3,31 (84,1) |
2,88 (73,2) |
0,25 (6,4) |
0,19 (4,8) |
2" |
3,62 (92,0) |
3,69 (93,7) |
3,25 (82,6) |
3,31 (84,1) |
2,88 (73,0) |
2,81 (71,4) |
4,06 (103,1) |
3,62 (92,0) |
0,25 (6,4) |
0,19 (4,8) |
2½" |
4,12 (104,6) |
4,19 (106,4) |
3,75 (95,2) |
3,81 (96,8) |
3,38 (85,8) |
3,31 (84,1) |
4,56 (115,8) |
4,12 (104,6) |
0,25 (6,4) |
0,19 (4,8) |
3" |
5,00 (127,0) |
5,06 (128,5) |
4,62 (117,5) |
4,69 (119,1) |
4,25 (108,0) |
4,19 (106,4) |
5,44 (138,2) |
5,00 (127,0) |
0,25 (6,4) |
0,19 (4,8) |
4" |
6,19 (157,2) |
6,25 (158,8) |
5,69 (144,5) |
5,75 (146,1) |
5,19 (131,8) |
5,12 (130,0) |
6,62 (168,1) |
6,19 (157,2) |
0,25 (6,4) |
0,19 (4,8) |
5" |
7,31 (185,7) |
7,38 (187,5) |
6,81 (173,0) |
6,88 (174,8) |
6,31 (160,3) |
6,25 (158,8) |
7,75 (196,9) |
7,31 (185,7) |
0,25 (6,4) |
0,19 (4,8) |
6" |
8,50 (215,9) |
8,56 (217,5) |
8,00 (203,2) |
8,06 (204,7) |
7,50 (190,5) |
7,44 (189,0) |
8,94 (227,0) |
8,50 (215,9) |
0,25 (6,4) |
0,19 (4,8) |
8" |
10,62 (269,8) |
10,69 (271,5) |
10,00 (254,0) |
10,06 (255,5) |
9,38 (238,3) |
9,31 (236,5) |
11,06 (281,0) |
10,62 (269,8) |
0,25 (6,4) |
0,19 (4,8) |
10" |
12,75 (323,5) |
12,81 (325,4) |
12,00 (304,8) |
12,06 (306,3) |
11,25 (285,8) |
11,19 (284,2) |
13,19 (335,0) |
12,75 (323,5) |
0,25 (6,4) |
0,19 (4,8) |
12" |
15,00 (381,0) |
15,06 (382,5) |
14,25 (362,0) |
14,31 (363,5) |
13,50 (342,9) |
13,44 (341,4) |
15,44 (392,2) |
15,00 (381,0) |
0,25 (6,4) |
0,19 (4,8) |
14" |
16,25 (412,8) |
16,31 (414,3) |
15,50 (393,7) |
15,56 (395,2) |
14,75 (374,7) |
14,69 (373,1) |
16,69 (423,9) |
16,25 (412,8) |
0,25 (6,4) |
0,19 (4,8) |
16" |
18,50 (469,9) |
18,56 (471,5) |
17,62 (447,6) |
17,69 (449,3) |
16,75 (425,5) |
16,69 (423,9) |
18,94 (481,0) |
18,50 (469,9) |
0,25 (6,4) |
0,19 (4,8) |
18" |
21,00 (533,4) |
21,06 (535,0) |
20,12 (511,0) |
20,19 (512,8) |
19,25 (489,0) |
19,19 (487,4) |
21,44 (544,6) |
21,00 (533,4) |
0,25 (6,4) |
0,19 (4,8) |
20" |
23,00 (584,2) |
23,06 (585,8) |
22,00 (558,8) |
22,06 (560,3) |
21,00 (533,4) |
20,94 (531,9) |
23,44 (595,4) |
23,00 (584,2) |
0,25 (6,4) |
0,19 (4,8) |
24" |
27,25 (692,2) |
27,31 (693,7) |
26,25 (666,8) |
26,31 (668,3) |
25,25 (641,4) |
25,19 (639,8) |
27,69 (703,3) |
27,25 (692,2) |
0,25 (6,4) |
0,19 (4,8) |
Nominal |
Large Tongue |
Large Tongue |
Gasket |
Number |
Size of |
Bolt Torque |
Comp Force |
Max. Gasket |
Internal |
Min. Rec’d |
Min. Rec’d |
Max. Rec’d/Avail. |
Preferred |
Pipe Size |
Contact I.D. |
Contact O.D. |
Contact Area |
Of |
Bolts |
at 60ksi Stress |
Per Bolt @ 60ksi |
Stress Avail. |
Pressure |
Gasket Stress |
Torque/Bolt |
Gasket Stress |
Torque/Bolt |
(in) |
(in) |
(in) |
(sq.in.) |
Bolts |
(in) |
(ft.lbs.) |
(psi) |
(psi) |
(psig) |
(psi) |
(ft.lbs.) |
(psi) |
(ft.lbs.) |
0.5 |
1.00 |
1.38 |
0.71 |
4 |
0.50 |
60 |
7560 |
42594 |
<300 |
4800 |
7 |
10000 |
14 |
0.75 |
1.31 |
1.69 |
0.89 |
4 |
0.50 |
60 |
7560 |
33791 |
<300 |
4800 |
9 |
10000 |
18 |
1 |
1.50 |
2.00 |
1.37 |
4 |
0.50 |
60 |
7560 |
22013 |
<300 |
4800 |
13 |
10000 |
27 |
1.25 |
1.88 |
2.50 |
2.13 |
4 |
0.50 |
60 |
7560 |
14186 |
<300 |
4800 |
20 |
10000 |
42 |
1.5 |
2.12 |
2.88 |
2.98 |
4 |
0.50 |
60 |
7560 |
10137 |
<300 |
4800 |
28 |
10000 |
59 |
2 |
2.88 |
3.62 |
3.78 |
4 |
0.63 |
120 |
12120 |
12839 |
<300 |
4800 |
45 |
10000 |
93 |
2.5 |
3.38 |
4.12 |
4.36 |
4 |
0.63 |
120 |
12120 |
11128 |
<300 |
4800 |
52 |
10000 |
108 |
3 |
4.25 |
5.00 |
5.45 |
4 |
0.63 |
120 |
12120 |
8902 |
<300 |
4800 |
65 |
8902 |
120 |
3.5 |
4.75 |
5.50 |
6.03 |
8 |
0.63 |
120 |
12120 |
16067 |
<300 |
4800 |
36 |
10000 |
75 |
4 |
5.19 |
6.19 |
8.93 |
8 |
0.63 |
120 |
12120 |
10854 |
<300 |
4800 |
53 |
10854 |
120 |
5 |
6.31 |
7.31 |
10.69 |
8 |
0.75 |
200 |
18120 |
13558 |
<300 |
4800 |
71 |
13558 |
200 |
6 |
7.50 |
8.50 |
12.56 |
8 |
0.75 |
200 |
18120 |
11541 |
<300 |
4800 |
83 |
11541 |
200 |
8 |
9.38 |
10.62 |
19.47 |
8 |
0.75 |
200 |
18120 |
7446 |
<300 |
4800 |
129 |
7446 |
200 |
10 |
11.25 |
12.75 |
28.26 |
12 |
0.88 |
320 |
25140 |
10675 |
<300 |
4800 |
144 |
10675 |
320 |
12 |
13.50 |
15.00 |
33.56 |
12 |
0.88 |
320 |
25140 |
8990 |
<300 |
4800 |
171 |
8990 |
320 |
14 |
14.75 |
16.25 |
36.50 |
12 |
1.00 |
490 |
33060 |
10868 |
<300 |
4800 |
216 |
10868 |
490 |
16 |
16.75 |
18.50 |
48.42 |
16 |
1.00 |
490 |
33060 |
10923 |
<300 |
4800 |
215 |
10923 |
490 |
18 |
19.25 |
21.00 |
55.29 |
16 |
1.13 |
710 |
43680 |
12639 |
<300 |
4800 |
270 |
12639 |
710 |
20 |
21.00 |
23.00 |
69.08 |
20 |
1.13 |
710 |
43680 |
12646 |
<300 |
4800 |
269 |
12646 |
710 |
24 |
25.25 |
27.25 |
82.43 |
20 |
1.25 |
1000 |
55740 |
13525 |
<300 |
4800 |
355 |
13525 |
1000 |
Nominal |
Large Tongue |
Large Tongue |
Gasket |
Number |
Size of |
Bolt Torque |
Comp Force |
Max. Gasket |
Internal |
Min. Rec’d |
Min. Rec’d |
Max. Rec’d/Avail. |
Preferred |
Pipe Size |
Contact I.D. |
Contact O.D. |
Contact Area |
Of |
Bolts |
at 60ksi Stress |
Per Bolt @ 60ksi |
Stress Avail. |
Pressure |
Gasket Stress |
Torque/Bolt |
Gasket Stress |
Torque/Bolt |
(in) |
(in) |
(in) |
(sq.in.) |
Bolts |
(in) |
(ft.lbs.) |
(psi) |
(psi) |
(psig) |
(psi) |
(ft.lbs.) |
(psi) |
(ft.lbs.) |
0.5 |
1.00 |
1.38 |
0.71 |
4 |
0.50 |
60 |
7560 |
42594 |
<800 |
6200 |
12 |
10000 |
14 |
0.75 |
1.31 |
1.69 |
0.89 |
4 |
0.63 |
120 |
12120 |
54174 |
<800 |
6200 |
21 |
10000 |
22 |
1 |
1.50 |
2.00 |
1.37 |
4 |
0.63 |
120 |
12120 |
35290 |
<800 |
6400 |
28 |
10000 |
34 |
1.25 |
1.88 |
2.50 |
2.13 |
4 |
0.63 |
120 |
12120 |
22742 |
<800 |
6400 |
43 |
10000 |
53 |
1.5 |
2.12 |
2.88 |
2.98 |
4 |
0.75 |
200 |
18120 |
24298 |
<800 |
6400 |
64 |
10000 |
82 |
2 |
2.88 |
3.62 |
3.78 |
8 |
0.63 |
120 |
12120 |
25679 |
<800 |
6400 |
46 |
10000 |
47 |
2.5 |
3.38 |
4.12 |
4.36 |
8 |
0.75 |
200 |
18120 |
33273 |
<800 |
6400 |
60 |
10000 |
60 |
3 |
4.25 |
5.00 |
5.45 |
8 |
0.75 |
200 |
18120 |
26618 |
<800 |
6400 |
88 |
10000 |
75 |
3.5 |
4.75 |
5.50 |
6.03 |
8 |
0.75 |
200 |
18120 |
24021 |
<800 |
6400 |
99 |
10000 |
83 |
4 |
5.19 |
6.19 |
8.93 |
8 |
0.75 |
200 |
18120 |
16227 |
<800 |
6400 |
125 |
10000 |
123 |
5 |
6.31 |
7.31 |
10.69 |
8 |
0.75 |
200 |
18120 |
13558 |
<800 |
6400 |
156 |
10000 |
148 |
6 |
7.50 |
8.50 |
12.56 |
12 |
0.75 |
200 |
18120 |
17312 |
<800 |
6400 |
131 |
10000 |
116 |
8 |
9.38 |
10.62 |
19.47 |
12 |
0.88 |
320 |
25140 |
15496 |
<800 |
6400 |
205 |
10000 |
207 |
10 |
11.25 |
12.75 |
28.26 |
16 |
1.00 |
490 |
33060 |
18718 |
<800 |
6400 |
219 |
10000 |
262 |
12 |
13.50 |
15.00 |
33.56 |
16 |
1.13 |
710 |
43680 |
20826 |
<800 |
6400 |
319 |
15000 |
511 |
14 |
14.75 |
16.25 |
36.50 |
20 |
1.13 |
710 |
43680 |
23933 |
<800 |
6600 |
287 |
15000 |
445 |
16 |
16.75 |
18.50 |
48.42 |
20 |
1.25 |
1000 |
55740 |
23021 |
<800 |
6600 |
401 |
15000 |
652 |
18 |
19.25 |
21.00 |
55.29 |
24 |
1.25 |
1000 |
55740 |
24194 |
<800 |
6400 |
439 |
15000 |
620 |
20 |
21.00 |
23.00 |
69.08 |
24 |
1.25 |
1000 |
55740 |
19365 |
<800 |
6400 |
484 |
15000 |
775 |
24 |
25.25 |
27.25 |
82.43 |
24 |
1.50 |
1600 |
84300 |
24546 |
<800 |
6400 |
662 |
15000 |
978 |
|
|
Tongue And Groove Flange Class 900 |
Tongue And Groove Flange Flat Face |
Tongue And Groove Flange Pn16 |
Kf Tongue And Groove Flange |
Tongue And Groove Flange Class 2500 |
Tongue And Groove Flange Slip On |
Tongue And Groove Flange Din 2527 |
Tongue And Groove Flange Weight 150# |
Tongue And Groove Flange Din 2576 |
Tongue And Groove Flange With 1/2 Npt
|
Tongue And Groove Flange Pn 64 |
Tongue And Groove Flange Ansi B16.5 150 |
Tongue And Groove Flange Class 150 |
Tongue And Groove Flange Threaded |
Tongue And Groove Flange Pn10 |
Tongue And Groove Flange B16.47 |
Tongue And Groove Flange Pn40 |
Tongue And Groove Flange Rtj 900 |
Tongue And Groove Flange Pn 160 |
Tongue And Groove Flange Rtj |
Tongue And Groove Flange Class 1500 |
Tongue And Groove Flange Npt |
Tongue And Groove Flange Dn150 Pn16 |
Tongue And Groove Flange Jis 5k |
Tongue And Groove Flange Class 600 |
Tongue And Groove Flange Jis B2220 |
Tongue And Groove Flange Asme B16.5 Class 300 |
Tongue And Groove Flange Ring Type Joint |
Tongue And Groove Flange Din 2633 |
Tongue And Groove Flange Rtj 1500 |
Tongue And Groove Flange Class 300 |
Tongue And Groove Flange With Threaded Hole |
Tongue And Groove Flange Din En 1092-1 |
Tongue And Groove Flange Jis 10k |
ANSI B16.5 class 150 Tongue & Groove Flange Stockholder |
Small Tongue & Groove Flanges |
ANSI Tongue & Groove Flange |
Tongue & Groove Weld Neck Flanges |
Groove & Tongue Flange Dimensions |
ANSI B16.5 Class 150 Tongue & Groove Flanges |
Long Tongue & Groove Flanges |
Groove & Tongue Flanges |
Carbon Steel Groove & Tongue Flange |
High Quality Tongue & Groove Flanges |
ASME B16.47 Series A and B Tongue & Groove Flanges |
ANSI 150 Tongue & Groove Flange |
ASME B16.5 Tongue & Groove Flanges |
ASME B16.47 Series A and B Tongue & Groove Flanges |
Tongue & Groove Slip On Flange |
Small Tongue & Groove Flange |
ANSI B16.5 Tongue & Groove Flanges |
Tongue & Groove Pipe Flanges |
Stainless Steel Tongue & Groove Flanges |
Tongue & Groove Flange Dimensions |
Tongue & Groove Flange |
SS Groove & Tongue Flange |
Stainless Steel Tongue And Groove Flange | ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
Carbon Steel Tongue And Groove Flange | ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
Titanium Tongue And Groove Flange | ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
Alloy Steel Tongue And Groove Flange | ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91 |
Copper Nickel Tongue And Groove Flange | ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
Copper Tongue And Groove Flange | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
Inconel Tongue And Groove Flange | ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 Tongue And Groove Flange |
Brass Tongue And Groove Flange | 3602 / 2604 / H59 / H62 / etc. |
Monel Tongue And Groove Flange | ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
Hastelloy Tongue And Groove Flange | ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges |
Aluminium Tongue And Groove Flange | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
Alloy 20 Tongue And Groove Flange | ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
Duplex Tongue And Groove Flange | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Nickel Tongue And Groove Flange | ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
Incoloy Tongue And Groove Flange | ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges |
Super Duplex Tongue And Groove Flange | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Other Tongue And Groove Flange material | Tin bronze, Alumunum bronze, Lead bronze |
Nimonic Tongue And Groove Flange | Nimonic 75, Nimonic 80A, Nimonic 90 |
254 Smo Tongue And Groove Flange | ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |
We offer ASME B16.5 Groove and Tongue Flanges through a worldwide network. These Tongue & Groove Flange is use in various industrial applications like :
|
|