Lap Joint Flange Jis 16k slide directly over the pipe and are usually used in combination with stub end fittings. A pipe is welded to the Stub End fitting, while the Lap Joint Flange Jis 5k is free to rotate around the stub end. The benefit of the Lap Joint Flange Jis 10k, is that there will not be any issues with regards to the bolt hole alignment.
Table of Content
Although Lap Joint Flange Awwa C207 Class D has all the common dimensions similar to any other flange, the Lap Joint Flange Class 600, however does not have a raised face, as used in conjunction with a Lap Joint Stub End. Lap Joint Flange Din En 1092-1 is nearly identical to a Slip On flange with the exception of the presence of a radius at the intersection of the flange face and the bore, which accommodates the flanged portion of the Stub End.
The pressure-holding ability of the Lap Joint Flange A105 is slightly, if any, better as compared to Slip On flanges. And the fatigue life for the Lap Joint Flange Asme B16.5 assembly is only one tenth that of Welding Neck flanges.The Lap Joint Flange Asme B16.5 Class 300 could be used in all pressures rating environments. Loose flange is available in a full size range. Since the alloy steel Lap Joint flange tends to slip over the pipe, they are not welded or otherwise fastened to it. Bolting pressure is transmitted to the gasket from the pressure received by the carbon steel Lap Joint flange against the back of the pipe lap or Stub End.
Duplex stainless steel Lap Joint flange come with the following special advantages:
Since, the Pn16 Lap Joint Flange are made from duplex grade stainless, they tend to have excellent mechanical properties like high tensile strength, good toughness, good hardness as well as good resistance to corrosion.
Manifold Pipe Solution Inc. is one of the leading distributors and Lap Joint Flange Manufacturers In India.
Lap Joint Flanges type |
Lap Joint Flanges Price in India |
Lap Joint Flanges Price in USD |
Lap Joint Flanges Price in UAE Dirham |
---|---|---|---|
Stainless Steel Lap Joint Flanges |
INR 4507.79 / Kg |
USD $ 46.42 /Kg |
AED 233.98 UAE Dirham |
Carbon steel Lap Joint Flanges |
INR 3000.90 / Kg |
USD $ 34.56 /Kg |
AED 153.68 UAE Dirham |
Alloy steel Lap Joint Flanges |
INR 2688.24 / Kg |
USD $ 33.08 /Kg |
AED 148.24 UAE Dirham |
ANSI b16 5 Lap Joint Flanges |
INR 2243.04 / Kg |
USD $ 25.22 /Kg |
AED 109.37 UAE Dirham |
ASME b16.47 Lap Joint Flanges |
INR 2000.01 / Kg |
USD $ 19.28 /Kg |
AED 100.55 UAE Dirham |
The Lap joint flanges use a stub end that is welded to the pipe. permitting easy flange alignment of the bolt holes. A lap joint flange is also called Van Stone or Stub Flange. A stub ends are available in three styles (Types A, B, and C) and two lengths (Short and Long).
Lap Joint Flanges Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
---|---|
ASME B16.5 Lap Joint Flanges Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
Lap Joint Flanges Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 Lap Joint Flanges |
Lap Joint Flanges Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS Lap Joint Flanges |
UNI | 6Bar 10Bar 16Bar 25Bar 40Bar Lap Joint Flanges |
JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K Lap Joint Flanges |
Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized Lap Joint Flanges |
EN | 6Bar 10Bar 16Bar 25Bar 40Bar Lap Joint Flanges |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Most common types of Lap Joint Flanges | Forged / Threaded / Screwed / Plate |
Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
Production technique |
|
Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
Special design | As per your drawing AS, ANSI, BS, DIN and JIS |
Origin | Indian / West Europe / Japan / USA / Korean |
Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
Lap Joint Flanges Uses & application |
|
Manufacturer of | ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
|
Export to | Saudi Arabia, Peru, Egypt, Indonesia, Brazil, Spain, USA, Canada, Ukraine, Singapore, Thailand, Oman, Ireland, Korea, Iran, India, Dubai |
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
ANSI 16.5 Lap Joint Flanges Dimensions/ Lap Joint Flange Dimensions Class 150, 150 Lb Lap Joint Flange
Nominal Bore |
Dia. (D) |
Thick. (E) |
Dia. (B) |
Dia. (A) |
Height (H) |
Nbr |
Holes |
Dia. (C) |
---|---|---|---|---|---|---|---|---|
1/2" |
90 |
11.2 |
30 |
22.9 |
16 |
4 |
15.87 |
60.3 |
3/4" |
100 |
12.7 |
38 |
28.2 |
16 |
4 |
15.87 |
69.9 |
1" |
110 |
14.3 |
49 |
34.9 |
17 |
4 |
15.87 |
79.4 |
1 1/4" |
115 |
15.9 |
59 |
43.7 |
21 |
4 |
15.87 |
88.9 |
1 1/2" |
125 |
17.5 |
65 |
50.0 |
22 |
4 |
15.87 |
98.4 |
2" |
150 |
20.7 |
78 |
62.5 |
25 |
4 |
19.05 |
120.7 |
2 1/2" |
180 |
22.3 |
90 |
75.4 |
29 |
4 |
19.05 |
139.7 |
3" |
190 |
23.9 |
108 |
91.4 |
30 |
4 |
19.05 |
152.4 |
3 1/2" |
215 |
23.9 |
122 |
104.1 |
32 |
8 |
19.05 |
177.8 |
4" |
230 |
23.9 |
135 |
116.8 |
33 |
8 |
19.05 |
190.5 |
5" |
255 |
23.9 |
164 |
144.4 |
36 |
8 |
22.22 |
215.9 |
6" |
280 |
25.4 |
192 |
171.4 |
40 |
8 |
22.22 |
241.3 |
8" |
345 |
28.6 |
246 |
222.2 |
44 |
8 |
22.22 |
298.5 |
10" |
405 |
30.2 |
305 |
277.4 |
49 |
12 |
25.40 |
362.0 |
12" |
485 |
31.8 |
365 |
328.2 |
56 |
12 |
25.40 |
431.8 |
14" |
535 |
35.0 |
400 |
360.2 |
79 |
12 |
28.57 |
476.3 |
16" |
595 |
36.6 |
457 |
411.2 |
87 |
16 |
28.57 |
539.8 |
18" |
635 |
39.7 |
505 |
462.3 |
97 |
16 |
31.75 |
577.9 |
20" |
700 |
42.9 |
559 |
514.4 |
103 |
20 |
31.75 |
635.0 |
24" |
815 |
47.7 |
663 |
616.0 |
111 |
20 |
34.92 |
749.3 |
The dimensions are in millimeters
Source : ASME B16.5
Nominal Bore |
Dia. (D) |
Thick. (E) |
Dia. (B) |
Dia. (A) |
Height (H) |
Nbr |
Holes |
Dia. (C) |
---|---|---|---|---|---|---|---|---|
1/2" |
95 |
14.3 |
38 |
22.9 |
22 |
4 |
15.87 |
66.7 |
3/4" |
115 |
15.9 |
48 |
28.2 |
25 |
4 |
19.05 |
82.6 |
1" |
125 |
17.5 |
54 |
34.9 |
27 |
4 |
19.05 |
88.9 |
1 1/4" |
135 |
19.1 |
64 |
43.7 |
27 |
4 |
19.05 |
98.4 |
1 1/2" |
155 |
20.7 |
70 |
50.0 |
30 |
4 |
22.22 |
114.3 |
2" |
165 |
22.3 |
84 |
62.5 |
33 |
8 |
19.05 |
127.0 |
2 1/2" |
190 |
25.4 |
100 |
75.4 |
38 |
8 |
22.22 |
149.2 |
3" |
210 |
28.6 |
117 |
91.4 |
43 |
8 |
22.22 |
168.3 |
3 1/2" |
230 |
30.2 |
133 |
104.1 |
44 |
8 |
22.22 |
184.2 |
4" |
255 |
31.8 |
146 |
116.8 |
48 |
8 |
22.22 |
200.0 |
5" |
280 |
35.0 |
178 |
144.4 |
51 |
8 |
22.22 |
235.0 |
6" |
320 |
36.6 |
206 |
171.4 |
52 |
12 |
22.22 |
269.9 |
8" |
380 |
41.3 |
260 |
222.2 |
62 |
12 |
25.40 |
330.2 |
10" |
445 |
47.7 |
321 |
277.4 |
95 |
16 |
28.57 |
387.4 |
12" |
520 |
50.8 |
375 |
328.2 |
102 |
16 |
31.75 |
450.8 |
14" |
585 |
54.0 |
425 |
360.2 |
111 |
20 |
31.75 |
514.4 |
16" |
650 |
57.2 |
483 |
411.2 |
121 |
20 |
34.29 |
571.5 |
18" |
710 |
60.4 |
533 |
462.3 |
130 |
24 |
34.29 |
628.6 |
20" |
775 |
63.5 |
587 |
514.4 |
140 |
24 |
34.29 |
685.8 |
24" |
915 |
69.9 |
702 |
616.0 |
152 |
24 |
41.27 |
812.8 |
The dimensions are in millimeters
Source : ASME B16.5
Lap Joint Flange Dimensions Class 600
Nominal Bore |
Dia. (D) |
Thick. (E) |
Dia. (B) |
Dia. (A) |
Height (H) |
Nbr |
Holes |
Dia. (C) |
---|---|---|---|---|---|---|---|---|
1/2" |
95 |
14.3 |
38 |
23.6 |
22 |
4 |
15.87 |
66.7 |
3/4" |
115 |
15.9 |
48 |
29.0 |
25 |
4 |
19.05 |
82.6 |
1" |
125 |
17.5 |
54 |
35.8 |
27 |
4 |
19.05 |
88.9 |
1 1/4" |
135 |
20.7 |
64 |
44.4 |
29 |
4 |
19.05 |
98.4 |
1 1/2" |
155 |
22.3 |
70 |
50.6 |
32 |
4 |
22.22 |
114.3 |
2" |
165 |
25.4 |
84 |
63.5 |
37 |
8 |
19.05 |
127.0 |
2 1/2" |
190 |
28.6 |
100 |
76.2 |
41 |
8 |
22.22 |
149.2 |
3" |
210 |
31.8 |
117 |
92.2 |
46 |
8 |
22.22 |
168.3 |
3 1/2" |
230 |
35.0 |
133 |
104.9 |
49 |
8 |
25.40 |
184.2 |
4" |
275 |
38.1 |
152 |
117.6 |
54 |
8 |
25.40 |
215.9 |
5" |
330 |
44.5 |
189 |
144.4 |
60 |
8 |
28.57 |
266.7 |
6" |
355 |
47.7 |
222 |
171.4 |
67 |
12 |
28.57 |
292.1 |
8" |
420 |
55.6 |
273 |
222.2 |
76 |
12 |
31.75 |
349.2 |
10" |
510 |
63.5 |
343 |
276.2 |
111 |
16 |
34.92 |
431.8 |
12" |
560 |
66.7 |
400 |
328.6 |
117 |
20 |
34.92 |
489.0 |
14" |
605 |
69.9 |
432 |
360.4 |
127 |
20 |
38.10 |
527.0 |
16" |
685 |
76.2 |
495 |
411.2 |
140 |
20 |
41.27 |
603.2 |
18" |
745 |
82.6 |
546 |
462.0 |
152 |
20 |
44.45 |
6654.0 |
20" |
815 |
88.9 |
610 |
512.8 |
165 |
24 |
44.45 |
723.9 |
24" |
940 |
101.6 |
718 |
614.4 |
184 |
24 |
50.80 |
838.2 |
Lap Joint Flange Dimensions Class 900
Size in Inch |
Size in mm |
Outer Diameter |
Flange Thick. |
Lapped Thick. |
Lapped ID |
PCD |
Lapped Thick. |
Lapped Radius |
No of Bolts |
Bolt Size UNC |
RF Stud Length |
Hole Size |
ISO Stud Size |
Weight in kg |
A |
B |
C |
D |
E |
G |
|||||||||
1/2 |
15 |
120 |
38 |
32 |
22.9 |
82.6 |
22.3 |
3 |
4 |
3/4 |
110 |
7/8 |
M20 |
1.8 |
3/4 |
20 |
130 |
44 |
35 |
28.2 |
88.9 |
25.4 |
3 |
4 |
3/4 |
115 |
7/8 |
M20 |
2.3 |
1 |
25 |
150 |
52 |
41 |
34.9 |
101.6 |
28.6 |
3 |
4 |
7/8 |
125 |
1 |
M24 |
3.6 |
1 1/4 |
32 |
160 |
64 |
41 |
43.7 |
111.1 |
28.6 |
5 |
4 |
7/8 |
125 |
1 |
M24 |
4.1 |
1 1/2 |
40 |
180 |
70 |
44 |
50 |
123.8 |
31.8 |
6 |
4 |
1 |
140 |
1 1/8 |
M27 |
5.5 |
2 |
50 |
215 |
105 |
57 |
62.5 |
165.1 |
38.1 |
8 |
8 |
7/8 |
145 |
1 |
M24 |
11.5 |
2 1/2 |
65 |
245 |
124 |
64 |
75.4 |
190.5 |
41.3 |
8 |
8 |
1 |
160 |
1 1/8 |
M27 |
16.5 |
3 |
80 |
240 |
127 |
54 |
91.4 |
190.5 |
38.1 |
10 |
8 |
7/8 |
145 |
1 |
M24 |
12 |
4 |
100 |
290 |
159 |
70 |
116.8 |
235 |
44.5 |
11 |
8 |
1 1/8 |
170 |
1 1/4 |
M30 |
24 |
5 |
125 |
350 |
190 |
79 |
144.4 |
279.4 |
50.8 |
11 |
8 |
1 1/4 |
190 |
1 3/8 |
M33 |
38 |
6 |
150 |
380 |
235 |
86 |
171.4 |
317.5 |
55.6 |
13 |
12 |
1 1/8 |
190 |
1 1/4 |
M30 |
50 |
8 |
200 |
470 |
298 |
114 |
222.2 |
393.7 |
63.5 |
13 |
12 |
1 3/8 |
220 |
1 1/2 |
M36 |
78 |
10 |
250 |
545 |
368 |
127 |
277.4 |
469.9 |
69.9 |
13 |
16 |
1 3/8 |
235 |
1 1/2 |
M36 |
112 |
12 |
300 |
610 |
419 |
143 |
328.2 |
533.4 |
79.4 |
13 |
20 |
1 3/8 |
255 |
1 1/2 |
M36 |
148 |
14 |
350 |
640 |
451 |
156 |
360.2 |
558.8 |
85.8 |
13 |
20 |
1 1/2 |
275 |
1 5/8 |
M39 |
182 |
16 |
400 |
705 |
508 |
165 |
411.2 |
616 |
88.9 |
13 |
20 |
1 5/8 |
285 |
1 3/4 |
M42 |
193 |
18 |
450 |
785 |
565 |
190 |
462.3 |
685.8 |
101.6 |
13 |
20 |
1 7/8 |
325 |
2 |
M48 |
258 |
20 |
500 |
855 |
622 |
210 |
514.4 |
749.3 |
108 |
13 |
20 |
2 |
350 |
2 1/8 |
M52 |
317 |
24 |
600 |
1040 |
749 |
267 |
616 |
901.7 |
139.7 |
13 |
20 |
2 1/2 |
440 |
2 5/8 |
M64 |
608 |
Lap Joint Flange Dimensions Class 1500
Size in Inch |
Size in mm |
Outer Diameter |
Flange Thick. |
Lapped Thick. |
Lapped ID |
PCD |
Lapped Thick. |
Lapped Radius |
No of Bolts |
Bolt Size UNC |
RF Stud Length |
Hole Size |
ISO Stud Size |
Weight in kg |
A |
B |
C |
D |
E |
G |
|||||||||
1/2 |
15 |
120 |
38 |
32 |
22.9 |
82.6 |
22.3 |
3 |
4 |
3/4 |
110 |
7/8 |
M20 |
1.8 |
3/4 |
20 |
130 |
44 |
35 |
28.2 |
88.9 |
25.4 |
3 |
4 |
3/4 |
115 |
7/8 |
M20 |
2.3 |
1 |
25 |
150 |
52 |
41 |
34.9 |
101.6 |
28.6 |
3 |
4 |
7/8 |
125 |
1 |
M24 |
3.7 |
1 1/4 |
32 |
160 |
64 |
41 |
43.7 |
111.1 |
28.6 |
5 |
4 |
7/8 |
125 |
1 |
M24 |
4.1 |
1 1/2 |
40 |
180 |
70 |
44 |
50 |
123.8 |
31.8 |
6 |
4 |
1 |
140 |
1 1/8 |
M27 |
5.5 |
2 |
50 |
215 |
105 |
57 |
62.5 |
165.1 |
38.1 |
8 |
8 |
7/8 |
145 |
1 |
M24 |
9.8 |
2 1/2 |
65 |
245 |
124 |
64 |
75.4 |
190.5 |
41.3 |
8 |
8 |
1 |
160 |
1 1/8 |
M27 |
16.4 |
3 |
80 |
265 |
133 |
73 |
91.4 |
203.2 |
47.7 |
10 |
8 |
1 1/8 |
180 |
1 1/4 |
M30 |
21.8 |
4 |
100 |
310 |
162 |
90 |
116.8 |
241.3 |
54 |
11 |
8 |
1 1/4 |
195 |
1 3/8 |
M33 |
33 |
5 |
125 |
375 |
197 |
105 |
144.4 |
292.1 |
73.1 |
11 |
8 |
1 1/2 |
250 |
1 5/8 |
M39 |
59 |
6 |
150 |
395 |
229 |
119 |
171.4 |
317.5 |
82.6 |
13 |
12 |
1 3/8 |
260 |
1 1/2 |
M36 |
75 |
8 |
200 |
485 |
292 |
143 |
222.2 |
393.7 |
92.1 |
13 |
12 |
1 5/8 |
290 |
1 3/4 |
M42 |
118 |
10 |
250 |
585 |
368 |
178 |
277.4 |
482.6 |
108 |
13 |
12 |
1 7/8 |
335 |
2 |
M48 |
198 |
12 |
300 |
675 |
451 |
219 |
328.2 |
571.5 |
123.9 |
13 |
16 |
2 |
375 |
2 1/8 |
M52 |
264 |
14 |
350 |
750 |
495 |
241 |
360.2 |
635 |
133.4 |
13 |
16 |
2 1/4 |
405 |
2 3/8 |
M56 |
341 |
16 |
400 |
825 |
552 |
260 |
411.2 |
704.8 |
146.1 |
13 |
16 |
2 1/2 |
445 |
2 5/8 |
M64 |
454 |
18 |
450 |
915 |
597 |
276 |
462.3 |
774.7 |
162 |
13 |
16 |
2 3/4 |
495 |
2 7/8 |
M72 |
590 |
20 |
500 |
985 |
641 |
292 |
514.4 |
831.8 |
177.8 |
13 |
16 |
3 |
540 |
3 1/8 |
M76 |
792 |
24 |
600 |
1170 |
762 |
330 |
616 |
990.6 |
203.2 |
13 |
16 |
3 1/2 |
615 |
3 5/8 |
M90 |
1248 |
Lap Joint Flange Dimensions Class 2500
Size in Inch |
Size in mm |
Outer Diameter |
Flange Thick. |
Lapped Thick. |
Lapped ID |
PCD |
Lapped Thick. |
Lapped Radius |
No of Bolts |
Bolt Size UNC |
RF Stud Length |
Hole Size |
ISO Stud Size |
Weight in kg |
A |
B |
C |
D |
E |
G |
|||||||||
1/2 |
15 |
135 |
43 |
40 |
22.9 |
88.9 |
30.2 |
3 |
4 |
3/4 |
120 |
7/8 |
M20 |
3.2 |
3/4 |
20 |
140 |
51 |
43 |
28.2 |
95.2 |
31.8 |
3 |
4 |
3/4 |
125 |
7/8 |
M20 |
3.7 |
1 |
25 |
160 |
57 |
48 |
34.9 |
108 |
35 |
3 |
4 |
7/8 |
140 |
1 |
M24 |
5 |
1 1/4 |
32 |
185 |
73 |
52 |
43.7 |
130.2 |
38.1 |
5 |
4 |
1 |
150 |
1 1/8 |
M27 |
7.5 |
1 1/2 |
40 |
205 |
79 |
60 |
50 |
146 |
44.5 |
6 |
4 |
1 1/8 |
170 |
1 1/4 |
M30 |
10 |
2 |
50 |
235 |
95 |
70 |
62.5 |
171.4 |
50.9 |
8 |
8 |
1 |
180 |
1 1/8 |
M27 |
17.5 |
2 1/2 |
65 |
265 |
114 |
79 |
75.4 |
196.8 |
57.2 |
8 |
8 |
1 1/8 |
195 |
1 1/4 |
M30 |
23 |
3 |
80 |
305 |
133 |
92 |
91.4 |
228.6 |
66.7 |
10 |
8 |
1 1/4 |
220 |
1 3/8 |
M33 |
37.8 |
4 |
100 |
355 |
165 |
108 |
116.8 |
273 |
76.2 |
11 |
8 |
1 1/2 |
255 |
1 5/8 |
M39 |
57 |
5 |
125 |
420 |
203 |
130 |
144.4 |
323.8 |
92.1 |
11 |
8 |
1 3/4 |
300 |
1 7/8 |
M45 |
95 |
6 |
150 |
485 |
235 |
152 |
171.4 |
368.3 |
108 |
13 |
8 |
2 |
345 |
2 1/8 |
M52 |
148 |
8 |
200 |
550 |
305 |
178 |
222.2 |
438.2 |
127 |
13 |
12 |
2 |
380 |
2 1/8 |
M52 |
221 |
10 |
250 |
675 |
375 |
229 |
277.4 |
539.8 |
165.1 |
13 |
12 |
2 1/2 |
490 |
2 5/8 |
M64 |
425 |
12 |
300 |
760 |
441 |
254 |
328.2 |
619.1 |
184.2 |
13 |
12 |
2 3/4 |
540 |
2 7/8 |
M72 |
500 |
Flanges pressure rating in psig for Socket Weld Flange ASME |
|||||||
Temperature (F°) |
150# |
300# |
400# |
600# |
900# |
1500# |
2500# |
-20 to 100 |
285 |
740 |
985 |
1480 |
2220 |
3705 |
6170 |
200 |
260 |
680 |
905 |
1360 |
2035 |
3395 |
5655 |
300 |
230 |
655 |
870 |
1310 |
1965 |
3270 |
5450 |
400 |
200 |
635 |
845 |
1265 |
1900 |
3170 |
5280 |
500 |
170 |
605 |
805 |
1205 |
1810 |
3015 |
5025 |
600 |
140 |
570 |
755 |
1135 |
1705 |
2840 |
4730 |
650 |
125 |
550 |
730 |
1100 |
1650 |
2745 |
4575 |
700 |
110 |
530 |
710 |
1060 |
1590 |
2655 |
4425 |
750 |
95 |
505 |
675 |
1015 |
1520 |
2535 |
4230 |
800 |
80 |
410 |
550 |
825 |
1235 |
2055 |
3430 |
850 |
65 |
320 |
425 |
640 |
955 |
1595 |
2655 |
900 |
50 |
230 |
305 |
460 |
690 |
1150 |
1915 |
950 |
35 |
135 |
185 |
275 |
410 |
685 |
1145 |
1000 |
20 |
85 |
115 |
170 |
255 |
430 |
715 |
JIS 16K Lap Joint Flange Dimensions, JIS 20K Lap Joint Flange Dimensions
Nominal | Outside | Inside | Outside | Sectional Dimensions of Flange | Bolt Hole | Nominal | Approx. | |||||||||
Dia. of | Dia. of | Dia. of | Dia. of | t | T | Dia. of Hub | r | Dia. of | Dia. of | Bolt. | Number | Hole | Bolt | Weight | ||
Flange | Steel | Flange | Flange | a | b | Face | Raised Face | Circle | of Bolt | Dia. | Size | (kg) | ||||
Pipe | do | D | f | g | Dia | Holes | h | BL | SOH | |||||||
10 | 17.3 | 17.8 | 90 | 12 | 16 | 26 | 28 | 4 | 1 | 46 | 65 | 4 | 15 | M12 | 0.53 | 0.52 |
15 | 21.7 | 22.2 | 95 | 12 | 16 | 30 | 32 | 4 | 1 | 51 | 70 | 4 | 15 | M12 | 0.6 | 0.58 |
20 | 27.2 | 27.7 | 100 | 14 | 20 | 38 | 42 | 4 | 1 | 56 | 75 | 4 | 15 | M12 | 0.79 | 0.75 |
25 | 34 | 34.5 | 125 | 14 | 20 | 46 | 50 | 4 | 1 | 67 | 90 | 4 | 19 | M16 | 1.22 | 1.16 |
32 | 42.7 | 43.2 | 135 | 16 | 22 | 56 | 60 | 5 | 2 | 76 | 100 | 4 | 19 | M16 | 1.66 | 1.53 |
40 | 48.6 | 49.1 | 140 | 16 | 24 | 62 | 66 | 5 | 2 | 81 | 105 | 4 | 19 | M16 | 1.79 | 1.64 |
50 | 60.5 | 61.1 | 155 | 16 | 24 | 76 | 80 | 5 | 2 | 96 | 120 | 8 | 19 | M16 | 2.09 | 1.83 |
65 | 76.3 | 77.1 | 175 | 18 | 26 | 94 | 98 | 5 | 2 | 116 | 140 | 8 | 19 | M16 | 3.08 | 2.58 |
80 | 89.1 | 90 | 200 | 20 | 28 | 108 | 112 | 6 | 2 | 132 | 160 | 8 | 23 | M20 | 4.41 | 3.61 |
-90 | 101.6 | 102.6 | 210 | 20 | 30 | 120 | 124 | 6 | 2 | 145 | 170 | 8 | 23 | M20 | 4.92 | 3.89 |
100 | 114.3 | 115.4 | 225 | 22 | 34 | 134 | 138 | 6 | 2 | 160 | 185 | 8 | 23 | M20 | 6.29 | 4.87 |
125 | 139.8 | 141.2 | 270 | 22 | 34 | 164 | 170 | 6 | 2 | 195 | 225 | 8 | 25 | M22 | 9.21 | 7.09 |
150 | 165.2 | 166.6 | 305 | 24 | 38 | 196 | 202 | 6 | 2 | 230 | 260 | 12 | 25 | M22 | 12.7 | 9.57 |
200 | 216.3 | 218 | 350 | 26 | 40 | 244 | 252 | 6 | 2 | 275 | 305 | 12 | 25 | M22 | 18.4 | 12 |
250 | 267.4 | 269.5 | 430 | 28 | 44 | 304 | 312 | 6 | 2 | 345 | 380 | 12 | 27 | M24 | 30.4 | 20.1 |
300 | 318.5 | 321 | 480 | 30 | 48 | 354 | 364 | 8 | 3 | 395 | 430 | 16 | 27 | M24 | 40.5 | 24.3 |
350 | 355.6 | 358.1 | 540 | 34 | 52 | 398 | 408 | 8 | 3 | 440 | 480 | 16 | 33 | M30×3 | 57.5 | 34.4 |
400 | 406.4 | 409 | 605 | 38 | 60 | 446 | 456 | 10 | 3 | 495 | 540 | 16 | 33 | M30×3 | 81.7 | 47.4 |
450 | 457.2 | 460 | 675 | 40 | 64 | 504 | 514 | 10 | 3 | 560 | 605 | 20 | 33 | M30×3 | 107 | 61.8 |
500 | 508 | 511 | 730 | 42 | 68 | 558 | 568 | 10 | 3 | 615 | 660 | 20 | 33 | M30×3 | 132 | 73.7 |
-550 | 558.8 | 562 | 795 | 44 | 70 | 612 | 622 | 10 | 3 | 670 | 720 | 20 | 39 | M36×3 | 163 | 87.9 |
600 | 609.6 | 613 | 845 | 46 | 74 | 666 | 676 | 10 | 3 | 720 | 770 | 24 | 39 | M36×3 | 192 | 98.4 |
650 | 660.4 | 664 | 895 | 48 | 77 | 704 | 726 | 10 | 5 | 770 | 820 | 24 | 39 | M36×3 | – | – |
700 | 711.2 | 715 | 960 | 50 | 80 | 754 | 776 | 10 | 5 | 820 | 875 | 24 | 42 | M39×3 | – | – |
750 | 762 | 766 | 1020 | 52 | 83 | 806 | 832 | 10 | 5 | 880 | 935 | 24 | 42 | M39×3 | – | – |
800 | 812.8 | 817 | 1085 | 54 | 86 | 865 | 885 | 10 | 5 | 930 | 990 | 24 | 48 | M45×3 | – | – |
850 | 863.6 | 868 | 1135 | 56 | 89 | 916 | 936 | 10 | 5 | 980 | 1040 | 24 | 48 | M45×3 | – | – |
900 | 914.4 | 919 | 1185 | 58 | 93 | 968 | 986 | 10 | 5 | 1030 | 1090 | 28 | 48 | M45×3 | – | – |
1000 | 1016 | 1021 | 1320 | 62 | 99 | 1070 | 1098 | 12 | 5 | 1140 | 1210 | 28 | 56 | M52×3 | – | – |
1100 | 1117.6 | 1123 | 1420 | 66 | 105 | 1180 | 1200 | 12 | 15 | 1240 | 1310 | 32 | 56 | M52×3 | – | – |
1200 | 1219.2 | 1225 | 1530 | 70 | 112 | 1282 | 1302 | 12 | 5 | 1350 | 1420 | 32 | 56 | M52×3 | – | – |
1300 | 1320.8 | 1326 | 1645 | 74 | – | – | – | – | 5 | 1450 | 1530 | 32 | 62 | M56×3 | – | – |
1350 | 1371.6 | 1377 | 1700 | 76 | – | – | – | – | 5 | 1510 | 1590 | 32 | 62 | M56×3 | – | – |
1400 | 1422.4 | 1428 | 1755 | 78 | – | – | – | – | 5 | 1560 | 1640 | 36 | 62 | M56×3 | – | – |
1500 | 1524 | 1529 | 1865 | 80 | – | – | – | – | 5 | 1670 | 1750 | 36 | 62 | M56×3 | – | – |
|
|
Lap Joint Flanges Class 900 |
Lap Joint Flanges Flat Face |
Lap Joint Flanges Pn16 |
Kf Lap Joint Flanges |
Lap Joint Flanges Class 2500 |
Lap Joint Flanges Slip On |
Lap Joint Flanges Din 2527 |
Lap Joint Flanges Weight 150# |
Lap Joint Flanges Din 2576 |
Lap Joint Flanges With 1/2 Npt
|
Lap Joint Flanges Pn 64 |
Lap Joint Flanges Ansi B16.5 150 |
Lap Joint Flanges Class 150 |
Lap Joint Flanges Threaded |
Lap Joint Flanges Pn10 |
Lap Joint Flanges B16.47 |
Lap Joint Flanges Pn40 |
Lap Joint Flanges Rtj 900 |
Lap Joint Flanges Pn 160 |
Lap Joint Flanges Rtj |
Lap Joint Flanges Class 1500 |
Lap Joint Flanges Npt |
Lap Joint Flanges Dn150 Pn16 |
Lap Joint Flanges Jis 5k |
Lap Joint Flanges Class 600 |
Lap Joint Flanges Jis B2220 |
Lap Joint Flanges Asme B16.5 Class 300 |
Lap Joint Flanges Ring Type Joint |
Lap Joint Flanges Din 2633 |
Lap Joint Flanges Rtj 1500 |
Lap Joint Flanges Class 300 |
Lap Joint Flanges With Threaded Hole |
Lap Joint Flanges Din En 1092-1 |
Lap Joint Flanges Jis 10k |
Stainless Steel Lap Joint Flanges | ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
Carbon Steel Lap Joint Flanges | ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
Titanium Lap Joint Flanges | ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
Alloy Steel Lap Joint Flanges | ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91 |
Copper Nickel Lap Joint Flanges | ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
Copper Lap Joint Flanges | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
Inconel Lap Joint Flanges | ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 Lap Joint Flanges |
Brass Lap Joint Flanges | 3602 / 2604 / H59 / H62 / etc. |
Monel Lap Joint Flanges | ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
Hastelloy Lap Joint Flanges | ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges |
Aluminium Lap Joint Flanges | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
Alloy 20 Lap Joint Flanges | ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
Duplex Lap Joint Flanges | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Nickel Lap Joint Flanges | ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
Incoloy Lap Joint Flanges | ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges |
Super Duplex Lap Joint Flanges | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
Other Lap Joint Flanges material | Tin bronze, Alumunum bronze, Lead bronze |
Nimonic Lap Joint Flanges | Nimonic 75, Nimonic 80A, Nimonic 90 |
254 Smo Lap Joint Flanges | ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |
ASME B16.47 Lap Joint Flange |
Metric Lap Joint flange |
JIS Loose Flange |
Lap Joint Flanges ANSI |
ASME B16.47 Series A and B Loose Flanges |
JIS Lap Joint flange |
ANSI B16.5 Lap Joint Flanges |
Lap Joint Flange Dimensions |
Lap Joint Flange Flat Face |
ASME B16.47 Series A and B Loose Flanges Exporter |
ANSI B16.5 class 150 Loose Flange |
30 Inch Lap Joint flange |
Lap Joint Flange UNI 6090 |
High Quality Loose Flanges |
Lap Joint Raised Face Flange |
JIS 10K Lap Joint Flange |
JIS 16K Lap Joint Flange |
Metric Lap Joint flange |
ASME B16.5 Loose Flanges |
Raised Faced Lap Joint Flanges |
36 Inch Lap joint flange |
ANSI 150 Lap Joint Flange |
Lap Joint Flange Class 300 |
Lap Joint Flanges EN 1092-1 |
Lap Joint flange High Temperature |
ANSI B16.5 Class 150 Lap Joint Flanges |
Find here Lap Joint Flange Thickness Calculation Formula Xls, Lap Joint Flange Schedule Chart, Lap Joint Flange Flat Face & Raised Face Dimensions, Lap Joint Flange Thickness Calculation For Pressure Vessel
|
|
|
|